Abstract:Highly stable, low phase noise microwave oscillators are essential for various applications. An optoelectronic oscillator (OEO) can overcome the short-term phase noise limitation of pure electronic oscillators at high oscillation frequency. Nonetheless, the long-term frequency stability should be addressed. To stabilize the frequency of OEO, a phase-locked loop (PLL) is widely used to synchronize the OEO to a stable reference. However, due to the narrow free-spectral-range (FSR) of the oscillation cavity of the OEO, the pull-in range of the PLL is limited. It is challenging to acquire phase-locking at startup and phase-relocking when mode-hopping of OEO occurs. Here, by using an automatic frequency calibration (AFC) assisted PLL, we attain a highly stable 10 GHz phase-locked OEO with robust phase-locking at startup and phase-relocking when mode-hopping of OEO occurs, for the first time. With the use of a fast digitally-controlled frequency shifter and a real-time frequency error detection unit in the AFC loop, the phase-locking and phase-relocking time are below 120 ms. Furthermore, it shows the phase noise of -135 dBc/Hz at 10 kHz offset, side-mode suppression ratio (SMSR) of 128 dBc, and Allan deviation of 4.8×10-11 at 5000 s for the phase-locked OEO. We thoroughly investigate the dynamics of the automatic frequency calibration, the phase-locking process, the phase-relocking after OEO mode-hopping, the system under vibration, and the frequency switching. Our approach is promising to generate a highly stable, low phase noise, and determinate frequency microwave signal, which can be used as a low phase noise reference for a microwave frequency synthesizer and high performance sampling clock for a data conversion system.

Low Phase Noise 20 Ghz Microwave Frequency Divider Based On A Super-Harmonic Injection Locked Optoelectronic Oscillator

Microwave Frequency Divider with Variable Dividing Ratio Based on a Tunable Optoelectronic Oscillator

19.1 GHz 18 Mw Divide-by-3 Heterodyne Injection Locking Frequency Divider in 0.18 Μm CMOS Technology

6.2 GHz 0.5 Mw Two‐dimensional Oscillator Array‐based Injection‐locked Frequency Divider in 0.18 Μm CMOS

Injection-Locked Millimeter Wave Frequency Divider Utilizing Optoelectronic Oscillator Based Optical Frequency Comb

A 3 Mw 54.6 GHz Divide-by-3 Injection Locked Frequency Divider with Resistive Harmonic Enhancement

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

Frequency Multiplying Optoelectronic Oscillator Based on Nonlinearly-Coupled Double Loops.

A Wide Locking Range and Low Power V-band Frequency Divider in 90nm CMOS

A Novel Scheme of Microwave Generation Based on Heterodyne Phase Locking of an OEO

Microwave Photonic Multi-Mode Injection-Locked Frequency Divider With a Wide Operational Range Based on an Optoelectronic Oscillator

Highly Stable And Low Phase Noise 10 Ghz Rf Signal Generation Based On A Sub-Harmonic Injection Locked Optoelectronic Oscillator

Injection-locked Optoelectronic Oscillator with High Side-Mode Suppression Ratio and Low Phase Noise Based on Frequency-Conversion Delay Matching

An Ultra-Low Phase Noise and Spurs Injection Locked 10 GHz Dual-Loop Optoelectronic Oscillator

Finely Tunable Coupled Optoelectronic Oscillator Based on Injection Locking and Phase Locked Loop

Frequency Stability Optimization of an OEO Using Phase-Locked-loop and Self-Injection-locking

Low Phase Noise and Highly Stable Optoelectronic Oscillator by Using Frequency-Multiplying Phase Locked Loop

Fast automatic frequency calibration assisted phase-locked highly stable optoelectronic oscillator

Ultra-Low Phase Noise and Frequency Agile X-Band Frequency Synthesizer Based on a Phase Locked Optoelectronic Oscillator

High sensitivity microwave phase noise analyzer based on a phase locked optoelectronic oscillator.

Close-to-carrier Phase Noise Suppression in Optoelectronic Oscillator