Abstract:The use of carbon fiber-reinforced resin matrix composites instead of metals to manufacture cryogenic propellant tanks for spacecrafts is a development trend in the world aerospace industry. Cryogenic mechanical properties of the composites should be investigated in detail due to that the ultra-low temperature environment may cause micro cracks in the composites, leading to propellant leakage. In the present study, cryogenic tensile properties of a carbon fiber reinforced silicon-containing epoxy resin aomposite are investigated using experimental and numerical simulation methods. A silicon-containing epoxy resin with excellent cryogenic mechanical properties is developed by introducing a synthesized organic silicon polymer epoxidized polysiloxane and Nano-SiO2 into bisphenol F type epoxy resin. The tensile strength and modulus of the silicon-containing epoxy resin at -180 °C are 202.63 MPa and 7.81 GPa, which are 16.71% and 3.03% higher than those of bisphenol F type epoxy resin. The tensile strength of the silicon-containing epoxy resin at -180 °C is increased by 107.7% compared to that at room temperature, and the modulus at -180 °C is nearly twice that at room temperature. The carbon fiber reinforced silicon-containing epoxy resin composite is prepared by vacuum injection molding. The finite element model for the representative volume element of the composite unidirectional plate is established. The random sequence expansion method is used to randomly distribute the carbon fibers and simulate the thermal residual stress, the elastic performance, and the damage of the composite at cryogenic environments. Through comparison, it is found that the simulation results are in good agreement with the experimental results. The simulation reliability for cryogenic mechanical properties of carbon fiber reinforced resin matrix composites is verified. It is expected to provide a reference for the analysis and evaluation of cryogenic mechanical properties of composite tanks.

Prediction on Residual Stresses of Carbon/epoxy Composite at Cryogenic Temperature

Mechanism of Matrix Influencing the Cryogenic Mechanical Property of Carbon Fibre Reinforced Epoxy Resin Composite

Simulation analysis of cryogenic mechanical properties of carbon fiber reinforced silicon-containing epoxy resin composite

Cryogenic mechanical properties of unidirectional carbon fiber reinforced epoxy composite

Simulation and Measurement of Cryogenic-Interfacial-properties of T700/modified Epoxy for Composite Cryotanks

Internal Stress Analysis of Epoxy Adhesively‐boned Joints Based on Their Thermomechanical Properties at Cryogenic Temperature

Cryogenic Mechanics and Damage Behaviors of Carbon Fiber Reinforced Polymer Composites

Mechanical Response and Failure of 3D MWK Carbon/epoxy Composites at Cryogenic Temperature

Temperature Effects on Transverse Failure Modes of Carbon Fiber/bismaleimides Composites

Cryogenics performance enhancement of epoxy resin composites through negative expansion nanomaterials: Mechanism and predictive modeling

Preparation, Characterization, and Curing Kinetics of Elevated and Cryogenic Temperature-Resistant Epoxy Resin Composites

Mechanical analysis of multilayer composite materials with duroplastic matrix after exposure to low temperatures

Cryogenic Compression Properties and Failure Mechanism of Lightweight 3D MWK Carbon Fabric Reinforced Epoxy Composites

Cryogenic damage behavior of carbon fiber reinforced polymer composite laminates via fiber-optic acoustic emission

Interface properties of carbon fiber reinforced cyanate/epoxy resin composites at cryogenic temperature

Influence of flexible molecular structure on the cryogenic mechanical properties of epoxy matrix and carbon fiber/epoxy composite laminate

Mode I Fracture Toughness with Fiber Bridging of Unidirectional Composite Laminates under Cryogenic Temperature

Study on the Mechanical Performances of Carbon Fiber/epoxy Composite Material Subjected to Dynamical Compression and High Temperature Loads

Cryogenic Damage Mechanisms of CFRP Laminates Based on In-Situ X-ray Computed Tomography Characterization

Tensile and Interfacial Properties of Dry-Jet Wet-Spun and Wet-Spun Polyacrylonitrile-Based Carbon Fibers at Cryogenic Condition

Cryogenic Thermal Conductivity of Carbon Fiber Reinforced Polymer Composite Laminates