Abstract:Oil spills have become a major source of environmental pollution in Nigeria, especially in the oil-producing communities. Assessment of hydrocarbon contamination within the subsurface is a complex program and requires both field-based measurement and geochemical analysis, to give a precise definition of the extent of pollution. To ascertain the extent of contamination of the subsurface around an oil spill site which was reportedly contaminated by oil pollution, an integrated geophysical method involving 1D vertical electrical sounding (VES) and 2D, 3D electrical resistivity tomography (ERT) techniques supported with geochemical method was employed. Orthogonal set of 2D resistivity data consisting of six (6) parallel and six (6) perpendicular profiles were acquired in a 100 × 50-m2 rectangular grid using the Wenner array. Ten (10) vertical electrical soundings were also acquired in the site to supplement the 2D profiles. 2D resistivity data were processed individually using 2D Earth Imager software. The entire set of 2D resistivity data is collated into a 3D dataset using a 3D collation code and was inverted to produce a 3D resistivity structure of the subsurface, following from which contaminant plumes with high resistivity anomalies due to oil pollution were observed from 2D and 3D resistivity images. 2D resistivity tomography imaged contaminant plume to depth of 17.1 m, while 3D resistivity tomography imaged plumes of hydrocarbon contaminant to depth of 19.8 m within the subsurface. 3D depth slices imaged hydrocarbon contaminants within the third, fourth, and fifth layers at depths of 5.38-8.68 m, 8.68-12.5 m, and 12.5-16.9 m respectively. Thus, hydrocarbon contamination was evidently increasing with depth as observed in VES survey which indicated pollution to depth beyond 24 m, which goes beyond the depth to first and second aquifers in the area, indicating that the first and second aquifers have been invaded by oil pollution. Similarly, geochemical analysis of groundwater samples from three boreholes showed average concentration of total petroleum hydrocarbon (TPH) as 722.75µg/L which is higher than DPR limits indicating high contamination. Poly aromatic hydrocarbons (PAHs) concentration in the samples was summed up to 0.66µg/L in BH1, 0.68µg/L in BH2, and 0.30µg/L in BH3, which are above the DPR target limit. BTEX compounds also showed elevated concentrations in the water samples. These findings validate the result of geophysical investigation; therefore, future research should aim to proffer remediation solutions to oil spill impact on the environment within the study area. The findings of this study can help for better understanding of the subject of electrical resistivity inversion, and particularly on 3D inversion technique for delineating subsurface plumes of hydrocarbon contamination.

Integrated Assessment of Oil Leaking Accident Site with Long-Term Artificial Interference

Prediction of Groundwater Contamination with a Coupled Model in Coastal Areas: A Case Study of Benzene Leaching Accident

Status of Microbial Remediation Technology in Petroleum Contaminated Land

Assessment of the infiltration of water-in-oil emulsion into soil after spill incidents

Combining Multi-Source Data to Evaluate the Leakage Pollution and Remediation Effects of Landfill

Risk assessment and natural attenuation study of groundwater contamination in an oil reservoir in Fuxin

In Situ Experimental Research on Natural Attenuation of Oil Pollutants in a Gas Station

Modelling and assessment of accidental oil release from damaged subsea pipelines

ORGANIC GEOCHEMICAL CHARACTERIZATION OF THE SOURCE AND THE WEATHERING OF SPILLED OIL

Risk assessment of groundwater environmental contamination: a case study of a karst site for the construction of a fossil power plant

Compound-Specific Stable Carbon Isotopic Composition Of Petroleum Hydrocarbons As A Tool For Tracing The Source Of Oil Spills

Study on diesel vertical migration characteristics and mechanism in water-bearing sand stratum using an automated resistivity monitoring system

Characterizing Multi-Source Heavy Metal Contaminated Sites at the Hun River Basin: an Integrated Deep Learning and Data Assimilation Approach

Spatial infiltration and redistribution of light crude oil in heterogeneous water-bearing soil layers under different hydrogeological processes

Dynamic monitoring of leaking oil diffusion in porous media: An improved method assisting buried oil pipeline condition assessment

LNAPL recovery model as a tool for detecting live oil leaks into the groundwater in a complicated site

Integrated geophysical and geochemical methods for environmental assessment of subsurface hydrocarbon contamination

Numerical Study of Leakage and Diffusion of Underwater Oil Spill by Using Volume-of-Fluid (VOF) Technique and Remediation Strategies for Clean-Up

Vertical Transportation Diversity of Petroleum Pollutants under Groundwater Fluctuations and the Instructions for Remediation Strategy

Automated identification of the unknown contaminant source in groundwater at a leaking underground storage tank site

Numerical simulation and experimental study of three-phase distribution characteristics of leaked light non-aqueous phase liquid from buried pipelines in soils containing groundwater and gas