Abstract:While the use of a Zn interlayer has been demonstrated to reduce the temperature required for joining easily oxidized metal alloys in atmospheric environments, the effects of reactions between the titanium alloy work pieces and the Zn interlayer on the mechanical performance of the finished joints are poorly understood. The present work addresses this issue by evaluating the chemical compositions at the interfaces of pre-galvanized Ti6Al-4 V alloys joined at 420 ? in an atmospheric environment by ultrasonic-assisted brazing, and relating the observed compositions to the mechanical performances of the joints. The Ti-6Al-4 V alloy workpieces are first wetted by pure Zn using an ultrasonic assisted hot dip galvanizing (U-HDG). The obtained ultrasonic excitations are demonstrated to destroy the oxide film on the surfaces of the Ti-6Al-4 V workpieces and promote reactions between Ti and Zn at the interfaces. The plating of Zn on the workpiece surfaces is demonstrated to be realized by the formation of intermetallic compounds (IMCs) comprising a uniform TiZn3 layer in contact with the Ti-6Al-4 V surface, followed by a mixed TiZn3 + TiZn16 layer and a 1-Zn layer at the outer surface. Application of the ultrasonic-assisted brazing process is demonstrated to maintain uniform TiZn3 layers next to the Ti-6Al-4 V surfaces, while the concentration of the TiZn16 phase near the midpoint of the joints increases with increasing ultrasonic treatment time (UST) from 5 s to 20 s, and the corresponding concentration of the 1-Zn phase decreases. The results of mechanical testing demonstrate that the shear strength of the joint obtained with a TiZn3 layer thickness of 8-12 mu m and a UST of 10 s is 210 MPa, which is 3.55 times greater than that obtained for joints processed without pre-galvanization.

Interactions, Joining and Microstructure of Sn-Ti/ZrO2 System

Low Temperature Brazing Between Pre-Metallized ZrO2 Ceramics and Medical Pure Titanium Using AuSn20 Filler Metal

Interfacial microstructure and mechanical properties of ZTA/ZTA joints brazed with Ni-Ti filler metal

Interfacial Microstructure and Mechanical Properties of Ultrasonic-Assisted Brazing Joints Between Ti–6Al–4V and ZrO2

Microstructural Evolution and Mechanical Properties of Zrb2-Sic/Cu/Ti/Ti6al4v Brazing Joints

Interfacial Microstructure and Properties of TZM Alloy and ZrCp-W Composite Joints Brazed Using Ti-50Ni Filler

Microstructure and mechanical properties of ZrB2-SiC joints fabricated by a contact-reactive brazing technique with Ti and Ni interlayers

Low Temperature Brazing of Biomedical Titanium and Zirconia Metallized with Sn-Ti Metal Foil

Wettability and Joining of SiC by Sn-Ti: Microstructure and Mechanical Properties

Effect of brazing temperature on interfacial microstructure and mechanical property of Ti60/AgCu/ZrO2 joint

Effect of Ti Content on the Metallization Layer and Copper / Alumina Brazed Joint

Interfacial Microstructure and Properties of In-situ TiB Reinforced ZrB2-SiC Joints

Brazing ZrO2 ceramic to Ti-6Al-4V alloy using NiCrSiB amorphous filler foil: Interfacial microstructure and joint properties

Interfacial Microstructure and Mechanical Property of ZrC-SiC Ceramic and Ti6Al4V Joint Brazed with AgCuTi Alloy

Microstructure and mechanical properties of TC4 joints brazed with Ti–Zr–Cu–Sn amorphous filler alloy

Effects of TiZn3 and TiZn16 Components on the Microstructure and Mechanical Performance of Ti-6Al-4 V Alloy Joints Formed Via Ultrasonic Assisted Brazing Using Pre-Galvanized Workpieces.

Interfacial Microstructure and Mechanical Properties of TZM Alloy Joints Vacuum Brazed Using Ti-Zr-Ni-Cu Filler Metal

Microstructure Evolution and Bonding Mechanism of ZrO2 Ceramic and Ti-6Al-4V Alloy Joints Brazed by Bi2O3-B2O3-ZnO Glass Paste

Interfacial microstructure and properties of Ti53311S titanium alloy joints brazed using TiZrNiCu filler metal

Evaluation of Corrosion-Resistant TA9/ZrO2 Joint Brazed with AuSn20 and Sn6Zr Fillers: Interfacial Evolution and Mechanical Properties

Interfacial microstructure and mechanical property of ZrC-SiC ceramic and TiAl joint brazed with AgZr active filler metal