Abstract:A zeolite/polymer composite hollow fiber (CHF) support is used to investigate the effects of three different silica sources (sodium metasilicate nonahydrate, silica sol and sodium silicate) of the synthesis hydrogel on the properties of zeolite LTA membrane prepared on the outer surface of the support by in situ hydrothermal synthesis at 100°C. The as-synthesized membranes and powders from the synthesis hydrogel are characterized by X-ray diffraction. The morphology and thickness of the membranes are observed by scanning electron microscopy. The separation factor and flux are evaluated by pervaporation (PV) test at 75°C using 90wt.% ethanol aqueous solution. It is difficult to obtain high performance membranes on the CHF support using sodium metasilicate nonahydrate as silica source, while continuous zeolite membranes with high separation factor (>10,000) and flux (>6.4kg/m2h) can be well synthesized using silica sol or sodium silicate as silica source. The reason of these differences is further explored by changing the alkalinity of the synthesis hydrogel (the content of sodium hydroxide). It is found that the crystallization rate of the synthesis hydrogel is a crucial factor to obtain zeolite membranes with high PV performance by static in situ hydrothermal synthesis. The separation performance of the membrane synthesized even using sodium metasilicate nonahydrate as silica source can be greatly improved by dynamic hydrothermal synthesis using rotating autoclaves.

Tailoring Hydrogen Separation Performance Through the Ceramic Lanthanum Tungstate Membranes by Chlorine Doping

Metalloid Phosphorus Cation Doping: an Effective Strategy to Improve Permeability and Stability Through the Hydrogen Permeable Membranes

Tuning the Separation Performance of Hydrogen Permeable Membranes Using an Anion Doping Strategy

Phase-inversion Synthesize of Asymmetric-Structured La5.5W0.6Mo0.4O11.25-δ Membranes with Enhanced Hydrogen Permeation Flux

Asymmetric Membrane Structure: an Efficient Approach to Enhance Hydrogen Separation Performance

Effect of the La/W Ratio in Lanthanum Tungstate on the Structure, Stability and Hydrogen Permeation Properties

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

Tailoring alkaline metals ion doped La2Ce2O7‐δ proton conductor for hydrogen permeation membranes

An effective strategy to boost hydrogen separation performance through stable mixed proton‐electron conducting membrane

A mixed electronic and protonic conducting hydrogen separation membrane with asymmetric structure

A CO2‐stable Hollow‐fiber Membrane with High Hydrogen Permeation Flux

Enhanced Hydrogen Permeability of Mixed Protonic-Electronic Conducting Membranes through an In-situ Exsolution Strategy

Niobium and Molybdenum Co-Doped La5.5WO11.25−δ Membrane with Improved Hydrogen Permeability

Electrochemical properties of Sr-doped La2-xSrxCe2O7-δ hydrogen separation membrane

Pilot Scale Fabrication of Lanthanum Tungstate Supports for H2 Separation Membranes

CO2-tolerant U-shaped Hollow Fiber Membranes for Hydrogen Separation

Preparation and its H2-permeable characteristics of Nd doped La5.5 WO12-δ

Enhanced H2 production by using La5.5WO11.25-δ-La0.8Sr0.2FeO3-δ mixed oxygen ion-proton-electron triple-conducting membrane

Effect of Pt Layer on the Hydrogen Permeation Property of La5.5W0.45Nb0.15Mo0.4O11.25-δ Membrane

Chlorine-resistant loose nanofiltration membranes based on interface quaternization of hexamethylenetetramine

CO2-tolerant Ni-La5.5WO11.25-δ Dual-Phase Membranes with Enhanced H2 Permeability