Abstract:Hydrothermal deposition is emerging as a highly potential route for antimony-based solar cells, in which the Sb2(S,Se)3 is typically in situ grown on a common toxic CdS buffer layer. The narrow band gap of CdS causes a considerable absorption in the short-wavelength region and then lowers the current density of the device. Herein, TiO2 is first evaluated as an alternative Cd-free buffer layer for hydrothermally derived Sb2S3 solar cells. But it suffers from a severely inhomogeneous Sb2S3 coverage, which is effectively eliminated by inserting a Zn(O,S) layer. The surface atom of sulfur in Zn(O,S) uniquely provides a chemical bridge to enable the quasi-epitaxial deposition of Sb2S3 thin film, confirming by both morphology and binding energy analysis using DFT. Then the results of the first-principles calculations also show that Zn(O,S)/Sb2S3 has a more stable structure than TiO2/Sb2S3. The resultant perfect Zn(O,S)/Sb2S3 junction, with a suitable band alignment and excellent interface contact, delivers a remarkably enhanced JSC and VOC for Sb2S3 solar cells. The device efficiency with the TiO2/Zn(O,S) buffer layer boosts from 0.54% to 3.70% compared with the counterpart of TiO2, which has a champion efficiency of Cd-free Sb2S3 solar cells with a structure of ITO/TiO2/Zn(O,S)/Sb2S3/Carbon/Ag by in situ hydrothermal deposition. This work provides a guideline for the hydrothermal deposition of antimony-based films upon a nontoxic buffer layer.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12501.Additional some crystal structures, band gap, and surface morphology of buffer layer and device, and some photoelectric characteristics of the Sb2S3 solar cells with Zn(O,S) (PDF)This article has not yet been cited by other publications.

Template Deposition of Sb2S3 for Solid-State Sensitized Solar Cells

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Surface Treatment Processed Electron Transport Layers for Efficient Sb2S3 Solar Cells

Phosphotungstic Acid Regulated Chemical Bath Deposition of Sb2S3 for High‐Efficiency Planar Heterojunction Solar Cell

Sequential Deposition Route to Efficient Sb2S3 Solar Cells

A Novel Multi‐sulfur Source Collaborative Chemical Bath Deposition Technology Enables 8%‐efficiency Sb2S3 Planar Solar Cells

Efficient Sb2Se3 Sensitized Solar Cells Prepared Through a Facile SILAR Process and Improved Performance by Interface Modification

Efficient In Situ Sulfuration Process in Hydrothermally Deposited Sb2S3 Absorber Layers

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

A Novel Multi-Sulfur Source Collaborative Chemical Bath Deposition Technology Enables 8%-Efficiency Sb2 S3 Planar Solar Cells.

Oxygen‐Assisted Tailoring of Evaporated PbS Hole Transport Layer for Highly Efficient Antimony Sulfide Solar Cells

Enhanced Photovoltaic Performance of Sb2S3-sensitized Solar Cells Through Surface Treatments

Zn(O,S) Buffer Layer for in Situ Hydrothermal Sb 2 S 3 Planar Solar Cells

Sb2s3 Seed-Mediated Growth Of Low-Defect Sb2s3 On A Tio2 Substrate For Efficient Solar Cells

Confined‐space selenium assisted tellurization post‐treatment strategy for efficient full‐inorganic Sb2S3 thin film solar cells

Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells

Microstructural and Optical Properties of Sb2S3 Film Thermally Evaporated from Antimony Pentasulfide and Efficient Planar Solar Cells

Over 6% Certified Sb2(S,Se)3 Solar Cells Fabricated Via in Situ Hydrothermal Growth and Postselenization

Engineering the charge extraction and trap states of Sb 2 S 3 solar cells