Abstract:Purpose - The purpose is to present a sensorless control method by which high-resolution rotor position information is estimated and used for phase-advancing operation of a high-speed permanent magnet (PM) brushless DC (BLDC) motor.Design/methodology/approach - The proposed sensorless control approach uses hardware to observe the flux vector which is excited by rotor magnets. It can provide the rotor position which is the same as the phase angle of the observed flux vector.Findings - High-resolution rotor position signal of the BLDC motor for dynamic phase-advancing control cannot be directly obtained from the conventional Hall-effect sensors, or via the traditional back-EMF-based sensorless control strategies in which the back-EMF may be even undetectable at high-speed. The proposed rotor-flux-observer (RFO)-based sensorless control method overcomes these problems, and meanwhile provides high-resolution rotor position information for the phase-advancing purpose.Originality/value - The RFO-based sensorless control is traditionally applied to PM brushless ac (BLAC) operations, where the motor voltage vector can be calculated from the inverter switching status. However, this is not readily applicable to a BLDC motor since the voltage of the floating phase cannot be calculated. Moreover, during high-speed operation, the microprocessor may not be sufficiently fast to calculate the high-resolution rotor position. Therefore, in this paper, it is proposed to use hardware to observe the rotor-flux-vector. The microprocessor only samples the vector's alpha- and beta-components and calculates the phase angle, hence, its burden is low. The proposed method is validated with a 1.8 kW 85,000 rpm BLDC motor system.

A Full-speed Range Sensorless Control Scheme of Brushless DC Motor Based on Saliency Effects

SWITCHED RELUCTANCE MOTOR SENSORLESS DRIVE WITH ENERGY OPTIMIZING CONTROL STRATEGY

Analysis of Position Errors in High-Frequency Carrier Signal Injection Based Sensorless Control of PMSM

Design of Dual Mode Brushless DC Motor Controller Based on Position Sensor or Sensorless

Saliency Investigation of Switched-Flux Pm Brushless Ac Machine for Saliency-Tracking-Based Sensorless Control

Sensorless Operation of an Inset PM Bearingless Motor Implemented by the Combination Approach of MRAS and HF Signal Injection

Sensorless control and start-up strategy of permanent magnet synchronous motor

Comparative Performance Evaluation of Hall Effect Sensorless Control Options in Permanent Magnet Brushless DC Motor Drives

A New Start Control Strategy for Brushless DC Motor

Reasearch on Sensorless PM Brushless DC Motor Starting Control

A Position Sensorless Control Strategy for the BLDCM Based on a Flux-Linkage Function

COMPARATIVE INVESTIGATION OF SENSORLESS CONTROL WITH TWO HIGH-FREQUENCY SIGNAL INJECTION SCHEMES

Detection method of brushless DC motor rotor position in PWM_ON_PWM modulation

A Full-Speed Sensorless Control Algorithm For Interior Permanent Magnet Synchronous Motor Using Sliding-Mode Observer And Hf Signal Injection

INVESTIGATION OF ROTOR SALIENCY-TRACKING BASED SENSORLESS VECTOR CONTROL DRIVE FOR PMSM

Sensorless control of BLDC motors using an improved low-cost back EMF detection method

Quantitative Characteristic Comparison Between Sensorless Six Step and Field Oriented Control Methods for Permanent Magnet Brushless DC Motors

Sensorless High‐speed BLDC Machine Using Hardware‐rfo

Control of High-Speed Sensorless PM Brushless DC Motors

A Sensorless Control Algorithm for the Circular Winding Brushless DC Motor Based on Phase Voltages and DC Current Detection