Abstract:Due to the coupling of rocket based combined cycle(RBCC) engine performance with flight vehicles,the design and the development of RBCC engines should be done for different flight trajectory.Based on the equations of dynamics and kinematics,the constant dynamic path design methodology of boost trajectory for vehicles powered by RBCC engines was studied and the altitude-step walking method was established.The simulation of the trajectory of the first stage flight vehicle powered by RBCC engine in a Two-Stage-To-Orbit(TSTO) hypersonic space transportation for Ma=0~8 was made by the program designed in C++ language.According to the baseline trajectory,with the coupling optimization strategy of Genetic Algorithm/ Sequential Quadratic Programming,a propellant flowrate control history that minimizes the propellant consumption for the non constant dynamic pressure flight path was calculated.The results show that considering the coupling between RBCC engines and flight path,the computation model can be used for the RBCC boost trajectory design and analysis;The whole boost process can consume as high as 55% takeoff mass propellant,in which the mass ratio of non-constant-dynamic-pressure segment to constant-dynamic-pressure segment is 2.3;Through optimization,the efficiency of propellant consumption can be enhanced by 3.5%;In ejector mode(Ma=0~2.5),the optimum mass flowrate regulative ratio of primary rockets is 4.3.The mass flowrate of primary rockets should be throttled when RBCC engines transit from inject to ramjet mode operation and the minimum mass flowrate is needed during the mode transition process.

Transfer Path Analysis of Rocket Engine Based on Weighted Tikhonov Regularization

Tikhonov Regularization-Based Operational Transfer Path Analysis

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

Bayesian identification of dynamic loads in the rocket engine

Dynamic Load Estimation of Launch Vehicles Accounting for Uncertainties of Modeling

An accurate and reliable operational transfer path analysis for transfer path contribution evaluation based on landweber iterative method

Study on identification method for parameter uncertain model of aero gas turbine

Finite-Element Collocation Based Successive Convexification for Powered Landing Guidance of Reusable Rockets

Study on Identification Method for Parameter Uncertainty Model of Aero Engine

Rocket Roll Dynamics and Disturbance — Minimal Modelling and System Identification

Transfer Matrix Method for the Determination of the Natural Vibration Characteristics of Realistic Thrusting Launch Vehicle—Part I

Robust Sensor Optimization for Liquid Propellant Rocket Engine Model Parameter Estimation

Trajectory reconstruction algorithm for powered landing of reusable rocket

Super-Twisting Fast Sliding Mode Guidance for Rocket Powered Landing

An Accurate Identification Method Based on Double Weighting for Inertial Parameters of Robot Payloads.

AN AUTOMATIC IDENTIFICATION METHOD FOR LONGITUDINAL MODES OF STRUCTURAL SYSTEM OF ROCKET

Force Identification Based on a Comprehensive Approach Combining Taylor Formula and Acceleration Transmissibility

The transfer path analysis method on the use of artificial excitation: Numerical and experimental studies

Minimal Modelling Approach to Describe Turbulent Rocket Roll Dynamics in A Vertical Wind Tunnel

RBCC Constant Dynamic Pressure Booster Trajectory Design and Propellant Mass Flowrate Analysis for TSTO Transportation System

Minimal modeling of rocket roll response and aerodynamic disturbance in wind tunnel.