Abstract:CNTs/Ti composites (Carbon nanotube reinforced titanium matrix composites) with a novel micro-nano laminated structure consisting of alternating CNTs nanolayers and Ti microlayers were successfully prepared by electrophoretic deposition combined with spark plasma sintering and temperature-controlled rolling. The CNTs/Ti composites exhibited a simultaneous enhancement in both strength and ductility compared to pure Ti fabricated by the same methods, despite the addition of CNTs being an ultra-low 0.02 weight percent (wt.%). The improvement in strength was attributed to (i) the high strengthening efficiency of individually dispersed, structurally intact CNTs and (ii) Heterogeneous deformation-induced (HDI) strengthening resulting from the heterogeneous deformation between soft Ti microlayers and hard CNTs nanolayers. Furthermore, the HDI hardening induced by the micro-nano laminated structure led to extra work hardening, enhancing the uniform deformability of CNTs/Ti composites. Consequently, strain localization was suppressed, as observed by in-situ tensile experiments, thereby preventing the initiation of interfacial. Additionally, interfacial crack propagation was significantly delayed due to CNTs bridging and crack tip blunting by ductile Ti microlayers, thereby promoting the total elongation to failure. Moreover, a progressive fracture process consisting of three stages was proposed, based on three-dimensional visualization and quantitative analysis of crack volumes. This provided a new strategy for overcoming the strength-ductility trade-off of traditional metal (Ti, Al, Fe, Ni, etc.) matrix composites through the reasonable design of a hierarchical architecture based on an ultra-low amount of high-quality nanoscaled reinforcements.

Nanodiamonds reinforced titanium matrix nanocomposites with network architecture

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

Effect of Nanodiamond Contents on Microstructure and Properties of Titanium Matrix Nanocomposites with Network Microstructure

Achieving high performance in (NiTi<sub>2</sub> + TiC)/Ti composites with network architecture via reaction interface design

Nano-TiB Whiskers Reinforced Ti–6Al–4 V Matrix Composite Fabricated by Direct Laser Deposition: Microstructure and Mechanical Properties

Constructing Micro-Network of Ti2Cu and In-Situ Formed TiC Phases in Titanium Composites As New Strategy for Significantly Enhancing Strength

The Distribution of Reinforcements in Titanium Matrix Composites Enhanced with Graphene: from Dispersed to Networked

Interfacial modification strategy to break through the strength and ductility trade-off in multi-walled carbon nanotubes reinforced titanium matrix composites

Simultaneously Enhancing the Strength and Ductility in Titanium Matrix Composites Via Discontinuous Network Structure

Constructing micro-network of Ti 2 Cu and in-situ formed TiC phases in titanium composites as new strategy for significantly enhancing strength

Mechanical properties of titanium metal matrix nanocomposites reinforced with multiwalled carbon nanotubes, graphene and nanodiamonds prepared by spark plasma sintering

Titanium/nanodiamond Nanocomposites: Effect of Nanodiamond on Microstructure and Mechanical Properties of Titanium

Improved Mechanical Properties in Titanium Matrix Composites Reinforced with Quasi-Continuously Networked Graphene Nanosheets and In-Situ Formed Carbides

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Effect of Network Size on Mechanical Properties and Wear Resistance of Titanium/nanodiamonds Nanocomposites with Network Architecture

Spark Plasma Forging and Network Size Effect on Strength-Ductility Trade-off in Graphene Reinforced Ti6Al4V Matrix Nanocomposites

Overcoming Strength-Ductility Trade-off by Building a Micro-Nano Laminated Structure Based on an Ultralow Amount of Single-Dispersed Carbon Nanotubes

Heterogeneous Network Structures Formed in TiC/TC4/β-Ti Composites for Enhancing Strength with Good Ductility

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Evading the strength and ductility trade-off dilemma in titanium matrix composites through designing bimodal grains and micro-nano reinforcements