Abstract:This paper presents a fibre-beam-element based model to capture the progressive collapsemechanisms of reinforced concrete (RC) frames. The model is comprised of rectangular and T-section fibre-beam elements. A stress-strain relationship for the steel which considers the embedment of the reinforcing bars in the concrete, the effect of concrete confinement and the bond-slip between the concrete and reinforcements are also considered in the model. The accuracy of the model is verified against experimental tests performed on two asymmetric one-story beam-column specimens with flange slabs under different lateral restraints. The first specimen, referred to as "OP", was a two-bay frame subjected to a penultimate column removal scenario, while the other one, referred to as "OA", was a three-bay frame with an antepenult removal scenario. The simulation results agree well with the experimental results with prediction of the peak capacity being within 10%. The model is then used to gain an in-depth understanding of the failure mechanisms of the two tested specimens. Numerical results reveal that the progressive collapse resistance of the RC frames is primarily determined by the bending stiffness and capacity of the columns. Compared to OP, the extra bay in OA provided a larger horizontal restraint to the damaged beam-flange slab, leading to 115% and 650% larger axial forces at the peak resistances under the stages of compressive arch action (CAA) and catenary action (CA), respectively. Furthermore, the penultimate column in OA was found to damage prior to its edge column, owing to its close proximity to the missing column and the additional bending moment MF generated by the redistributed axial forces to the columns.

Seismic Collapse Analysis of High‐rise Reinforced Concrete Frames under Long‐period Ground Motions

Collapse tests of RC frame with sudden middle column removal

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Cumulative Component Damages on Collapse Capacity of Ductile Steel and CFT Moment Resisting Frames under Over-design Ground Motions

Collapse Analysis of High-Rise Steel Moment Frames Incorporating Deterioration Effects of Column Axial Force – Bending Moment Interaction

Earthquake-Induced Failure Analysis of High-Rise Steel Buildings under Sequential Long-Duration Ground Motions

Modeling on Collapse Behaviour of High-Rise Concrete-Filled Steel Composite Frames under Over-Design Seismic Excitations

Permanent Damages of Structural Components in Existing High-Rise Steel Buildings Subjected to Rare Earthquakes

Collapse simulation of reinforced concrete high-rise building induced by extreme earthquakes

Numerical simulation on seismic collapse of thin-walled steel moment frames considering post local buckling behavior

Collapse Simulation of RC High-Rise Building Induced by Extreme Earthquakes

Structural Analysis of High-Rise Reinforced Concrete Building Structures During Construction

Numerical Investigation of Progressive Collapse Resistance of Reinforced Concrete Frames Subject to Column Removals from Different Stories

Thin-Walled Cfst Columns for Enhancing Seismic Collapse Performance of High-Rise Steel Frames

Lessons from the Collapse of Typical RC Frames in Xuankou School During the Great Wenchuan Earthquake

Quantitative investigation on collapse margin of steel high-rise buildings subjected to extremely severe earthquakes

Effects of Seismic and Progressive Collapse Designs on the Vulnerability of RC Frame Structures

Numerical Modelling of the Progressive Collapse of Reinforced Concrete Frames with Different Lateral Restraints

SEISMIC DAMAGE ASSESSMENT OF HIGH-RISE RC STRUCTURES BASED ON MATERIAL DAMAGE MODEL

Collapse Simulation of Reinforced Concrete Moment Frames Considering Impact Actions among Blocks