Abstract:Abstract Background Additively manufactured porous metallic structures have recently received great attention for bone implant applications. The morphological characteristics and mechanical behavior of 3D printed titanium alloy trabecular structure will affect the effects of artificial prosthesis replacement. However, the mechanical behavior of titanium alloy trabecular structure at present clinical usage still is lack of in-depth study from design to manufacture as well as from structure to mechanical function. Methods A unit cell of titanium alloy was designed to mimick trabecular structure. The controlled microarchitecture refers to a repeating array of unit-cells, composed of titanium alloy, which make up the scaffold structure. Five kinds of unit cell mimicking trabecular structure with different pore sizes and porosity were obtained by modifying the strut sizes of the cell and scaling the cell as a whole. The titanium alloy trabecular structure was fabricated by 3D printing based on Electron Beam Melting (EBM). The paper characterized the difference between the designs and fabrication of trabecular structures, as well as mechanical properties and the progressive collapse behavior and failure mechanism of the scaffold. Results The actual porosities of the EBM-produced bone trabeculae are lower than the designed, and the load capacity of a bearing is related to the porosity of the structure. The larger the porosity of the structure, the smaller the stiffness and the worse the load capacity is. The fracture interface of the trabecular structure under compression is at an angle of 45 o with respect to the compressive axis direction, which conforms to Tresca yield criterion. The trabeculae-mimicked unit cell is anisotropy. Under quasi-static loading, loading speed has no effect on mechanical performance of bone trabecular specimens. There is no difference of the mechanical performance at various orientations and sites in metallic workspace. The elastic modulus of the scaffold decreases by 96%–93% and strength reduction 96%–91%, compared with titanium alloy dense metals structure. The apparent elastic modulus of the unit-cell-repeated scaffold is 0.39–0.618 GPa, which is close to that of natural bone and stress shielding can be reduced. Conclusion We have systematically studied the structural design, fabrication and mechanical behavior of a 3D printed titanium alloy scaffold mimicking trabecula bone. This study will be benefit of the application of prostheses with proper structures and functions.

Mechanical Properties of Porous Titanium Alloy Scaffold Fabricated Using Additive Manufacturing Technology

Microstructure and Mechanical Properties of Additive Manufactured Porous Ti–33Nb–4Sn Scaffolds for Orthopaedic Applications

Preparation and mechanical performance analysis of porous Ti6Al4V scaffold fabricated by direct ink writing

Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing

Mechanical Properties of Porous Ti-6Al-4V Titanium Alloys Fabricated by Selective Laser Melting

Failure Analysis of an Additive Manufactured Porous Titanium Structure for Orthopedic Implant Applications

Investigating mechanical properties of 3D printed porous titanium scaffolds for bone tissue engineering

The Select of Internal Architecture for Porous Ti Alloy Scaffold: A Compromise Between Mechanical Properties and Permeability

Trabecular-like Ti-6Al-4V Scaffolds for Orthopedic: Fabrication by Selective Laser Melting and in Vitro Biocompatibility

Development of Porous Medical Implant Scaffolds Via Laser Additive Manufacturing

Micro-pore structure and mechanical properties of porous titanium scaffold using 3D print technology

Structural and Material Determinants Influencing the Behavior of Porous Ti and Its Alloys Made by Additive Manufacturing Techniques for Biomedical Applications

Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering

Properties of Additive-Manufactured Open Porous Titanium Structures for Patient-Specific Load-Bearing Implants

Effect of lattice type on biomechanical and osseointegration properties of 3D-printed porous Ti6Al4V scaffolds

Fabrication of Customized Ti6AI4V Heterogeneous Scaffolds with Selective Laser Melting: Optimization of the Architecture for Orthopedic Implant Applications.

Porous tantalum scaffolds: Fabrication, structure, properties, and orthopedic applications

Pore Structures and Mechanical Properties of Porous Titanium Scaffolds by Bidirectional Freeze Casting.

Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting

Structural Characteristics And Mechanical Behavior Of Selective Laser Sintered Porous Ti-6mo Alloy For Biomedical Applications

Mechanical behavior of a titanium alloy scaffold mimicking trabecular structure