A Systematic Study on Factors Influencing the Accuracy of MLAA

Wentao Zhu,Tao Feng,Yun Dong,Jun Bao,Hongdi Li
DOI: https://doi.org/10.1109/nssmic.2017.8532766
2017-01-01
Abstract:Maximum likelihood of attenuation and activity (MLAA) for time-of-flight (TOF) PET works well in theory. However in real systems it is subject to various types of errors. This paper provides a systematic study on the accuracy of MLAA due to errors of different factors, and further ranks the relative significance of these factors. The influence of various factors on the accuracy of MLAA was investigated as follows. For random correction, scatter correction, TOF timing kernel and detector timing offsets, a gradual increasing bias was applied upon the simulated ground truth as estimation error. The accuracy of MLAA-generated umap versus error of each factor was then computed and plotted. Furthermore, the significance of these factors was compared. A torso XCAT phantom was used in simulation. The bias for random and scatter estimation was set to vary between 0~10%. The timing kernel in reconstruction was set to vary from 400~600ps (tribe timing resolution 500ps). A timing offset table was scaled and applied on the zero-offset TOF data to simulate detector timing drifts. In the simulated study, the bias of random estimation incurred smallest error for MLAA-generated umap, while the timing offset incurred the largest. The normalized root mean square error (NRMSE) for umap was 8.2% when bias of random estimation was 10%, and was 9% with 10% scatter estimation bias. An overestimation (125ps) or underestimation (-75ps) of timing resolution resulted in close NRMSE (9.3%) for the umap, indicating underestimation of timing resolution is more severe for MLAA. On the other hand, average SOps drift (<;to% timing resolution, more likely to happen than other errors) made MLAA results visually unacceptable. For practical system status, timing offset and timing kernel are more important than random or scatter estimation to the overall accuracy of MLAA. The conclusion may contribute towards a better system development.
What problem does this paper attempt to address?