Abstract:Random sequence adsorption algorithm, Python and ABAQUS joint simulation, preparation and precise prediction of micro mechanical properties of CF/PLA and SIC/PLA composites containing different volume contents of CF particles and SIC particles. At present, it exists the problems of poor computational accuracy of the micromechanical model and insufficient adaptive matching of the RVE unit cell model boundary conditions, being caused by the random distribution of particle size and quantity in particle composite materials. As for the above problems, the paper proposes a micromechanical model that uses a random sequence adsorption algorithm to deeply match and enhance the random distribution of particles, and a subroutine joint simulation method to generate boundary conditions quickly and automatically. The RVE unit cell model of particulate composites are numerically simulated at the micromechanical level. It was found that the enhancement of the mechanical properties of the base material by enhancing particles is highly consistent with the actual improvement value. The simulation values and actual values of particle composite materials with different volume contents are also accurately consistent. In addition, with the increase of particle volume content, its reinforcement effect on the base material first increases and then decreases, and there exists an optimal mixing ratio and a minimum mixing ratio. The optimal mixing ratio for short cut fiber reinforced particles is 50%, with a minimum mixing ratio of 10%. The optimal mixing ratio for silicon carbide reinforced particles is 40%, with a minimum mixing ratio of 8%. Through experimental results, it has been verified that the micromechanical model can quickly and accurately predict the elastic constants and Poisson's ratio of composite materials under periodic displacement boundary conditions, with a prediction accuracy of within 10%. Highlights Effectively solve the problems such as the random distribution of the size and quantity of reinforced particles in the particle composite material and the difficulty in adding the boundary conditions of the micro‐RVE unit cell model in the macro composite material. A random sequence adsorption algorithm is proposed to generate the RVE cell model with reinforced particles, and the periodic displacement boundary conditions are added to the RVE cell model through Python and Abaqus joint simulation. The simulation results show that the stress of chopped fiber reinforced particles is about 1.96 times that of the matrix material, and the stress of SiC reinforced particles is about 2.1 times that of the matrix material, and the optimal mixing ratio of chopped fiber reinforced particles is 50% and that of silicon carbide reinforced particles is 40%. The proposed micromechanical model can accurately predict the elastic constants of composites under periodic boundary conditions, and its prediction accuracy can be controlled within 10%. In this paper, a more reasonable meso‐stress‐strain field of single cell element is given, which can provide reference for studying the meso‐failure mechanism and nonlinear mechanical behavior of particle composites.

Three-dimensional Multi-Particle FE Model and Effects of Interface Damage, Particle Size and Morphology on Tensile Behavior of Particle Reinforced Composites

A Lennard-Jones Potential Based Cohesive Zone Model and Its Application in Multiscale Damage Simulation of Graphene Reinforced Nanocomposites

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

An enhanced fem model on the deformation behavior of sic / aluminum composites

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Analysis of Particle-Dispersed Composites Accounting Stochastically for Interfacial Damage

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Microstructure-based simulation on the mechanical behavior of particle reinforced metal matrix composites with varying particle characteristics

A Three-Dimensional Strain Gradient Plasticity Analysis of Particle Size Effect in Composite Materials

Size and Interface Effects on Tensile Strength of Polymers with Nano/Micro Particle Inclusions

Numerical analysis on the effects of particle configuration on the damage and mechanical properties of particle reinforced MMCs under dynamic compression

541 Modeling of particle dispersed composite with meso-scale delamination or sliding

The effect of interface properties on the mechanical behavior of 3D braided composites under unidirectional tensile loading

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

Numerical simulation and experimental study on mesomechanics properties of particulate composites

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Interfacial effect on mechanical behaviors of bidirectional-fiber-reinforced composites

A 3D objective material model for elastic-plastic damage behavior of fiber reinforced polymer composites

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

Meso-scale characterization and discrete element simulation of fiber-reinforced resin-mineral composite