Abstract:Square wave alternating current (AC) tungsten inert gas (TIG) welding possesses great advantages in welding stability, quality, flexibility, and cost in manufacturing thin-walled propellant storage tanks with 2219-T6 aluminum alloy. To solve the welding engineering problem of 4 mm-thick plates made by square wave AC TIG welding, we conducted process optimization experiments and performed common microstructure analysis and mechanical property testing. Tensile strength and microhardness reaching 63.8 and 83.1% of the base material appear in the optimal weld. The dendrite morphology, grain size, and eutectic content of all welds were compared and analyzed with optical microscopic observation, image segmentation, and grayscale statistics. The obtained quantitative results interpret the macroscopic properties of the optimal weld from a microscopic perspective. Shallow and uniform equiaxed dimples, evident tearing ridges, and second-phase particles were detected in the tensile fractures. Reticular, granular, and lath eutectic ( α (Al) + CuAl 2 ) were found in the interior and boundaries of dendritic solid solution ( α (Al)). Unexpectedly, the epitaxial growth of the columnar grains was inconspicuous or absent in all welds. Uniform and fine equiaxed grains occupy almost all welds of different process parameters, while the G/R ratio of these welds reaches 15-23 °C·s/mm^2, under which the equiaxed crystals should not have formed. We attributed the grain refinement in these welds to the secondary phase particles in base metal. They are broken into fragments during the multi-pass rolling process of plates, remain semi-dissolved under a fast cooling rate, and provide adequate heterogeneous nuclei for melt solidification. A further SEM and EDS test to base metal and secondary phase particles confirmed our findings and speculations. These results suggest that in the molten pool with sufficient heterogeneous nucleation, the mechanical blocking effect of heterogeneous nucleation may interfere with the thermodynamic effect of welding heat input and speed on grain structure.

A Study on the Metallurgical and Mechanical Properties of a GMAW-welded Al-Mg Alloy with Different Plate Thicknesses

Microstructural Characterization of 5083 Aluminum Alloy Thick Plates Welded with GMAW and Twin Wire GMAW Processes

High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

Relationship between the weld pool convection and metallurgical and mechanical properties in hybrid welding for butt joint of 10-mm-thick aluminum alloy plate

Study on Morphology, Microstructure and Properties of 6063-T6 Aluminum Alloy Joints in MIG Welding

Microstructure and Mechanical Properties of Heat Affected Zone in Multi-Pass GMA Welded Al–Zn–Mg–Cu Alloy

Microstructure and Impact Mechanical Properties of Multi-Layer and Multi-Pass TIG Welded Joints of Al−Zn−Mg Alloy Plates

Microstructure and Mechanical Properties of Multi-Pass TIG Welded Joint of Thick Al–Zn–Mg Alloy Plate

Effect of Multiple Thermal Cycles on Metallurgical and Mechanical Properties During Multi-Pass Gas Metal Arc Welding of Al 5083 Alloy

Microstructure and mechanical properties of HSLA thick plates welded by novel double-sided gas metal arc welding

Research on Microstructure and Mechanical Properties of Square Wave Alternating Current Tungsten Inert Gas Welded Joints in 2219-T6 Aluminum Alloy

Effects of Welding Layer Arrangement on Microstructure and Mechanical Properties of Gas Metal Arc Welded 5083/6005A Aluminium Alloy Butt Joints

Mechanical Properties of Aluminum 5083 Alloy GMA Welds with Different Magnesium and Manganese Content of Filler Wires

Comparative in Mechanical Behavior of 6061 Aluminum Alloy Welded by Pulsed GMAW with Different Filler Metals and Heat Treatments

Microstructural and Mechanical Inhomogeneity in the Narrow-Gap Weld Seam of Thick GMA Welded Al–Zn–Mg Alloy Plates

Underlying Reasons of Poor Mechanical Performance of Thick Plate Aluminum-Copper Alloy Vacuum Electron Beam Welded Joints

Study on the Morphology, Microstructure, and Properties of 6082-T6 Aluminum Alloy Joints in MIG Welding

Microstructures and Mechanical Properties of Al–Zn–Mg Aluminium Alloy Samples Produced by Wire + Arc Additive Manufacturing

Effect of the Welding Direction on the Microstructural Characterization in Fiber Laser-Gmaw Hybrid Welding of 5083 Aluminum Alloy

Microstructure and mechanical properties of 2A12 aluminum alloy welded joint through CMT double side welding