Abstract:A broad spectral response is highly desirable for radiation detection in modern optoelectronics; however, it still remains a great challenge. Herein, we report a novel ultrabroadband photodetector based on a high-quality tin monoselenide (SnSe) thin film, which is even capable of detecting photons with energies far below its optical band gap. The wafer-size SnSe ultrathin films are epitaxially grown on sodium chloride via the 45° in-plane rotation by employing a sputtering method. The photodetector delivers sensitive detection to ultraviolet–visible–near infrared (UV–Vis–NIR) lights in the photoconductive mode and shows an anomalous response to long-wavelength infrared at room temperature. Under the mid-infrared light of 10.6 μm, the fabricated photodetector exhibits a large photoresponsivity of 0.16 A W–1 with a fast response rate, which is ∼3 orders of magnitude higher than other results. The thermally induced carriers from the photobolometric effect are responsible for the sub-bandgap response. This mechanism is confirmed by a temperature coefficient of resistance of −2.3 to 4.4% K–1 in the film, which is comparable to that of the commercial bolometric detectors. Additionally, the flexible device transferred onto polymer templates further displays high mechanical durability and stability over 200 bending cycles, indicating great potential toward developing wearable optoelectronic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09561?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09561</a>.Digital image of the scalable sputtering growth process of the SnSe film on the NaCl substrate; faced-center cubic crystal structure of NaCl; top-view SnSe crystal structure with a distorted rock-salt structure; XRD in-plane Phi scans for SnSe(001) and NaCl(011) planes; photograph images of the exfoliated SnSe ultrathin film with different thicknesses after transferred onto the PET templates; I–V curves under dark and laser illumination with different powers; Rising/falling time as a function of laser powers; I–V curves under the dark and 850 nm laser illumination with different powers; dynamic response curve under the illumination of 0.23 mW; dynamic response curves of the device under 1550 nm laser illumination with different powers; photocurrent as a function of laser powers; I–V curves under the dark and 1550 nm laser illumination with different powers; and noise spectrum of the SnSe photodetector as a function of frequency measured at a constant bias voltage of 20.0 V (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09561/suppl_file/am0c09561_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Micron-Scale Photodetectors Based on One-DimensionalSingle-Crystalline Sb 2– x Sn x Se 3 Microrods: SimultaneouslyImproving Responsivity and Extending Spectral Response Region

A high performance broadband photodetector based on (SnxSb1−x)2Se3 nanorods with enhanced electrical conductivity

Self-Powered Broadband Schottky Junction Photodetector Based on a Single Selenium Microrod

Ultrafast Broadband Photodetector Based on SnS Synthesized by Hydrothermal Method

Enhanced Visible to Near-Infrared Photodetectors Made from MoS2-based Mixed-Dimensional Structures

Facile synthesis of hybrid nanorods with the Sb2Se3/AgSbSe2 heterojunction structure for high performance photodetectors.

High-performance photodetectors based on two-dimensional tin(II) sulfide (SnS) nanoflakes

Flexible SnSe Photodetectors with Ultrabroad Spectral Response up to 10.6 μm Enabled by Photobolometric Effect

Wafer‐Scale Fabrication of Broadband Sb2Se3 Photodetectors and their Multifunctional Optoelectronic Applications

Field Effect Transistor Photodetector Based on Two Dimensional SnSe2

Chemical Vapor Deposition Growth of High Crystallinity Sb 2 Se 3 Nanowire with Strong Anisotropy for Near-Infrared Photodetectors.

Solution Synthesis of Ultrathin Single-Crystalline SnS Nanoribbons for Photodetectors Via Phase Transition and Surface Processing.

Photoelectronic Properties of Antimony Selenide Nanowire Synthesized by Hydrothermal Method

High-performance visible-to-near-infrared Sb2Se3 photodetectors with high-frequency rapid response

Facile Microwave-Assisted Synthesis of Uniform Sb2Se3nanowires for High Performance Photodetectors

Visible-to-near-infrared photodetectors based on SnS/SnSe 2 and SnSe/SnSe 2 p−n heterostructures with a fast response speed and high normalized detectivity

Mono-crystalline Ge1-xSnxSe micro-sheets with hexagonal morphologies for Visible-NIR photodetectors: Increased carrier concentration, narrowed band gap and improved performances

Single-Crystal Sb2S3 Tube Prepared by Chemical Vapor Deposition for a 1 Cm Photodetector Application

Visible-to-near-infrared Photodetectors Based on SnS/SnSe2 and SnSe/SnSe2 P?n Heterostructures with a Fast Response Speed and High Normalized Detectivity

Realization of P-Type In1.75Sb0.25Se3 Alloys for Short-Wave Infrared Photodetectors