Abstract:In biodegradable stents made from dilute Mg-Zn-Ca alloys a small number of grains constitute the thickness of a sample limiting the mechanical constrain typically seen in polycrystalline alloys. At the same time such stents are exposed to complex loading conditions, which could potentially lead to premature failure particularly in the presence of limited slip mode activation. In order to improve our understanding of the prevailing micromechanics for such conditions hot-rolled, thin strip samples were produced with thickness to grain size ratios (t/D) of 100 and 17. Samples were extracted from such thin strips and subjected to interrupted cyclic four-point bending in order to study the in-grain misorientation axis (IGMA) evolution of selected grains during cyclic loading using quasi-in-situ electron back-scattered diffraction (EBSD). Grains were selected at the tensile and compressive faces of samples, and in the vicinity of the neutral band. Analysis of the evolution of IGMA and misorientation profiles during the bending showed that extension twinning was the dominant deformation mode in the compressive region for both t/D ratios. In addition, non-basal -type slip systems were active as a result of work hardening. In the tensile region, the activity of -type non-basal slip systems was observed for the t/D of 100, but basal/double basal slip was the dominant deformation mode for the t/D of 17. No signs of failure were observed for the sample with a t/D of 17 at the tensile region, implying that these basal slip modes can accommodate deformation largely without the assistance of other deformation modes. The neutral band evolution was mapped using grain orientation spread (GOS) analysis. In contrast to the continuum mechanics solution, a neutral band was observed instead of an axis. The position of the neutral band was dependant on the local orientation organization of the grains and the extent of work-hardening.

Detwinning-related Bauschinger Effect of an Extruded Magnesium Alloy AZ31B

Dynamic Strength Differential and Bauschinger Effects in an Extruded Az80 Magnesium Alloy

Effects of Detwinning on the Inelasticity of AZ31B Sheets During Cyclic Loading and Unloading

Effect of Slip on Detwinning Behavior During Multi-Direction Compression of A Wrought Magnesium Alloy

Numerical Study on the Effect of Pre-Strain on Detwinning in Rolled Mg Alloy AZ31

Bauschinger Effect in Gd Micro-Alloying Metastable High-Entropy Alloy

Research on deformation mechanism of AZ31 magnesium alloy during uniaxial compression

Mechanical and microstructural single-crystal Bauschinger effects: Observation of reversible plasticity in copper during bending

Molecular Dynamics Simulation of Bauschinger Effect in Cu Nanowire with Different Crystallographic Orientation

Detwinning of AZ31 magnesium alloy during in situ tension

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

Effects of Bimodal Basal Texture on Bending Stress and Microstructure Evolution of Mg-2.6Nd-0.55Zn-0.5Zr Alloys

The effect of strain rate asymmetry on the Bauschinger effect: A discrete dislocation plasticity analysis

Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy

Effect of Reversible Phase Transformation on Bauschinger Effect in Gd Micro-Alloying Metastable High-Entropy Alloy: Quasi In-Site Observation and Kinetic Explanation

Bauschinger effect in wear of Cu-40Zn alloy and its variations with the wear condition

In Situ Monitoring of Dislocation, Twinning, and Detwinning Modes in an Extruded Magnesium Alloy under Cyclic Loading Conditions

Study of Twin Behavior During Uniaxial Compression of Az31 Magnesium Alloy

Effect of Pre-Strain on Extension Twinning Behavior in an Extruded AZ31 Mg Alloy Observed by In-Situ EBSD

Quasi-in Situ Electron Backscatter Diffraction Analysis of Twinning–detwinning Behavior in AZ31 Magnesium- Alloy Rolled Plates Subjected to Compression Loading in Different Directions

Size effects and the deformation behaviour of a dilute Mg-Zn-Ca alloy subjected to cyclic four-point bending