Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Autonomous Underwater Vehicle Docking System Based on Wired Transmission

Docking to an Underwater Suspended Charging Station: Systematic Design and Experimental Tests

Underwater Docking System with Bidirectional Wireless Power Transmission Capability

Autonomous underwater vehicle docking system for cabled ocean observatory network

A Non-Contact Docking System for Charging and Recovering Autonomous Underwater Vehicle

Improving Steady and Starting Characteristics of Wireless Charging for an AUV Docking System

Development of an AUV “Xuanwu-1” with Docking Function

Design of Bidirectional Power Converters Coupled with Coils for Wireless Charging of AUV Docking Systems

Development and Test of a Subsea Docking System Applied to an Autonomous Underwater Helicopter

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Terminal Underwater Docking of an Autonomous Underwater Vehicle Using One Camera and One Light

Design of an ICPT system for battery charging applied to underwater docking systems

Research on AUV terminal electromagnetic positioning system based on two coils

Light Beacon-Aided AUV Electromagnetic Localization for Landing on a Planar Docking Station

Auv Terminal Docking Experiments Based on Vision Guidance

A Long-Term Cruise Monitoring System for Marine Ranching Based on Surface Docking Station

A Multi-Stage Visual Positioning Method for Autonomous Underwater Docking

AUV Docking Based on USBL Navigation and Vision Guidance

An Underwater Inductively Coupled Power Transfer System with a Ring-Shaped Coupler for ROV Charging.

Fundamental Analysis of Underwater Wireless Power Transfer Based on Ball-Joint Connector

Design and Implementation of a Uniform Power and Stable Efficiency Wireless Charging System for Autonomous Underwater Vehicles