Abstract:The dynamic load effect of supports is mainly caused by the movement of the roof structure and the load transfer of overburden. In view of the practice issue that the phenomenon of strong ground pressure is easy to happen, when the working face of the lower coal seam passes the inclined coal pillar in shallow buried closely multiple-seam, it will lead to supprot damaged. This paper takes the mining of over-inclined coal pillars in the 22410 working face of the Bulianta Coal Mine as the background, based on the research method combining the field measurement, physical simulation experiment, and numerical calculation, the evolution law of the front abutment pressure (FAP) and roof weighting in mining under the inclined coal pillar is analyzed, and the mechanism of the stress transfer of the inclined coal pillar and the dynamic load of the support is revealed. The research shows that the concentrated stress of the coal pillar is jointly borne by the front coal wall of the working face and the interburden structure above the support. The vertical stress transmitted from the coal pillar to the floor acts on the key blocks of the interburden of the lower coal seam, which causes strong pressure and dynamic load effect, such as roof structure cut-off. The periodic breaking of the key stratum of the interburden leads to the development height and range of the cracks increasing stepwise. The partition characteristics of the mutual transformation of the interburden stress, the FAP, and the working resistance (WR) by passing the coal pillar stage are revealed, which is divided into three stages and four regions. With the working face passing through the inclined coal pillar, the influence area of the concentrated stress of the coal pillar is reduced, and the peak stress of the coal pillar is gradually transferred to the outside of the coal pillar. When the working face is 5 m away from the coal pillar, the peak of FAP and WR reaches the maximum values, the roof is cutting along the peak stress line, and the working face has a strong weighting phenomenon. The research results are consistent with the field measurement results, providing a reference for the mining of working faces under similar conditions.

Analysis of Strata Behavior Process Characteristics of Gob-Side Entry Retaining with Roof Cutting and Pressure Releasing Based on Composite Roof Structure

An exploration of improving stability of gob-side entry retained with graded and zoned pressure relief technology: a case study

Parameter determination and effect evaluation of gob-side entry retaining by directional roof cutting and pressure releasing

Study on Key Parameters of Roof Cutting and Pressure Release in Medium-Thickness Coal Seam

Research on the Stability Mechanism of the Surrounding Rock of Gob-Side Entry Retaining by Roof Cutting in Dianping Coal Mine

Research on the coupled support technology of a composite rock beam-retained roadway roof under close coal seams

Parameters and surrounding rock control of gob-side driving under double key stratum after roof cutting

Characteristics of Strata Behavior and Differentiated Control of Fully Mechanized Mining Working Face with Abnormal Roof

Overburden Stress Arch Elevation Effect Induced by Roof Cutting and Destress Technique in Coal Mine Longwall Panel and Its Control Mechanism to Entry Surrounding Rock

Study on Fracture Behavior of Directly Covered Thick Hard Roof Based on Bearing Capacity of Supports

Analysis on Mine Strata Pressure Behavior Law of Coal Mining Face in Thin Seam with Soft Roof and Floor

Filling wall mechanical analysis of gob-side entry retaining with composite roof

Analysis on fracture mechanics theory of roof cutting instability mechanism with large mining height face in shallow coal seam

The entry retained along gob side with small coal pillar and its surrounding rock control: a case study

Mine Pressure Behavior of Gob-Side Entry Retaining by Roof Cutting in Closely Spaced Coal Seams

Investigation on the Influence of Abutment Pressure on the Stability of Rock Bolt Reinforced Roof Strata Through Physical and Numerical Modeling

Numerical Investigation of the Influence of Roof-Cutting Parameters on the Stability of Top Coal Gob-Side Entry Retaining by Roof Pre-Fracturing in Ultra-Thick Coal Seam

Stability Control of a Roadway Surrounding Rock during the Cutting and Pressure Relief of a Coal-Bearing Roof at a Shallow Mining Depth

Sensitivity analysis of influencing factors and control technology for coalface failure

Research on Roof Load Transfer by Passing Coal Pillar of Working Face in Shallow Buried Closely Multiple-Seam

Failure characteristics and stability control technology of dynamic pressure roadway affected by the mining activity: A case study