Abstract:To improve the welding performance of aluminum alloys, a thermal source model of an irregular weld seam was established. COMSOL software was used for numerical simulation of the weld seam geometry effect on the temperature and stress fields in laser welding, which results were experimentally validated. The results show that the ellipsoidal laser welding melted micropool exhibited quasi-steady-state temperature field characteristics. The temperature gradient and thermal stress showed an increase followed by a decline. The temperature fluctuation amplitude of the square-tooth-shaped weld seam exceeded that of the arc-toothshaped one. The temperature evolution of the broken line tooth-shaped weld seam showed a slightly increasing trend, except for the inflection point. The experimental average tensile strength of the weld seam was the highest, reaching about 210 MPa, i.e., roughly 85% of the base material (245 MPa), which coincided with the COMSOL-based temperature field simulation results. With increasing deformation amplitude and transition radius, the maximum tensile force, tensile strength, and elongation at fracture showed an increasing trend. However, the deformation amplitude should be below a certain limit because its increase elongates the welding path and reduces the distance between weld seams, resulting in serious heat accumulation. The tensile fracture morphology of the 6063-T6 base material was curved shear, with shallow toughness pits, small tearing edges at the edges, and small granular objects, indicating small plastic deformation during the fracture process. The tensile fracture of the welded part spanned the weld seam and the base material, and the fracture occurred along the tangent direction of the weld seam. The fracture surface was smooth, the tearing edges at the edge of the toughness pit shifted along the weld seam direction, forming many co-directional slip bands, with highly pronounced plastic deformation.

3D Optical Measurement and Numerical Simulation of the Fracture Behavior of Al6061 Laser Welded Joints

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Welded Joints Fracture Behavior of Laser In-Situ Welding of High Volume Fraction SiCP/2024 Al MMC

Microstructural and Mechanical Characterization of Aluminum-Lithium Alloy 2060 Welded by Fiber Laser

Experimental investigations on mechanical properties of AA6061-T6 aluminum alloy joined by laser welding using digital image correlation

Laser Weld Seam Curved Path Effect on 6063 Aluminum Alloy Strength and Temperature Distributions: COMSOL Numerical Simulation

Microstructure evolution and fracture behavior of rotating laser welded-brazed 6061 aluminum alloys/304 SS dissimilar joint

In Situ SEM Observations of Fracture Behavior of Laser Welded–Brazed Al/Steel Dissimilar Joint

Tensile resistance, microstructures of intermetallic compounds, and fracture modes of welded steel/aluminum joints produced using laser lap welding

Tensile failure analysis of laser stake-welded T-joints: X-ray tomography based conformal finite element and fractal theoretical approaches

<p>Finite element simulation of tensile behavior of laser welded 5083 aluminum alloy joint with different filler wires</p>

Fracture Behavior of Heat Affected Zone of Laser-Welded Joint for Ti-6al-4v Titanium Alloy: Experimental and Computational Study

Microstructural, Porosity and Mechanical Properties of Lap Joint Laser Welding for 5182 and 6061 Dissimilar Aluminum Alloys under Different Place Configurations

Numerical simulation of the laser welding process in butt-joint specimens

Solidification microstructures and softening behavior of laser welded 6082-A356 aluminum alloy dissimilar butt joints

First principle calculations and mechanical properties of the intermetallic compounds in a laser welded steel/aluminum joint

First-principles and experimental investigations on ductility/brittleness of intermetallic compounds and joint properties in steel/aluminum laser welding

Local Zone-Wise Elastic-Plastic Constitutive Parameters of Laser-welded Aluminium Alloy 6061 Using Digital Image Correlation

In-situ Investigation on Mechanical Behavior of Laser-Welded Joint for TC4 Titanium Alloy

Mechanical Characterization and Prediction of Aluminum Alloy Laser Welding Joints Including Roles of Geometries and Porosity

Study on Solidification Cracking of Laser Dissimilar Welded Joints by Using In-Situ Observation and Numerical Simulation