Abstract:The present study reports the influence of graphene layers on the tribological performance of CVD diamond films when they are used as the solid lubricants. Friction tests are conducted on a ball-on-plate friction tester, where the stainless steel is used as the counterpart material. The CVD diamond film sample is a typical microcrystalline diamond (MCD) coating which is deposited on a flat tungsten carbide substrate using the hot filament chemical vapor deposition method (HFCVD). Besides the MCD sample, a polished MCD film (pMCD) and a polished tungsten carbide (pWC) are also adopted in frictional tests, aiming at illustrating the influence of the surface morphology, as well as the physical property, of the sample on the lubricative effect of graphene layers. The experimental results show that graphene layers can effectively reduce the coefficient of friction (COF), regardless of the samples. The MCD sample presents the lowest stable COF, which is 0.13, in dry sliding period when the graphene flakes are sparyed on the sliding interface; while the pMCD and pWC samples exhibit slightly higher COFs, which are 0.16 and 0.18, respectively. Comparatively, the COFs of these three samples obtained in dry sliding process without graphene are 0.20, 0.25 and 0.64. In additon, the MCD sample exhibits a much longer stable dry slidng process which is more than 5000 cycles. Comparatively, the other two tribo-pairs only exhibit a stable low-COF dry sliding period for around 2000 cycles. The reduction of COF could be attributed to the graphene flakes adhered on the sliding interface. It forms a layer of solid lubricative film with extremely low shear strength and significantly decreases the interactions between two contacted surfaces. The rugged surface of the MCD film provides sufficient clogging locations for graphene flakes, which allows the generated lubricative film enduring a long sliding duration. It can be arrived from this study that the tribological properties of the MCD film could be enhanced by simply adoping graphene layers as a solid lubricant. Furthermore, an improved performance of a variety of MCD coated cutting tools or mechanical components could be expected when they are utilized with graphene layers.

Cathodic Electrophoretic Deposition of Magnesium Nitrate Modified Graphene Coating As a Macro-Scale Solid Lubricant

Study on the Friction Reducing Effect of Graphene Coating Prepared by Electrophoretic Deposition

Substrate‐dependent Enhancement of the Durability of EPD Graphene Coating As a Macroscale Solid Lubricant

Enhancement on the tribological performance of diamond films by utilizing graphene coating as a solid lubricant

Macroscale Superlubricity Achieved on the Hydrophobic Graphene Coating with Glycerol.

Investigating Tribological Properties of Electrophoretically Deposited Graphene Nanoplatelets Coatings on Mild Steel

The Influence of Normal Load on the Tribological Performance of Electrophoretic Deposition Prepared Graphene Coating on Micro-Crystalline Diamond Surface

Self-Assembled Graphene Film As Low Friction Solid Lubricant in Macroscale Contact

Pencil Sketch Graphene Films As Solid Lubricant on Steel Surface: Observation of Transition to Grapehene/amorphous Carbon

Fluorinated Graphene: A Promising Macroscale Solid Lubricant under Various Environments.

Polycarboxylate superplasticizer modified 3D graphene as long-term-efficient water-based lubricating additive under heavy load conditions

Synergistic Friction-Reducing and Anti-Wear Behaviors of Graphene with Micro- and Nano-Crystalline Diamond Films

Macroscale Superlubricity and Durability of in Situ Grown Hydrogenated Graphene Coatings

High Loading Capacity and Wear Resistance of Graphene Oxide/Organic Molecule Assembled Multilayer Film

Macroscale Superlubricity Enabled by the Synergy Effect of Graphene-Oxide Nanoflakes and Ethanediol

Modified graphene as novel lubricating additive with high dispersion stability in oil

PEGlated graphene as nanoadditive for enhancing the tribological properties of water-based lubricants

Study on the Lubricating Characteristics of Graphene Lubricants

Zinc aluminum-layered double hydroxide(LDH)-graphene oxide(GO) lubricating and corrosion-resistant composite coating on the surface of magnesium alloy

Mussel-inspired Graphene Film with Enhanced Durability As a Macroscale Solid Lubricant.

Enhanced Tribological Performance of CVD Diamond Films Enabled by Using Graphene Layers As Solid Lubricant