Abstract:The small scale Organic Rankine Cycle (ORC) using a turbine as expanders is considered as one of the most efficient ways to convert the waste heat energies of automobile engine into electrical energy, in the power range from several kW up to dozens of kW. In general, two important factors must be taken into account when designing the ORC turbine: the real gas effects of the organic fluid and the high expansion ratio presented in the machinery due to thermodynamic and efficiency factors. The characteristic parameters of R245fa have great difference compared with air. When designing an ORC turbine, the initial problem is the influence of the working fluid characteristic parameters on the turbine performance. Similarity analysis method is used to analyze this problem. When using the similarity theory to design two similar operating conditions, gas constant R and dynamic viscosity μ are easy to be taken into account as they have a dimension; specific heat ratio κ is hard to be taken into consideration. In this paper, a high expansion ratio ORC turbine is generated for a small scale ORC system working with the organic fluid R245fa, and the influence of κ on the turbine performance parameters analyzed. Firstly, the turbine geometry is designed in an iterative process using the commercial design tool Concepts-NREC Rital program, and the designed operating condition is determined. Secondly, the similarity criterion numbers are deduced with no consideration of the specific heat ratio κ, and the similar operating condition is calculated by the deduced similarity criterion numbers. The results achieved by the one-dimensional design software Rital shows that the deviation of similarity criterion numbers is small, which indicates that the two operating conditions are similar. Then, to verify the conclusion above, the flow field simulation using one channel model is conducted based on the R245fa operating condition and air operating condition using the computational fluid dynamics (CFD) code NUMECA-FineTurbo. However, deviations of the similarity criterion numbers from the CFD results are more than twice to those from the one-dimensional results. The larger deviation may indicate that the influence of the specific heat ratio κ cannot be ignored. After that, the distributions of the total pressure, total temperature, the relative Ma number and entropy in the nozzle and rotor channel are compared. These results show that except the total temperature the distributions of the other three parameters are very similar. The similar distribution may indicate that the specific heat ratio κ has little influence on the efficiency and expansion ratio, but κ has greater influence on the temperature and output power. All of these conclusions are made according to the simulation results, the accuracy should be verified through the test results.

Sensitivity analysis of operation parameters on the system performance of organic rankine cycle system using orthogonal experiment

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Cooperative Optimization of System Parameters and Heat Exchanger Structure for Geothermal Organic Rankine Cycle

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Integrated Operation Design and Control of Organic Rankine Cycle Systems with Disturbances

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Experimental study on operating parameters matching characteristic of the organic Rankine cycle for engine waste heat recovery

Parametric Design and Off-Design Analysis of Organic Rankine Cycle (ORC) System

Performance Analyses of Transcritical Organic Rankine Cycles with Large Variations of the Thermophysical Properties in the Pseudocritical Region

Simulations on Organic Rankine cycle with quasi two-stage expander under cross-seasonal ambient conditions

Analysis of the Thermodynamic Performance Limits of the Organic Rankine Cycle in Low and Medium Temperature Heat Source Applications

Thermodynamic analysis of working fluids: What is the highest performance of the sub- and trans-critical organic Rankine cycles?

Thermodynamic Analysis and Optimization of Organic Rankine Cycles Based on Radial-Inflow Turbine Design

The Influence of Working Fluid Characteristic Parameters on Turbine Performance for the Small Scale ORC System

Experimental study of the external load characteristics on a micro-scale organic Rankine cycle system

Effect of heat source supplies on system behaviors of ORCs with different capacities: An experimental comparison between the 3 kW and 10 kW unit

Operation characteristics and performance prediction of a 3 kW organic Rankine cycle (ORC) with automatic control system based on machine learning methodology

Control strategies of pumps in organic Rankine cycle under variable condensing conditions