Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Organic Electronics: Efficient and Air‐Stable Aqueous‐Processed Organic Solar Cells and Transistors: Impact of Water Addition on Processability and Thin‐Film Morphologies of Electroactive Materials (Adv. Energy Mater. 34/2018)

Efficient and Air-Stable Aqueous-Processed Organic Solar Cells and Transistors: Impact of Water Addition on Processability and Thin-Film Morphologies of Electroactive Materials

Ground-state Electron Transfer in All-Polymer Donor-Acceptor Blends Enables Aqueous Processing of Water-Insoluble Conjugated Polymers

Editorial: High-Performance Organic Thin-Film Transistors

Ground-state electron transfer in all-polymer donor:acceptor blends enables aqueous processing of water-insoluble conjugated polymers

Porous Organic Polymer Films with Tunable Work Functions and Selective Hole and Electron Flows for Energy Conversions

Recent Advances in Water/Alcohol‐Soluble Π‐conjugated Materials: New Materials and Growing Applications in Solar Cells

Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells.

Directly Patternable, Highly Conducting Polymers for Broad Applications in Organic Electronics

Efficient organic solar cells processed from hydrocarbon solvents

Advances in Water-Soluble Conjugated Polymers for Organic Electronics

High-efficiency Organic Solar Cells Processed from a Real Green Solvent

Ethanol-Processable Polyfuran Derivative for Eco-Friendly Fabrication of Organic Solar Cells Featuring Self-Healing Function

Enabling High Efficiency of Hydrocarbon‐Solvent Processed Organic Solar Cells through Balanced Charge Generation and Non‐Radiative Loss

Air‐Processed Efficient Organic Solar Cells from Aromatic Hydrocarbon Solvent without Solvent Additive or Post‐Treatment: Insights into Solvent Effect on Morphology

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

High-Efficiency Organic Solar Cells Processed from Real Green Solvent

Sustainable Solution Processing Toward High‐Efficiency Organic Solar Cells: A Comprehensive Review of Materials, Strategies, and Applications

Nonhalogenated Solvent Processable and Printable High-Performance Polymer Semiconductor Enabled by Isomeric Nonconjugated Flexible Linkers

Efficient organic solar cells enabled by sustainable and synergetic device engineering

High-efficiency Organic Solar Cells Processed from a Halogen-Free Solvent System