Abstract:Water safety is closely related to human health, and an efficient and low-cost water disinfection method is far-reaching for all kinds of water supplies. However, how to achieve high-flow water disinfection materials with simple operation is still an open question for practical application. Herein, we first designed and prepared hierarchical Cu7S4 nanowires covered by a N-doped carbon film (Cu7S4@NCNWs) on Cu foam with a simplified solvothermal method and carbonization process. Although without doped nanometal particles, the Cu7S4@NCNW materials still exhibited better conductivity and long-term stability, which comes from the increased interfacial electron transfer rate based on the analyses of Nyquist plots and PL spectra. For the improved filter equipped with Cu7S4@NCNWs, the sterilization rate against Escherichia coli and Staphylococcus aureus could maintain over 99% within 12 h working under a large flow of 1500 mL min–1 and a lower voltage of 10 V, in which efficiency is the best among the previous reports. The designed materials possessing a long-term stable high-flow water disinfection efficiency with a simple method will have a great potential in future practical application.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00930?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00930</a>.Figure S1. XRD pattern of Cu7S4@NWs at different reaction times and (b) different materials; Figure S2. SEM images of the Cu7S4@NCNWs at different temperatures; Figure S3. Nyquist plots for the Cu7S4@NCNW electrodes at different temperatures; Figure S4. EDX for the Cu7S4@NC nanowire; Figure S5. Electric current measurement of different electrodes; Figure S6. SEM photographs of different electrodes after water treatment for different times; Figure S7. Physical image of the large-flow water disinfection test platform and filter device; Table S1. Comparison of voltages, flow rates, contact times, water treatment times, and volumes of water disinfection treatment in different studies (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00930/suppl_file/an1c00930_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Role of Electric Field and Reactive Oxygen Species in Enhancing Antibacterial Activity: A Case Study of 3D Cu Foam Electrode with Branched CuO–ZnO NWs

Nanowire-Modified Three-Dimensional Electrode Enabling Low-Voltage Electroporation for Water Disinfection.

Robust Antibacterial Activity of Tungsten Oxide (WO3-X) Nanodots

Static electricity powered copper oxide nanowire microbicidal electroporation for water disinfection.

Branched CuO-Co3O4 nanowires coated with carbon on Cu foam for water sterilization

Water Disinfection Via Zinc Oxide (ZnO) Nanowires Chemically Fabricated on A Modified Polyurethane Substrate

Copper sulfides (Cu 7 S 4 ) nanowires with Ag anchored in N -doped carbon layers optimize interfacial charge transfer for rapid water sterilization

N-Doped Carbon-Coated Cu 7 S 4 Nanowires on Cu Foam Supports for Water Disinfection

The effect of DON'T CARES on the complexity of combinational circuits

Initiative ROS Generation of Cu-doped ZIF-8 for Excellent Antibacterial Performance

Photogenerated reactive oxygen species and hyperthermia by Cu3SnS4 nanoflakes for advanced photocatalytic and photothermal antibacterial therapy

Hydrodynamic Tearing of Bacteria on Nanotips for Sustainable Water Disinfection.

Local Electric Field-Incorporated In-Situ Copper Ions Eliminating Pathogens and Antibiotic Resistance Genes in Drinking Water

A Self-Powered Sterilization System with Both Instant and Sustainable Antibacterial Ability

Low-voltage alternating current powered polydopamine-protected copper phosphide nanowire for electroporation-disinfection in water

A novel water disinfection method via cuprous ion generation in a copper ferrite/sulfite system and associated mechanism

Universal Water Disinfection by Piezoelectret Aluminium Oxide-Based Electroporation and Generation of Reactive Oxygen Species

Synergistic Nanowire-Enhanced Electroporation and Electrochlorination for Highly Efficient Water Disinfection

Elevating the Stability of Nanowire Electrodes by Thin Polydopamine Coating for Low-Voltage Electroporation-Disinfection of Pathogens in Water

Locally enhanced electric field treatment (LEEFT) for water disinfection

Efficient Air Disinfection Achieved by Nanowire Modified Copper Mesh Electrodes