Abstract:Highly flexible, nonvolatile resistive switching-based memory devices with a hierarchical thin-film architecture were fabricated using a low-temperature, cost-efficient solution processing technique. The device structure consists of an ITO-coated flexible PET substrate as the bottom electrode and a PMMA-embedded reduced-graphene/ZnO nanoparticle (NP) (rGO/ZnO NP) heterostructure as the flexible active layer. Besides, a PMMA-embedded graphene oxide (GO/PMMA)-based device was also fabricated as a reference. The operating voltage of this device is limited within ±2 V, whereas the ON/OFF current ratio is ∼106, which is ∼103 times higher than the reference device. The device also exhibited excellent endurance and retention characteristics, with no significant degradation for more than 50 cycles. Besides, the retention time of this device is ∼104 s, which is several times more than that of the reference device. These electrical performance enhancements were attributed to the multifunctionality introduced by the rGO/ZnO NP heterostructures, which combine the excellent conductivity of rGO nanosheets with charge trapping and transport properties and high electron mobility of ZnO nanostructures. A model based on the energy band of the components of this composite material has been proposed for a better understanding of this mechanism. Flexibility studies exhibited stable device performance for an extreme bending radius of 6 mm. The resistance of the device in ON and OFF states did not show any significant change even after 1000 bending cycles, thus establishing the device as an excellent memory candidate for flexible electronic applications such as flexible displays and sensors, wearable devices, implantable medical devices, and portable diagnostic devices.

Control of Resistive Switching Voltage by Nanoparticle‐Decorated Wrinkle Interface

Polymer Memory Devices: Control of Resistive Switching Voltage by Nanoparticle‐Decorated Wrinkle Interface (adv. Electron. Mater. 5/2019)

Reduced Graphene Oxide Electrodes with Wrinkled Surface for Nonvolatile Polymer Memory Device Compatibility

Reversible Transition of Volatile to Non-Volatile Resistive Switching in Cu/SiNx/ZnO/Pt Memristor

A Universal Strategy for Stretchable Polymer Nonvolatile Memory via Tailoring Nanostructured Surfaces

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Interface Engineering With Mos2-Pd Nanoparticles Hybrid Structure For A Low Voltage Resistive Switching Memory

Novel Covalent-Organometallic Polymer for Highly Stable Nano-Resistive Switching Memories

A phase separation strategy for precisely controllable writing voltage of polymer flash memory

Enabling Superior Stretchable Resistive Switching Memory Via Polymer-Functionalized Graphene Oxide Nanosheets

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

Fabrication of Carboxymethyl Cellulose and Graphene Oxide Bio-Nanocomposites for Flexible Nonvolatile Resistive Switching Memory Devices.

Solution-Processable 2D Polymer/Graphene Oxide Heterostructure for Intrinsic Low-Current Memory Device

Bulk Heterojunction Polymer Memory Devices With Reduced Graphene Oxide As Electrodes

Nonvolatile resistance switching memory devices fabricated from the photopolymerized poly( N -vinylcarbazole)-graphene oxide composites

Nonvolatile Rewritable Memory Effects in Graphene Oxide Functionalized by Conjugated Polymer Containing Fluorene and Carbazole Units

Vacancy Associates-Rich Ultrathin Nanosheets for High Performance and Flexible Nonvolatile Memory Device

Multifunctional Polymer Memory via Bi-Interfacial Topography for Pressure Perception Recognition.

Polymer Memristive Layer with Reduced Graphene Oxide and Al Electrodes for Tunable Memory Windows with Low-Power Operation and Enhanced Electrical Readout

Non-Polar and Complementary Resistive Switching Characteristics in Graphene Oxide devices with Gold Nanoparticles: Diverse Approach for Device Fabrication