Abstract:In organic Rankine cycle (ORC) system, the selection of the structure and the optimization of operating parameters are usually studied separately, which makes the existing design principles inadequate to describe the impacts of the structure on ORC performance, and thus greatly limits its practical applications. To this end, this paper addresses an automated scheme for the optimal configuration of the ORC system, aiming to simultaneously determine the working fluid, the structure and the operating parameters corresponding to the maximal system efficiency. In this work, a comprehensive simulation and optimization of four common ORC structures is first conducted with 18 working fluid candidates and the most common heat sources with the inlet temperature ranging at 200-120 degrees C. The influence mechanisms of the ORC structure on the thermodynamic performance of the ORC system are then explored to generalize the qualitative and quantitative principles for ORC configuration. Results show that, for the single-pressure evaporation ORC (SPC) with a given inlet temperature of the heat source, the Pinch point type formed by the working fluid and the heat source changes from vaporization Pinch point (VPP) to VPP&PPP (preheat Pinch point) and then to PPP as the critical temperature of the working fluid decreases. The system efficiency of SPC reaches its maximum when the double Pinch point of VPP and PPP is formed and double-pressure evaporation ORC (DPC) reaches its maximum system efficiency when the double Pinch points of HVPP and LVPP are formed. Besides, it is found that when compared with the basic ORC, the regenerative ORC enables to improve the thermal efficiency and system efficiency of the system at the same time, whereas the bleeding regenerative ORC increases the thermal efficiency while reduces the system efficiency. For the DPC, the type of Pinch point formed by the heat source and the working fluid in the optimal working condition is the key to determine whether a system has multiple evaporation potential. Specially, for the heat source with variable inlet temperature, a linear relationship between the inlet temperature of the heat source and the critical temperature of the working fluid can be established to determine the multiple evaporation potential of a certain working fluid. Based on these results, an automatic scheme for ORC configuration is developed and expected to provide an effective guidance for the selection of working fluid, configuration optimization and parameter determination of the actual ORC heat recovery process.

Control strategies of pumps in organic Rankine cycle under variable condensing conditions

Techno-economic Analysis on a Small-Scale Organic Rankine Cycle with Improved Thermal Driven Pump

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Regulation strategies and optimizations of the expander and pump in organic Rankine cycle under off-design conditions

Simulations on Organic Rankine cycle with quasi two-stage expander under cross-seasonal ambient conditions

Experimental Study on Multi-Stage Gas-Liquid Booster Pump for Working Fluid Pressurization

Off-design Performance Comparison of an Organic Rankine Cycle under Different Control Strategies

Synthesis and simultaneous optimization of multi-heat source multi-pressure evaporation organic Rankine cycle with mixed working fluid

Analysis of working fluid for Organic Rankine Cycle

EXPERIMENTAL STUDY OF ORGANIC RANKINE CYCLE SYSTEM USING SCROLL EXPANDER AND DIAPHRAGM PUMP AT DIFFERENT CONDENSING TEMPERATURES

Experimental Study of the Organic Rankine Cycle under Different Heat and Cooling Conditions

Multi-objective Optimization of Low Temperature Cooling Water Organic Rankine Cycle Using Dual Pinch Point Temperature Difference Technologies

Automated Configuration of Organic Rankine Cycle System Based on Process Simulations

Performance Simulation of a Twin-screw Expander Using R513A as Working Fluid in Organic Rankine Cycle System

Multi-condition Operating Characteristics and Optimization of a Small-Scale ORC System

Experimental and Modeling Investigation of an Organic Rankine Cycle System Based on the Scroll Expander

Effect of Evaporation Temperature on the Performance of Organic Rankine Cycle in Near-Critical Condition

Thermodynamic and Economic Optimization of a Double-Pressure Organic Rankine Cycle Driven by Low-Temperature Heat Source

Operation of an Organic Rankine Cycle Dependent on Pumping Flow Rates and Expander Torques

Analysis of the Thermodynamic Performance Limits of the Organic Rankine Cycle in Low and Medium Temperature Heat Source Applications

Off-Design Performance Comparative Analysis Between Dual-Pressure Organic Rankine Cycles Using Pure and Mixture Working Fluids