Abstract:Acoustic wave sensors with a high sensitivity and small size are highly desired for a wide variety of important and emerging applications such as photoacoustic gas sensing and bio-imaging. Here we present an ultracompact optical fiber acoustic sensor based on an optomechanical resonator that is directly in situ printed on the end face of a standard single-mode optical fiber by using an optical 3D μ-printing technology. The fiber-top optomechanical microresonator is composed of a microscale suspended polymer micro-disk that forms a Fabry-Perot interferometric cavity, together with the optical fiber end face, and acts as the acoustic wave-sensitive micromechanical resonator simultaneously. The microbeams for suspending the micro-disk are devised with a spiral structure to overcome the small-size imposed low deflection amplitude so as to improve its sensitivity to acoustic waves. The sensor with a high sensitivity of 118.3 mV/Pa and low noise equivalent acoustic signal level of 0.328µPa/Hz1/2 at audio frequency is experimentally demonstrated. Moreover, with a resonance amplification mechanism, the sensitivity can be enhanced by 40.1 times when the frequency of the acoustic wave matches with the natural resonance frequency of the optomechanical resonator. Such an ultrasmall fiber-tip acoustic sensor has not only a miniaturization-induced broad bandwidth, but also a structure-enhanced ultrahigh sensitivity and thus is very promising in various acoustic wave-based sensing, imaging, and testing applications.

High Sensitivity All-Optical Acoustic Pressure Sensor Based on Resonant Micro-Opto-mechanical Cantilever with Integrated Rib Waveguide

All-Fiber Acoustic Sensor Based on Anti-Resonant Reflective Optical Waveguide

High-Sensitivity Fabry-Perot Interferometric Acoustic Sensor for Low-Frequency Acoustic Pressure Detections

Highly sensitive low-frequency-detectable acoustic sensor using a piezoresistive cantilever for health monitoring applications

Fiber-optic Fabry-Perot Interferometer Based High Sensitive Cantilever Microphone

High-sensitivity narrow‑band T-shaped cantilever Fabry-perot acoustic sensor for photoacoustic spectroscopy

A High-sensitivity, Small-size Resonant Pressure Microsensor Based on Optimized Resonator-diaphragm Structure.

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

Ultracompact optical fiber acoustic sensors based on a fiber-top spirally-suspended optomechanical microresonator.

Fiber-laser-based Cantilever-Type Vector Sensor for Acoustic Motion Measurement

Self-Aligning Optical MEMS Acoustic Sensors With nPa/√Hz Resolution

A Compact and Highly Sensitive Voice-Eavesdropping Microresonator

MEMS-Based High-Sensitivity Fabry–Perot Acoustic Sensor with a 45° Angled Fiber

Sub-Nanometer Acoustic Vibration Sensing Using a Tapered-Tip Optical Fiber Microcantilever

Pressure Sensor Based on Optical Resonator in a Compact Plasmonic System

Ultra-High-Sensitivity, Miniaturized Fabry-Perot Interferometric Fiber-Optic Microphone for Weak Acoustic Signals Detection

Miniature High-Frequency Response, High- Pressure -Range Dynamic Pressure Sensor Based on All-Silica Optical Fiber Fabry-Perot Cavity

Sensitive, small, broadband and scalable optomechanical ultrasound sensor in silicon photonics

A Sensitivity-Enhanced Flexible Acoustic Sensor Using Side-Polished Fiber Bragg Grating

Small In-Fiber Fabry-Perot Low-Frequency Acoustic Pressure Sensor with PDMS Diaphragm Embedded in Hollow-Core Fiber

Simultaneous measurement of acoustic pressure and temperature using a Fabry-Perot interferometric fiber-optic cantilever sensor