Abstract:D-STATCOM,which is applied to compensate unbalance load in distribution electrical power system,has many advantages such as perfect dynamic characteristic,low total harmonics distortion and high power density,it can compensate balance and unbalance load real-timely on the spot.Consequently,based on the power circuit of the D-STATCOM with segregated phase compensation,after logical on-off function was defined as 1 or-1 firstly,the dynamic mathematic model with fourth-order of D-STATC OM was established in time domain,then was transformed to transfer function in frequency domain.Subsequently,based on the instantaneous power theory,command current detection method of unbalance load and direct current control mode were presented.The double closed-loop control system,which includes three phase current and the voltage of capacitor,was realized.Furthermore,the whole system of D-STATCOM was simulated using the mathematic model proposed in this paper and devices respectively in 380 V three-phase four-wire distribution power system.Simulation results show that the dynamic process was 0.01 s when the load changed from 100 kVA inductive load to-100 kVA capacitive load,and after compensation,the active power became smooth and the reactive power was around zero.In addition,the voltage of the capacitor was around 400 V but fluctuant due to the absorbability and release of power which was to keep the voltage of capacitor and to complete the compensation.It is concluded that the proposed mathematic model of D-STATCOM is correct,command current detection method of unbalance load and direct current control mode are valid,and D-STATCOM has good dynamic and static compensation performance in balance and unbalance distribution power system.

Modeling and Real-Time Simulation of Three-Level Fault-Tolerant STATCOM under Switch Open Circuit Faults

Fault-tolerant Design and Control of Modular Multilevel Converter-Based STATCOM

Real-time Digital Simulation of a ±50 Mvar Cascaded STATCOM

Real-Time Digital Simulation for a 50Mvar Cascaded Multilevel STATCOM

A Novel Method For Improving The Fault Tolerance Of Transformerless Cascade Pwm Statcom

Fast-transient repetitive controller based current control strategy for a cascaded DSTATCOM

STATCOM Based on Modularized Multilevel Converters

Fast Repetitive Controller Based Individual Phase Control Strategy for Cascaded DSTATCOM.

Analysis Of Hybrid Cascaded Multilevel Converter Based Statcom

Study on Mathematic Model and Model Simulation of the Three Phase Solid State Fault Current Limiter

LCC-HVDC System Dynamic Phasor Modeling Based on Improved Switch Function

DC-bus Voltage Control Strategy of DSTATCOM Using Modulation-Ratio-regulation for Start-Up Process

Dynamic Phasor Model of Line Commutated Converter Under Unbalanced Conditions

Modeling and Simulation of D-STATCOM for Unbalance Three-phase Distribution Power System

Real-time Simulation on Wind Power System Dynamics Incorporating STATCOM

Comprehensive simulation for faults in the stator windings of salient-pole synchronous generators

Control and Simulation of STATCOM Integrated Energy Storage System

Modeling, Simulation and Control Strategy of a Novel 10 Kv 15-Level M-STATCOM under SVG Condition

A Novel Fault-Tolerant Operation Approach for the Modular Multilevel Converter-Based STATCOM with the Enhanced Operation Capability

Optimal Control Strategy for Cascaded STATCOM under Unsymmetrical Power System Conditions

Testing of A Controller for an Eto-Based Statcom Through Controller Hardware-In-The-Loop Simulation