Abstract:In recent years, polymer-based dielectric capacitors have attracted much more attention due to the advantages of excellent flexibility, light weight, and high power density. However, most studies focus on energy storage performances of polymer-based dielectrics at room temperature, and there have been relatively fewer investigations on polymer-based dielectrics working under high-temperature conditions, which is much closer to the practical applications. Besides, dielectric capacitors operating in a high-temperature environment require excellent temperature stability of structure and performance. In this paper, high-temperature-resistant polyimide (PI) is selected as the matrix material, and 0.5Ba(Zr0.2Ti0.8)O-3-0.5(Ba0.7Ca0.3)TiO3 (BZT-BCT) nanofibers are used as the filling phase. By analyzing the energy storage behaviors of BZT-BCT/PI composites at different temperatures, it can be found that when the doping content of BZT BCT-nanofibers is more than 1 vol % the dielectric strength of the composites drops sharply when the temperature increases from 25 to 150 degrees C, resulting in serious deterioration of energy storage properties. On the basis of this, a composite film with a sandwich structure has been designed, where BZT-BCT/PI with different volume fractions is the intermediate layer and hexagonal boron nitride (h-BN) with good thermal and insulating properties is introduced in the top and bottom layers with a content of 5 vol %. Consequently, the results have shown that the energy storage properties of the constructed sandwiched dielectric composite films exhibit excellent temperature stability. The maximum field strength of the composite film with a BZT-BCT content of 1 vol % in the intermediate layer is 360 and 350 kV/mm under temperatures of 25 and 150 degrees C, and the storage density is 2.3 and 1.83 J/cm(3) respectively.

Excellent Energy Storage Properties with High-Temperature Stability in Sandwich-Structured Polyimide-Based Composite Films

Ultrahigh discharge efficiency and improved energy density in polymer-based nanocomposite for high-temperature capacitors application

Polyimide-Based Composite Films with Largely Enhanced Energy Storage Performances toward High-Temperature Electrostatic Capacitor Applications

Improvement of high‐temperature energy storage properties of polyimide‐based nanocomposites with sandwich structure

Enhanced energy storage properties of thermostable sandwich-structured BaTiO3/polyimide nanocomposites with better controlled interfaces

Regulation of Interfacial Polarization and Local Electric Field Strength Achieved Highly Energy Storage Performance in Polyetherimide Nanocomposites at Elevated Temperature via 2D Hybrid Structure

High-temperature Polymer Dielectric Films with Excellent Energy Storage Performance Utilizing Inorganic Outerlayers

High-temperature Energy Storage with a New Tri-Layers Polymer Composites Via Hybrid Assembly Engineering

High‐temperature Energy Storage Dielectric with Inhibition of Carrier Injection/migration Based on Band Structure Regulation

Thermally stable polyimide nanocomposite films from electrospun BaTiO3 fibers for high-density energy storage capacitors

Superior dielectric energy storage performance for high-temperature film capacitors through molecular structure design

Sandwich-structured Polymer Dielectric Composite Films for Improving Breakdown Strength and Energy Density at High Temperature

Enhanced Energy Density and Thermostability in Polyimide Nanocomposites Containing Core-Shell Structured BaTiO 3 @sio 2 Nanofibers

Single-Crystalline BaZr<sub>0.2</sub>Ti<sub>0.8</sub>O<sub>3</sub> Membranes Enabled High Energy Density in PEI-Based Composites for High-Temperature Electrostatic Capacitors

Multi-layered boron nitride/polyimide high-temperature capacitor dielectric film

Ultra‐High Capacitive Energy Storage Density at 150 °C Achieved in Polyetherimide Composite Films by Filler and Structure Design

Constructing polyimide-based nanocomposite dielectrics with superior high‐temperature energy storage performance via using ternary structure strategy

Inhibition conduction loss for distinct improvement of energy storage density over a broad temperature range in polyetherimide-based composite films

Sandwich-structured polymers with electrospun boron nitrides layers as high-temperature energy storage dielectrics

Cost-effective Strategy for High-Temperature Energy Storage Performance of Polyimide Nanocomposite Films

Enhanced Dielectric Thermal Stability and Permittivity of Flexible Composite Films Based on BaTiO3 Nanoparticles Highly Filled PVDF/PAN Blend Nanofibrous Membranes