Abstract:The integrated system with the strapdown inertial navigation system (SINS) and the global positioning system (GPS) is the most popular navigation mode. It has been used in many navigation fields. Before the integrated system works properly, it must determine the initial attitude for SINS. In SINS/GPS-integrated systems, the navigational velocity can be used to carry out the initial alignment when the system is installed in the in-motion vehicle. However, the initial velocity errors are not considered in the current popular in-motion alignment methods for SINS/GPS integration. It is well-known that the initial velocity errors must exist when the initial velocity is obtained from the GPS outputs. In this paper, an improved method was proposed to solve this problem. By analyzing the original observation vectors in the in-motion coarse alignment method, an average operation was used to construct the intermediate vectors, and the new observation vector can be calculated by subtracting the intermediate vector from the original observation vector. Then, the initial velocity errors can be eliminated from the newly constructed observation vector. Thus, the interferences of the initial velocity errors for the initial alignment process can be suppressed. The simulation and field tests are designed to verify the performance of the proposed method. The tests results showed that the proposed method can obtain the higher accurate results than the current methods when the initial velocity is considered. Additionally, the results of the proposed method were similar to the current methods when the initial velocity errors were not considered. This shows that the initial velocity errors were eliminated effectively by the proposed method, and the alignment accuracy were not decreased.

Method of Large Acceleration Change for In-Flight Alignment of Projectiles Based on Double-Vector Observations

A Fast Robust In-Motion Alignment Method for Laser Doppler Velocimeter-Aided Strapdown Inertial Navigation System

Velocity/Position Integration Formula (I): Application to In-flight Coarse Alignment

Fast Heading-Rotation-based High-Accuracy Misalignment Angle Estimation Method for INS and GNSS

An Improved In-Motion Coarse Alignment Method for SINS/GPS Integration with Initial Velocity Error Suppression

A Rapid Self-Alignment Strategy for a Launch Vehicle on an Offshore Launching Platform

Rapid in-motion heading alignment using time-differenced carrier phases from a single GNSS antenna and a low-grade IMU

A Novel Method for Fast Stationary Initial Alignment Based on Extended Measurement Information.

Initial Alignment on Moving Base Using GPS Measurements to Construct New Vectors

A Novel Robust Position Integration Optimization-Based Alignment Method for In-Flight Coarse Alignment

Anti-swaying Self-Alignment Method Based on Observation Vector Inertia for SINS under Latitude Uncertainty

An Alignment Method for Strapdown Inertial Navigation Systems Assisted by Doppler Radar on a Vehicle-Borne Moving Base

Research on the navigation method of large-scale differential tail-control improvised guided munitions based on rotational speed constraints

Practical Integrated Guidance and Control for the High-Speed Anti-Ship Missile to Counter Switching Targets Under a Short Time-to-go Condition

A Fast In-Motion Alignment Method for INS/DVL in Rough Sea Conditions

A Position Loci-Based In-Motion Initial Alignment Method for Low-Cost Attitude and Heading Reference System

An Improved Initial Alignment Method Based on SE2(3)/EKF for SINS/GNSS Integrated Navigation System with Large Misalignment Angles

Rapid Reduction Dimensionality Transfer Alignment Method Based on CKF for SINS of Ship-borne Aircraft with GNSS Assistance

An Improved In-Motion Alignment Method for SINS/GPS With the Sliding Windows Integration

Rapid Initial Heading Alignment Using Single-Antenna GNSS and a Low-Grade IMU

Rapid alignment method of INS with large initial azimuth error under uncertain flexure disturbances