Abstract:The main technical challenge of the medium-voltage Permanent Magnet Synchronous Motor (PMSM) drives with Modular Multilevel Converter (MMC) is the serious low-frequency fluctuation on the capacitor voltages. Therefore, a Hybrid Low Capacitance MMC (HLC-MMC) topology based on horizontal sub-module (SM) interconnection is proposed in this paper. Based on the three-phase symmetry of the input fluctuation currents of the sub-modules of the HLC-MMC, a fluctuation current coupling channel is established between the sub-modules with the same horizontal position of the three phases. The fluctuation currents are coupled and cancelled in the interconnection channel, and the amplitude of the fluctuation currents flowing into the sub-module capacitors is reduced. A switch tube in series with the DC bus is turned on and off at a regular frequency. The average DC voltage component in the bridge arm voltage is reduced and the voltage ripple of the capacitor is reduced. Then, a new control method is proposed for the HLC-MMC topology, where the energy is equalized between the upper and lower bridge arms of each stage by adjusting the fundamental frequency current components. The switching frequency of the series switches on the DC bus is controlled by duty cycle, and the measured average voltage of the control sub-module capacitors is equal to the reference voltage value. The overall energy of the system is balanced and the sub-module capacitor voltage ripple is further reduced. The correctness and effectiveness of the topology and the proposed control method are verified by simulation.

Control of the hybrid modular multilevel converter in motor drive applications

A Hybrid Modular Multilevel Converter for Medium-Voltage Variable-Speed Motor Drives

An Improved Low-Frequency Ripple Suppression Method for Modular Multilevel Converter in Variable-Speed Motor Drive Application

Capacitance Reduction of the Hybrid Modular Multilevel Converter by Decreasing Average Capacitor Voltage in Variable-Speed Drives

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction

A Flexible Reduced Capacitor Voltages Strategy for Variable-Speed Drives with Modular Multilevel Converter

A Modified Modular Multilevel Converter for Motor Drives Capable of High-Torque Operation at Zero/Low Motor Speeds

A Hybrid Low Capacitance Modular Multilevel Converter for Medium Voltage PMSM Drive and Its Control Method

An Improved Circulating Current Injection Method for Modular Multilevel Converters in Variable-Speed Drives

An improved high-frequency common-mode voltage injection method in modular multilevel converter in motor drive application

A New Control Strategy for Modular Multilevel Converter Operating in Quasi Two-Level PWM Mode

Back-to-back Hybrid Modular Multilevel Converters for Ac Motor Drive.

Hybrid back-to-back MMC system for variable speed AC machine drives

Overview of the Modular Multilevel Converter Based High Voltage Motor Drive

A Coordinated Strategy of Low-Speed and Start-Up Operation for Medium-Voltage Variable-Speed Drives with a Modular Multilevel Converter

A new approach for suppressing DC voltage ripples of MMC-HVDC

Study on Capacitor Voltage Balancing Control of Modular Multilevel Converter at Low Frequency

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

Modular Multilevel Converter with Thyristor DC-link Switch for Full-torque Variable-speed Drives

Capacitor Voltage Ripple Analysis of Hybrid Modular Multilevel Converter in Fan-/Pump-like Load Applications

Comparative Study of High-Frequency Injection Method and HMMC for Suppressing Capacitor Voltage Fluctuation of MMC