Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

Precursor solution temperature dependence of the optical constants, band gap and Urbach tail in organic–inorganic hybrid halide perovskite films

Effects of Deposition Methods and Processing Techniques on Band Gap, Interband Electronic Transitions, and Optical Absorption in Perovskite Ch3nh3pbi3 Films

Modulation of strain, electric field and organic cation rotation on the band gap and electronic structures of organic-inorganic hybrid perovskite CH3NH3PbI3

Optical Properties of Organometallic Perovskite: An ab initio Study using Relativistic GW Correction and Bethe-Salpeter Equation

Photophysical Properties, Stability and Microstructures of Temperature-Dependent Evolution of Methylammonium Lead Bromide Perovskite

Photophysics of Organic–Inorganic Hybrid Lead Iodide Perovskite Single Crystals

Influences of the orientations of CH3NH3 molecules on physical properties of organo-inorganic hybrid perovskite CH3NH3PbI3

Influence of Hydration Water on CH3NH3PbI3 Perovskite Films Prepared Through One-Step Procedure.

Effect of reaction temperature on film quality and cell performance: Comparative study of single and mixed cation/halide perovskites

Preparing High-Efficiency Perovskite Solar Cells

Revealing unusual bandgap shifts with temperature and bandgap renormalization effect in phase-stabilized metal halide perovskite thin films

The Optical Properties of Organic Halide Perovskites

Synthesis and investigation of the properties of organic-inorganic perovskite films with non-contact optical methods

Temperature-dependent excitonic photoluminescence of hybrid organometal halide perovskite films.

Efficient Thermal Conductance in Organometallic Perovskite CH3NH3PbI3 Films

Revealing unusual bandgap shifts with temperature and bandgap renormalization effect in phase-stabilized metal halide perovskites

Organometallic Perovskite Solar Cells-Temperature Effect Study

Constructing the Electronic Structure of CH3NH3PbI3 and CH3NH3PbBr3 Perovskite Thin Films from Single-Crystal Band Structure Measurements.

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells

Temperature Dependence of the Energy Levels of Methylammonium Lead Iodide Perovskite from First-Principles

Effect of Temperature on the Efficiency of Organometallic Perovskite Solar Cells