Abstract:Current sensors based on the fluxgate magnetic field meter and feedback zero-field operating principle have excellent current measurement accuracy and linearity in a large range of up to thousands of amperes. An excitation current (${I}_{e}$ ) is employed in a magnetic fluxgate sensor to magnetize the magnetic core periodically, which will generate magnetization distortion that affects the performance of the sensor. This article proposes a novel scheme for suppressing the magnetization distortion through electrical compensation. The source of the magnetization distortion is theoretically derived and analyzed. It is found that the magnetization distortion is a function of the excitation current ${I}_{e}$ and is not affected by the primary current. Since ${I}_{e}$ is a periodical current that is determined by the parameters of the sensor itself, it is feasible to inject a specified periodical current to the output port of the sensor to cancel the magnetization distortion. Compared with the magnetization distortion compensation method with an additional core and coil, this method does not need to pair the cores or coils, which significantly reduces the complexity of the production process and saves space for the sensor. A prototype sensor with electrical compensation is designed, fabricated, and tested. Experimental results show that the compensation setting significantly suppresses the magnetization distortion signal. The amplitude of the basic frequency component is reduced from 24 to $6.8 ~\mu \text{V}$ . The other odd harmonics of the magnetization distortion are also reduced. The electrical compensation method works properly in a large current range from −1.5 to 1.5 kA. The scale accuracy of the prototype sensor is less than 5.7 ppm (parts per million). The compensation method can suppress the magnetization distortion to a similar level with operating temperature changes from room temperature to 50 °C.

Excitation Circuit Design and Theoretical Model for Self-Oscillating Fluxgate Current Sensors Considering Mutual Inductance Effect

Closed-Double-Magnetic Circuit for A Long-Stroke Horizontal Electromagnetic Vibration Exciter

Theory and Experiment of Observer Based Magnetostrictive Self-Sensing Actuator

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

An Accurate Discrete Current Controller for High-Speed PMSMs/Gs in Flywheel Applications

Study of Nonlinear Excitation Circuits for Fluxgate Magnetometer

Design and Hardware Experiment of Concentrating Magnetic Ring of Current Sensors Used in Open-Loop Fluxgate

Modeling and Performances of the Orthogonal Fluxgate Sensor Operated in Fundamental Mode

Analytical Model of Fluxgate System

Computer Simulation Of Micro-Fluxgate Sensors

Transient Response Analysis of Fluxgate Magnetometer through Maxwell and Simplorer

A method to reduce excitation circuit noise of fluxgate sensor

Electrical Compensation for Magnetization Distortion of Magnetic Fluxgate Current Sensor

A Distributed Current Source Model for Analyzing Motion-Induced Eddy-Current in a Conductor with Arbitrary Movements

A magnetic-mechanical strong coupling FEM model and vibration characteristic analysis of transformer core under DC bias

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Design, Simulation and Fabrication of Non-Spiral Based Fluxgate Sensor on Printed Circuit Board (Pcb)

Research on Small-Size Closed-Loop Fluxgate Transducer for Current Sensor Applications

Design of Fluxgate Current Sensor Based on Magnetization Residence Times and Neural Networks

Excitation Structure Design and Magnetic Field Analysis of a New Electromagnetic Flowmeter Based on Magnetically Permeable Material

Analytical Model of Magnetic Field Generated by Racetrack Superconducting Excitation Winding Within Cylindrical Ferromagnetic Boundary Based on Mirror Method