Abstract:To study the influence of wooden walls on the seismic performance of traditional Chinese column-and-tie timber structures, two 1/2-scale two-story and two-span timber structure models were fabricated. The infill wall was not installed in model 1, while model 2 deployed wooden walls for comparison. The damage characteristics, seismic responses, and energy dissipation behaviors of the two models under the seismic ground motions of varying intensity were obtained through shaking table tests. The comparative analyses of the seismic performance of the two models indicated that the pull-out length of the tenon and the slippage degree of the column foot of model 1 were greater than those of model 2 with the same input. Moreover, the first natural frequency of model 2 was greater than that of model 1 due to the existence of the wooden walls, and the stiffness degradation rate of model 2 was lower than that of model 1. The first damping ratio of model 1 was between 10.2% and 15.0%, and that of model 2 was between 9.3% and 21.9%. The acceleration amplification factors of the two models were basically less than 1, which was significantly different from regular reinforced concrete structures or steel structures. When the input peak ground acceleration reached 0.22 g (the maximum considered earthquake for the region with intensity seven), the maximum story drifts of the two models were 1/47 and 1/59, respectively, which met the story drift limit of 1/30 for timber frames in the Chinese Seismic Code for Timber Structures. The lateral stiffness of model 2 increased because of the existence of the wooden walls when compared with model 1. The energy dissipation of model 2 was greater than that of model 1 under the same earthquake excitation in terms of the deformation of the wooden walls and squeezing interaction between the timber frame and wooden walls.

Experimental study on the seismic mechanism of a full-scale traditional Chinese timber structure

Seismic Performance Evaluation for a Traditional Chinese Timber-frame Structure

Hysteresis behavior of traditional timber structures by full-scale tests

Seismic performance of Chinese traditional timber frames

Seismic Damage Evaluation Model of Chinese Ancient Timber Buildings

An experimental and simulated investigation into the seismic performance of Chuan-dou timber structures with infilled walls

Experimental seismic response of a column-and-tie wooden structure

Shaking Table Test on 1/2-Scale Model of Column-and-Tie Timber Structure Filled with Wooden Walls

Shake table tests on the traditional column-and-tie timber structures

Long-period seismic response of ancient timber buildings

Seismic Performance Evaluation of Damaged Ancient Timber Structures with Looseness Mortise-Tenon Joints

Study on the Dynamic Structural Characteristics of an Ancient Timber — Yingxian Wooden Pagoda

Shaking table tests on seismic behavior of ancient timber structure reinforced with CFRP sheet

Shaking table test of joints strengthened with CFRP sheet in Chinese ancient timber structure

Investigation on the Seismic Damage and Identification of Lateral Stiffness for Ancient Timber Structures

Dynamic Analysis Model of Monolayer Hall-Style Ancient Timber Structure

Evaluation of Dynamic Behaviors and Damage Mechanism of Ancient Timber Architectures

Seismic evaluation of a traditional Chinese palace-style timber structure

The Seismic Response Of Long Span Continuous Rigid Frame Box Girder Bridges Subjected To Spatially Varying Ground Motions

Seismic Performance Analysis of Ancient Palace-Style Timber Structure Considering Column Rocking Effect

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns