Abstract:The trade-off between the safety and effectiveness of NiTi wire in practical applications has consistently hindered its advancement. This underscores the significance of adjusting its microstructure via appropriate heat-treatment techniques. This study systematically investigates the evolution of the constitution phases of the matrix and the grain size as the aging time increases from three minutes to three hours at 550 °C for Ni50.9Ti49.1 wire, and highlights the significant role of the R phase in static/cyclic tensile failure behavior. When aged for thirty minutes, the matrix consists mainly of the B2 phase, similar to the as-received wire, while it tends to transform into the R phase during loading (intermediate-R phase). In contrast, aging for three hours leads to the formation of the R phase as the matrix phase (matrix-R phase). The two types of R phase are discussed and compared in detail with regard to their contribution to the static/cyclic tensile failure behaviour. The longest fatigue life was obtained in wires with the R phase as the matrix phase, which was due to the combined effect: (i) the rapid attainment of a stable state so as to minimise the extent of phase transformation; (ii) coordination deformation of twin and dislocation to alleviate stress concentration; (iii) and the strong bonding between Ti2Ni and the matrix that reduces the occurrence of the "stretching into the hole-coalescence-microcrack process". The enhanced flexibility observed in the wire with matrix-R phase is due to its reduced elastic modulus and lower transformation plateau. The increase in plasticity is linked to changes in the wire's fracture behavior resulting from grain growth. Such microstructural changes allow the alloy wire to exhibit a more uniform plastic deformation under stress, which in turn postpones the onset of significant fracturing.

The Effects of Heat-Treatment and Braiding Parameters on the Flexural Fatigue Property of Ni-Ti Braided Cables for an Implantable Lead

Effect of Heat Treatment on Fatigue Behaviour of Biomedical Ni–Ti Alloy Wires under Ultrasonic Conditions

Tension and fatigue behavior of 316LVM 1x7 multi-strand cables used as implantable electrodes

A Mechanical Analysis Informed Fractography Study on Load-Specific Fatigue Behaviors of Pt-Ir Coils Used in Implantable Medical Leads.

Research on parameterized modeling and mechanical characteristics of shearer cables

Cyclic and uniaxial tensile properties of superelastic NiTi shape memory alloy cables

Experimental and computational study of the NiTi thin wires mechanical behavior

Enhanced Fatigue Resistance of Nanocrystalline Ni50.8Ti49.2 Wires by Mechanical Training

Experimental investigation of mechanical properties of NiTi superelastic shape memory alloy cables

Bending fatigue life enhancement of NiTi alloy by pre-strain warm surface mechanical attrition treatment

Thermomechanical fatigue of post-weld heat treated NiTi shape memory alloy wires

High-performance Flexural Fatigue of Carbon Nanotube Yarns

Investigation of the Ageing-Induced R-phase and Its Impact on Static/cyclic Tensile Failure in Ni50.9Ti49.1 Wire

Comparative Study Of The Influence Of Textile Parameters On The Fatigue Behavior Of Woven Endovascular Prostheses With Pulsatile Flow And Pulsatile Pressure

An Experimental Study of Deep Brain Stimulation Lead Fracture: Possible Fatigue Mechanisms and Prevention Approach.

In-Vitro Investigation on the Tribological Properties of Nickel-Titanium (NiTi) Alloy Used in Braided Vascular Stents

Tailored pore canal characteristics and compressive deformation behavior of bionic porous NiTi shape memory alloy prepared by selective laser melting

Experimental Study of Superelasticity of Ni-Ti Shape Memory Alloy Wires

Experimental Investigation of the Loading Conditions Impact on the Thin NiTi Wire Resistance Change during Cyclic Stretching

Effect of Heat Treatment on Mechanical Properties of Nickel-Titanium Instruments

Effects of Postweld Heat Treatment on Interfacial Behavior and Mechanical Properties of Joints Welded with Cu/Ni-Cr Alloy