Abstract:The main technical challenge of the medium-voltage Permanent Magnet Synchronous Motor (PMSM) drives with Modular Multilevel Converter (MMC) is the serious low-frequency fluctuation on the capacitor voltages. Therefore, a Hybrid Low Capacitance MMC (HLC-MMC) topology based on horizontal sub-module (SM) interconnection is proposed in this paper. Based on the three-phase symmetry of the input fluctuation currents of the sub-modules of the HLC-MMC, a fluctuation current coupling channel is established between the sub-modules with the same horizontal position of the three phases. The fluctuation currents are coupled and cancelled in the interconnection channel, and the amplitude of the fluctuation currents flowing into the sub-module capacitors is reduced. A switch tube in series with the DC bus is turned on and off at a regular frequency. The average DC voltage component in the bridge arm voltage is reduced and the voltage ripple of the capacitor is reduced. Then, a new control method is proposed for the HLC-MMC topology, where the energy is equalized between the upper and lower bridge arms of each stage by adjusting the fundamental frequency current components. The switching frequency of the series switches on the DC bus is controlled by duty cycle, and the measured average voltage of the control sub-module capacitors is equal to the reference voltage value. The overall energy of the system is balanced and the sub-module capacitor voltage ripple is further reduced. The correctness and effectiveness of the topology and the proposed control method are verified by simulation.

Comparative Study of High-Frequency Injection Method and HMMC for Suppressing Capacitor Voltage Fluctuation of MMC

Capacitor Voltage Fluctuation Suppression Method Based on Improved MMC Topology for Variable-Frequency Drive Application

Analysis and Injection Control of Zero-sequence Voltage and Circulating Current for MMC with Active Power Filter

Capacitance Reduction of the Hybrid Modular Multilevel Converter by Decreasing Average Capacitor Voltage in Variable-Speed Drives

A Modular Multilevel Converter with Active Power Filter for Submodule Capacitor Voltage Ripples and Power Losses Reduction

Capacitor Voltage Ripple Reduction Of Hybrid Modular Multilevel Converter Based On Third-Harmonic Injection

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction

A variable frequency injection method for modular multilevel converters in variable speed drives

A Hybrid Low Capacitance Modular Multilevel Converter for Medium Voltage PMSM Drive and Its Control Method

Voltage Balancing and Fluctuation-Suppression Methods of Floating Capacitors in A New Modular Multilevel Converter

An improved high-frequency common-mode voltage injection method in modular multilevel converter in motor drive application

Comparative Study of the Sinusoidal-Wave and Square-Wave Circulating Current Injection Methods for Low-Frequency Operation of the Modular Multilevel Converters

A Rotation-Based Capacitor-Voltage-balancing Method for Modular Multilevel Converters

A new approach for suppressing DC voltage ripples of MMC-HVDC

An Improved Circulating Current Injection Method for Modular Multilevel Converters in Variable-Speed Drives

A Hybrid Modular Multilevel Converter for Medium-Voltage Variable-Speed Motor Drives

A Modified Modular Multilevel Converter with Reduced Capacitor Voltage Fluctuation

Overview of the Modular Multilevel Converter Based High Voltage Motor Drive

Capacitance Reduction Control for Sub-module of Modular Multilevel Converter Applied in Wind Power Generation

Control of the hybrid modular multilevel converter in motor drive applications

Study on Capacitor Voltage Balancing Control of Modular Multilevel Converter at Low Frequency