Abstract:Background Digital image correlation (DIC) method is a non-interference and non-contact full-field optical measurement technology. DIC's measurement accuracy is largely determined by the image acquisition system and the quality of the speckle pattern. Objective Although the optimal speckle pattern has been designed theoretically, the optimization process does not consider the influence of the imaging system. Furthermore, the optimal aperture has not been yield. The objective of this paper is to improve the measurement accuracy through optimization of aperture and speckle pattern. Methods In this paper, speckle images with different apertures and different speckle generation parameters were captured, and the corresponding measurement errors were evaluated. Results (1) The influence of aperture and the optimization of speckle are independent of each other. The optimal speckle generation parameters (speckle size and density) are determined experimentally, which turn out to be consistent with existing theoretical models. (2) The optimal aperture is 5.6, because excessively large F-number causes the loss of high-frequency information and excessively small F-number leads to significant lens aberrations, both of which will reduce the measurement accuracy. Conclusions The optimal aperture and speckle generation parameters (speckle diameter and density) are found and proved to be uncorrelated through actual experiments in practical conditions. These results provide experimental basis for the selection of parameters in actual engineering applications.

Curved Surface Fitting Method of Sub-Pixel Small Angle Measurement

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Phase fitting method for sub-pixel displacement measurements using digital speckle images

Digital Speckle Marginal Correlation Measuring Method

Errors Caused by Misalignment of the Optical Camera Axis and the Object Surface in the DSCM

Application of iteration and finite element smoothing technique for displacement and strain measurement of digital speckle correlation

Accurate displacement measurement via a self-adaptive digital image correlation method based on a weighted ZNSSD criterion

Study of the performance of different subpixel image correlation methods in 3D digital image correlation.

A digital speckle stereo matching algorithm based on epipolar line correction

Digital Speckle Displacement Measurement by Fuzzy Logic Correlation

Optimal Aperture and Digital Speckle Optimization in Digital Image Correlation

A self-adaptive sampling digital image correlation algorithm for accurate displacement measurement

Measurement of Structural Vibration Displacement and Frequency by Using Digital Speckle Correlation Method

Dynamic Deformation Measurement Of Specular Surface With Deflectometry And Speckle Digital Image Correlation

Measurement on a parabolic surface by quantitative shadow method in computer-controlled optical surfacing

Improved speckle projection profilometry for out-of-plane shape measurement.

Digital speckle correlation method with compensation technique for strain field measurements

Digital Speckle Displacement Measurement By A Thresholding Technique

BRIEF INTRODUCTION OF DIGITAL SPECKLE CORRELATION METHOD FOR NON-CONTACT STRAIN MEASUREMENT

Astigmatism-Based Displacement Sensing for Curved Optical Surfaces

Digital Image Correlation with Gray Gradient Constraints: Application to Spatially Variant Speckle Images