Abstract:A triple-active bridge (TAB) can be used as a power conversion unit in a three-port DC energy router (DCER) such as a triple-active bridge-based DC energy router (TAB-DCER). The operational loss of a TAB can be seen as a key factor affecting the efficiency of a TAB-DCER. However, the RMS value of the inductor current of the TAB-DCER increases under single-phase shift (SPS) control, and this greatly increases the system operating losses. The use of phase-shifted plus PWM (PS-PWM) control can reduce the RMS value of the inductor current, but its mathematical model is complex, and involves difficult calculations. To address this problem, in the study reported here, we developed an optimal control strategy for the RMS value of the inductor current based on TAB-DCER. First, the working principle of a TAB-DCER under PS-PWM control was analyzed, and a circuit decomposition model was established. Second, the operating modes under PS-PWM control were analyzed, and corresponding expressions of port power and the RMS value of the inductor current were obtained. Third, an optimized mathematical model of the sum of squares of the RMS value of the inductor current of the TAB-DCER was constructed. Finally, a genetic algorithm was used to solve the mathematical model and derive the optimal phase shift angle; this resulted in a lower RMS value of the inductor current in the TAB-DCER and reduced the system operating losses. The simulation and experimental results show that the TAB-DCER used in the present study can reduce operating losses, improve system efficiency, and deliver coordinated power control.

An Improved Control Strategy for Triple-port Power Electronic Transformer under Unbalanced AC Loads Condition

A Novel Neutral Current Control Strategy for the Three-Phase Four-Wire Boost PFC Converter

Control Strategies of a Multiport Power Electronic Transformer (PET) for DC Distribution Applications

Efficiency Optimization Strategy of Three Port Triple Active Bridge DC-DC Converter

Energy Balance Control for Improving Transient Performance of DC Bus Voltage in Power Electronic Transformer for the Voltage-Sensitive Loads

Modeling and Control of a Multiport Power Electronic Transformer (PET) for Electric Traction Applications

A power electronic transformer (PET) with multiport bidirectional resonant DC-DC converters for electric traction applications

Improved Direct Power Control of a Wind Turbine Driven Doubly Fed Induction Generator During Transient Grid Voltage Unbalance

A Comprehensive Closed-Loop Voltage Ripple Control Scheme for Modular Multilevel Converter-Based Power Electronic Transformers

Improved Direct Power Control of a Grid-Connected Voltage Source Converter During Network Unbalance

Research on Power Electronic Transformer Based on Three-level Topology

Design and Implementation of Four-Port Megawatt-Level High-Frequency-Bus Based Power Electronic Transformer

An Effective Power Electronic Transformer Applied to Distribution System

Voltage source control strategy of three-port modular multilevel converter

Comprehensive Control Strategy and Robust Operation for Input Series Output Parallel Power Electronics Transformers in MVDC Grids

Power Electronic Transformer Using Multi-Pulse Rectification Technique

An Efficiency Improvement Strategy for Triple-Active-Bridge-Based DC Energy Routers in DC Microgrids

A Simple Power Estimation with Triple Phase-Shift Control for the Output Parallel DAB DC–DC Converters in Power Electronic Traction Transformer for Railway Locomotive Application

A Novel Three-Stage Power Electronic Transformer for AC/DC Conversion

Bidirectional-friendly rectifier control strategy for advanced traction power supply system under unbalanced supply

Power Management of AC/DC Hybrid Distribution Network With Multi-Port PET Considering Reliability of Power Supply System