Abstract:The world is hungry for energy with an estimated need of 20 TW-year at present. The demand of electrical power (approximately 1/4) could be supplied by the construction of a few 1,000 nuclear fusion power plants each providing 1 GW of clean electrical energy. After achieving the main challenge of producing and confining a deuterium-tritium plasma, the economic, safety, and environmental impact factors will have to be considered for the development of advanced reactor structural materials. These materials will have to withstand demanding heat and radiation flux environments during an estimated 30-40 years of device lifetime with doses of 200 dpa and temperatures of 1,000 oC. Current fusion structural candidate materials such as bcc ferritic/martensitic, fcc austenitic stainless steels, or ODS steels have serious limitations after exposure to radiation and heat fields in terms of their induced brittleness at room temperatures, or fracture by creep at high temperatures. HEA (high entropy alloys) are a new type of complex metallic material that are fabricated on the basis that the alloy contains multiple principal elements. HEAs have come to attention after their intrinsic radiation resistance, and excellent mechanical properties both at low and intermediate temperatures. The chemical complexity is at present the source of many hypotheses about their properties, in particular their phase stability at temperature and irradiation resistance. In this thesis, a novel formulation of short-range order based on electronic structure methods is developed for predicting phase stability in bcc HEAs. This was used to predict the formation of a bcc phase, associated with a Cr-Cr-Cr-Cr tetrahedron cluster, in an fcc lattice. In experimental work, in contrast to previous studies, but in agreement with the modelling results, a bcc phase enriched in Cr was observed in the fcc HEA CrMnFeNi following a recrystallisation heat treatment. This phase was also present after irradiating with Ni ions up to 20 dpa at temperatures of 300 and 450 oC, although no significant increase in volume fraction was measured, indicating that matrix stability was maintained. The mechanical properties after the ion irradiation were investigated by nanoindentation. There was a significant increase in hardness with irradiation dose. The associated changes in microstructure were examined by transmission electron microscopy.

Phase Stability of Single Phase Al0.12CrNiFeCo High Entropy Alloy Upon Irradiation

Structural Damage and Phase Stability of Al0.3CoCrFeNi High Entropy Alloy under High Temperature Ion Irradiation

Precipitation behavior of AlxCoCrFeNi high entropy alloys under ion irradiation

Precipitation behavior of Al x CoCrFeNi high entropy alloys under ion irradiation

Enhanced helium ion irradiation tolerance in a Fe-Co-Ni-Cr-Al-Ti high-entropy alloy with L1 2 nanoparticles

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Composition and Structure of NiCoFeCr and NiCoFeCrMn High-Entropy Alloys Irradiated by Helium Ions

Irradiation Effects on Al0.3CoCrFeNi and CoCrMnFeNi High-Entropy Alloys, and 316H Stainless Steel at 500 °C

Atomic scale structure dominated FCC and B2 responses to He ion irradiation in eutectic high-entropy alloy AlCoCrFeNi2.1

Structural Changes in High-Entropy Alloys CoCrFeNi and CoCrFeMnNi, Irradiated by He Ions at a Temperature of 700 °C

The phase stability at intermediate-temperature and mechanical behavior of the dual-phase AlCoCr0.5FexNi2.5 high entropy alloys

Irradiation‐Induced Extremes Create Hierarchical Face‐/Body‐Centered‐Cubic Phases in Nanostructured High Entropy Alloys

The stability of γ′ precipitates in a multi-component FeCoNiCrTi0.2 alloy under elevated-temperature irradiation

Neutron irradiation response of a Co-free high entropy alloy

Simulations of irradiation resistance and mechanical properties under irradiation of high-entropy alloy NiCoCrFe

High-Temperature Oxidation and Phase Stability of AlCrCoFeNi High Entropy Alloy: Insights from In Situ HT-XRD and Thermodynamic Calculations

Microstructure and micromechanical responses of bulk nanostructured high entropy alloy after heavy-ion irradiation at 500°C

The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High‐Entropy Alloy

Role of Aging Temperature on Thermal Stability of Co-free Cr0.8FeMn1.3Ni1.3 High-Entropy Alloy: Decomposition and Embrittlement at Intermediate Temperatures

Radiation behaviour of high-entropy alloys for fusion reactor environments

Control of Nanoscale Precipitation and Elimination of Intermediate-Temperature Embrittlement in Multicomponent High-Entropy Alloys