Abstract:The increasing amount of petroleum products has increased the risk of the pollution accidents, which could pose an acute threat to ecological safety. The leakage accidents often have the characteristics of suddenness, contingency and large pollution. The traditional chemical sampling detection method is not suitable for on-site emergency monitoring and quantitative warning. The development of satellite remote sensing and airborne imaging technology provides effective methods for the detection of accidents. However, the color characteristics of the floating transparent oil product are not obvious, and it seriously affects the imaging monitoring effect and poses a great threat to ecological security. According to the difference of the spectral reflectance characteristics of the water surface and the oil product, selecting a suitable operating band to improve the imaging effect is a common method for oil spill monitoring. For the spectral measurement of floating oil products, the existing researches were often carried out in the experimental containers, which have different optical characteristics in natural water. It is difficult to provide corresponding data support for the monitoring of on-site leakage accidents. In order to simulate the actual leakage scene, UV-Visible spectroscopic characteristics of transparent oils such as gasoline and xylene were investigated on the surface of artificial lake in this paper. Spectral measurement results show that the spectral angle cosine of the sample and water in each band interval is close to 1, but the spectral reflectance difference is significantly larger than the other band in the ultraviolet band, indicating the spectral characteristics of transparent oil were similar to the lake water in shape, but there is the largest difference in amplitude in the ultraviolet wavelength. To further demonstrate the results of spectral feature analysis, four ultraviolet-visible band filters of 365, 436, 546 and 700 nm were selected for imaging verification. The results show that the difference between the spectral reflectance curve of transparent oils such as floating gasoline and xylene and the amplitude of lake water is the largest at the ultraviolet wavelength, and the overall grayscale contrast of the two floating transparent oils and lake water at the ultraviolet wavelength is made. The difference between value and texture features is significantly higher than that in other visible wavelengths. Therefore, the use of the ultraviolet wavelength for imaging monitoring of floating oil products can effectively improve the imaging contrast between oil and natural water surface. The experiments were carried out under the conditions of natural light and natural water on the lake surface, which greatly simulated the actual transparent oil spill pollution scenarios and provided the most representative theoretical and data support for transparent oil imaging band optimization for airborne remote sensing monitoring.

ORGANIC GEOCHEMICAL CHARACTERIZATION OF THE SOURCE AND THE WEATHERING OF SPILLED OIL

Compound-Specific Stable Carbon Isotopic Composition Of Petroleum Hydrocarbons As A Tool For Tracing The Source Of Oil Spills

Research on UV Reflective Spectrum of Floating Transparent Oil

Effect of Short-Time Weathering on Spilled Oil Composition

Combining Molecular Fingerprints with Multidimensional Scaling Analyses to Identify the Source of Spilled Oil from Highly Similar Suspected Oils.

Comparative Study of Geochemistry and Multivariate Data Analysis on Mixed Oils Accumulated in Ordovician Reservoir in Tahe Oilfield,Tarim Basin, NW China

Ultramicroscopic organic petrology and potential of hydrocarbon generation and expulsion of quality marine source rocks in South China

Geochemical Characteristics and Source Rock Age Identification of Crude Oils in the Qaidam Basin, Northwest China

Evaluation of the diagnostic ratios of adamantanes for identifying seriously weathered spilled oils from simulated experiment and actual oil spills

Source and composition analysis of petroleum hydrocarbons in the refinery circulating water

The Change of Crude Oil Components in Different Production Stages

Characterization analysis and identification of common marine oil spill types using hyperspectral remote sensing

Environmental Petroleomics – application of ultrahigh-resolution mass spectrometry for molecular-level understanding of the fate of spilled oils

Experimental Study on the Synergistic Effect between Evaporation Weathering and Emulsification of Oil Spills

The error source analysis of oil spill transport modeling: a case study

Pollution Sources and Identification of Hydrocarbons in Soil and Sediment Using Molecular Markers

Advances in Research of Using Trace Elements of Crude Oil in Oil-Source Correlation

Progress in Marine Oil Spill Optical Remote Sensing: Detected Targets, Spectral Response Characteristics, and Theories

Research on transport and weathering of oil spills in Jiaozhou Bight, China

Analysis of Offshore Oil Spill Pollution Treatment Technology

Assessment of the infiltration of water-in-oil emulsion into soil after spill incidents