N-Doped Carbon-Coated Cu 7 S 4 Nanowires on Cu Foam Supports for Water Disinfection
Shaogang Cui,Shougang Chen,Haoyu Wang,Liting Dong,Shuting Wang
DOI: https://doi.org/10.1021/acsanm.1c00930
IF: 6.14
2021-05-26
ACS Applied Nano Materials
Abstract:Water safety is closely related to human health, and an efficient and low-cost water disinfection method is far-reaching for all kinds of water supplies. However, how to achieve high-flow water disinfection materials with simple operation is still an open question for practical application. Herein, we first designed and prepared hierarchical Cu<sub>7</sub>S<sub>4</sub> nanowires covered by a N-doped carbon film (Cu<sub>7</sub>S<sub>4</sub>@NCNWs) on Cu foam with a simplified solvothermal method and carbonization process. Although without doped nanometal particles, the Cu<sub>7</sub>S<sub>4</sub>@NCNW materials still exhibited better conductivity and long-term stability, which comes from the increased interfacial electron transfer rate based on the analyses of Nyquist plots and PL spectra. For the improved filter equipped with Cu<sub>7</sub>S<sub>4</sub>@NCNWs, the sterilization rate against <i>Escherichia coli</i> and <i>Staphylococcus aureus</i> could maintain over 99% within 12 h working under a large flow of 1500 mL min<sup>–1</sup> and a lower voltage of 10 V, in which efficiency is the best among the previous reports. The designed materials possessing a long-term stable high-flow water disinfection efficiency with a simple method will have a great potential in future practical application.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00930?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00930</a>.Figure S1. XRD pattern of Cu<sub>7</sub>S<sub>4</sub>@NWs at different reaction times and (b) different materials; Figure S2. SEM images of the Cu<sub>7</sub>S<sub>4</sub>@NCNWs at different temperatures; Figure S3. Nyquist plots for the Cu<sub>7</sub>S<sub>4</sub>@NCNW electrodes at different temperatures; Figure S4. EDX for the Cu<sub>7</sub>S<sub>4</sub>@NC nanowire; Figure S5. Electric current measurement of different electrodes; Figure S6. SEM photographs of different electrodes after water treatment for different times; Figure S7. Physical image of the large-flow water disinfection test platform and filter device; Table S1. Comparison of voltages, flow rates, contact times, water treatment times, and volumes of water disinfection treatment in different studies (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00930/suppl_file/an1c00930_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology