Ionic Liquid/ether-Plasticized Quasi-Solid-state Electrolytes for Long-Life Lithium–oxygen Cells

Chongjia Zhu,Qiushi Sun,Jian Xie,Yuan Jin,Kangyan Wang,Zhen Chen,Jian Tu,Gaoshao Cao,Xinbing Zhao

DOI: https://doi.org/10.1039/c8nj03389g

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:Li–O2 cells with quasi-solid state electrolytes plasticized by an ionic liquid/ether exhibit a long cycle life.

What problem does this paper attempt to address?

Ultralong-Life Quasi-Solid-State Li-O-2 Batteries Enabled by Coupling Advanced Air Electrode Design with Li Metal Anode Protection

Changtai Zhao,Jianneng Liang,Qian Sun,Jing Luo,Yulong Liu,Xiaoting Lin,Yang Zhao,Hossein Yadegari,Mohammad Norouzi Banis,Ruying Li,Huan Huang,Li Zhang,Rong Yang,Shigang Lu,Xueliang Sun

DOI: https://doi.org/10.1002/smtd.201800437

IF: 12.4

2019-01-01

Small Methods

Abstract:Development of Li-O-2 batteries with ultrahigh theoretical energy density is highly desired to meet the ever-increasing demand of energy density. However, safety concerns and cycling life have become main bottlenecks that inhibit the practical applications of Li-O-2 batteries because of the use of organic liquid electrolytes (LEs) and the noneffective air electrodes. Gel polymer electrolytes (GPEs) are reported to be used in Li-O-2 batteries and show relatively improved performance than LEs, but they are still below the expectation. Herein, a quasi-solid-state Li-O-2 battery constructed with a GPE and a high-efficiency air electrode is proposed. Excellent electrochemical performance is demonstrated beyond the batteries with LE, evidenced by the ultralong cycle life of up to 553 cycles and stable operating time for over 1100 h. The elongated cycling life benefits from the role of GPE in blocking O-2 crossover, protecting Li metal, and avoiding electrolyte evaporation compared with LE. It is expected that the present study can shed light on the future study on developing efficient catalysts for (quasi) solid-state Li-O-2 battery.
A Unique Hybrid Quasi-Solid-State Electrolyte for Li-O2 Batteries with Improved Cycle Life and Safety

Jin Yi,Haoshen Zhou

DOI: https://doi.org/10.1002/cssc.201600536

IF: 8.4

2016-09-08

ChemSusChem

Abstract:In the context of the development of electric vehicle to solve the contemporary energy and environmental issues, the possibility of pushing future application of Li-O2 batteries as a power source for electric vehicles is particularly attractive. However, safety concerns, mainly derived from the use of flammable organic liquid electrolytes, become a major bottleneck for the strategically crucial applications of Li-O2 batteries. To overcome this issue, rechargeable solid-state Li-O2 batteries with enhanced safety is regarded as an appealing candidate. In this study, a hybrid quasi-solid-state electrolyte combing a polymer electrolyte with a ceramic electrolyte is first designed and explored for Li-O2 batteries. The proposed rechargeable solid-state Li-O2 battery delivers improved cycle life (>100 cycles) and safety. The feasibility study demonstrates that the hybrid quasi-solid-state electrolytes could be employed as a promising alternative strategy for the development of rechargeable Li-O2 batteries, hence encouraging more efforts devoted to explore other hybrid solid-state electrolytes for Li-O2 batteries upon future application.
Long-life Lithium-O2 Battery Achieved by Integrating Quasi-Solid Electrolyte and Highly Active Pt3Co Nanowires Catalyst

Yi Xing,Nan Chen,Mingchuan Luo,Yingjun Sun,Yong Yang,Ji Qian,Li,Shaojun Guo,Renjie Chen,Feng Wu

DOI: https://doi.org/10.1016/j.ensm.2019.06.008

IF: 20.4

2020-01-01

Energy Storage Materials

Abstract:To achieve a long-cycle-life lithium-air battery, the catalyst, electrolyte and lithium anode should be optimized synergistically. Herein, we achieve a super-long cycle-life lithium-O-2 battery by integrating the synergistic effect of highly active Pt3Co nanowires (PtCo NWs) cathode catalyst and stable quasi-solid SiO2-ionic liquid (IL) electrolyte. The PtCo NWs can effectively reduce the charge voltage below 3.2 V, but have to induce the decomposition of the conventional liquid electrolyte. The SiO2-IL electrolyte has a high ionic conductivity, but it still cannot match with carbonaceous oxygen electrode, due to its large charge overpotential. By combining the PtCo NWs cathode catalyst with quasi-solid electrolyte, the lithium-O-2 battery can reversibly discharge and charge above 300 cycles (>3000 h). When the battery is disassembled, the lithium metal anode is preserved well, which is closely covered by a layer of SiO2 nanoparticles containing IL. By contrast, the lithium anode completely changes to the white powders for the one with ether-based electrolyte stored under the same condition, demonstrating the lithium anode is perfectly protected by the SiO2-IL electrolyte, which is a critical factor for achieving the long-life performance of lithium-O-2 battery. Even under the air atmosphere, the battery can still cycle very well.
Crown Ether Electrolyte Induced Li2O2 Amorphization for Low Polarization and Long Lifespan Li‐O2 batteries

Meng Li,Jiaxin Wu,Zichang You,Zhongqin Dai,Yuanfan Gu,Lei Shi,Meifen Wu,Zhaoyin Wen

DOI: https://doi.org/10.1002/anie.202403521

2024-04-25

Angewandte Chemie International Edition

Abstract:Lithium-oxygen batteries possess an extremely high theoretical energy density, rendering them a prime candidate for next-generation secondary batteries. However, they still face multiple problems such as huge charge polarization and poor cycle life, which lay a significant gap between laboratory research and commercial applications. In this work, we adapt 15-crown-5 ether (C15) as solvent to regulate the generation of discharge products in lithium-oxygen batteries. The coronal structure endows C15 with strong affinity to Li+, firmly stabilizes the intermediate LiO2 and discharge product Li2O2. Thus, the crystalline Li2O2 is amorphized into easily decomposable amorphous products. The lithium-oxygen batteries assembled with 0.5 M C15 electrolyte show an increased discharge capacity from 4.0 mAh cm−2 to 5.7 mAh cm−2 and a low charge overpotential of 0.88 V during the whole lifespan at 0.05 mA cm−2. The batteries with 1 M C15 electrolyte can cycle stably for 140 cycles. Furthermore, the amorphous characteristic of Li2O2 product is preserved when matched with redox mediators such as LiI, with the charge polarization further decreasing to 0.74 V over a cycle life of 190 cycles. This provides new possibilities for electrolyte design to promote Li2O2 amorphization and reduce charge overpotential in lithium-oxygen batteries.

chemistry, multidisciplinary
Designing zwitterionic bottlebrush polymers to enable long‐cycling quasi‐solid‐state lithium metal batteries

Shimei Li,Hu Hong,Dedi Li,Xinru Yang,Shixun Wang,Dechao Zhang,Qi Xiong,Zhaodong Huang,Chunyi Zhi

DOI: https://doi.org/10.1002/anie.202409500

2024-12-06

Angewandte Chemie International Edition

Abstract:Ionogel polymer electrolyte (IPE), incorporating ionic liquid (IL) within a polymer matrix, presents a promising avenue for safe solid-state lithium metal batteries. However, sluggish Li+ kinetics, resulting from the formation of [Li(anion)n]-(n-1) clusters and the occupation of Li+ transport sites by organic cations, limit their practical applications. In this study, we have developed zwitterionic bottlebrush polymers-based IPE with promoted Li+ conduction by employing poly(sulfobetaine methacrylate)-grafted poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVC-g-PSBMA) bottlebrushes as matrices of IL. The grafted zwitterionic side chains greatly facilitate the dissociation of [Li(anion)n]-(n-1) clusters to produce more movable Li+. Moreover, the positively charged −NR4+ groups in zwitterionic side chains effectively restrain anions migration, while the negatively charged −SO3− groups immobilize IL cations, preventing them from occupying Li+ hopping sites and reducing the energy barrier for Li+ migration. These synergistic effects contribute to a notable ionic conductivity (7.5×10−4 S cm−1) and lithium transference number (0.63) of PVC-g-PSBMA IPE at 25 oC. As a result, PVC-g-PSBMA IPE enables ultralong-term (over 6500 h) reversible and stable Li plating/stripping in Li||Li symmetric cells. Remarkably, the assembled Li||LiFePO4 full batteries demonstrate unprecedented cycling stability of more than 2000 cycles with a superior capacity retention of 93.7%.

chemistry, multidisciplinary
A non-Newtonian fluid quasi-solid electrolyte designed for long life and high safety Li-O2 batteries

Guangli Zheng,Tong Yan,Yifeng Hong,Xiaona Zhang,Jianying Wu,Zhenxing Liang,Zhiming Cui,Li Du,Huiyu Song

DOI: https://doi.org/10.1038/s41467-023-37998-5

IF: 16.6

2023-04-20

Nature Communications

Abstract:Abstract The Li dendrite growth and the liquid electrolyte volatilization under semi-open architecture are intrinsic issues for Li-O 2 battery. In this work, we propose a non-Newtonian fluid quasi-solid electrolyte (NNFQSE) SiO 2 -SO 3 Li/PVDF-HFP, which has both shear-thinning and shear-thickening properties. The component interactions among the sulfonated silica nanoparticles, liquid electrolyte, and polymer network are beneficial for decent Li + conductivity and high liquid electrolyte retention without volatilization. Furthermore, NNFQSE exhibits shear-thinning property to eliminate the stress of dendrite growth during repeated cycling. Meanwhile, when the force suddenly increases, such as a high current rate, the NNFQSE may dynamically turn shear-thickening to respond and mechanically stiffen to inhibit the lithium dendrite penetration. By coupling with the NNFQSE, the lithium symmetrical battery can run over 2000 h under 1 mA cm −2 at room temperature, and the quasi-solid Li-O 2 battery actualizes long life above 5000 h at 100 mA g −1 .

multidisciplinary sciences
Cellulose Acetate-Based High-Electrolyte-Uptake Gel Polymer Electrolyte for Semi-Solid-State Lithium-Oxygen Battery with Long-Cycling Stability.

Zelin Xu,Dingcheng Guo,Zhi Gu,Da Wang,Ziqiang Liu,X. Yao,Zhiyan Wang

DOI: https://doi.org/10.1002/asia.202200712

2022-08-30

Chemistry - An Asian Journal

Abstract:The lithium-oxygen battery has inspired great research interests owing to its ultrahigh theoretical energy density and has been considered as one of the promising secondary batteries. However, there are still some challenges in its practical application, like liquid organic electrolyte evaporation in the semi-open system and instability in the high-voltage oxidizing environment. In this work, a cellulose acetate-based gel polymer electrolyte (CA@GPE) is proposed, whose cross-linked microporous structure ensures the ultrahigh liquid electrolyte uptake of 2391%. The prepared CA@GPE exhibits a high lithium-ion transference number of 0.595, a satisfying ionic conductivity of 0.47 mS cm -1 and a wide electrochemical stability window up to 5.0 V. The Li//Li symmetric cell employing CA@GPE could cycle stably over 1200 h. The lithium-oxygen battery with CA@GPE presents a superb cycling lifetime of 370 cycles at 0.1 mA cm -2 under 0.25 mAh cm -2 . This work offers a possible strategy to realize long-cycling stability lithium-oxygen batteries.

Chemistry,Medicine,Engineering,Materials Science
In Situ Polymerized Quasi-Solid Electrolytes Compounded with Ionic Liquid Empowering Long-Life Cycling of 4.45 V Lithium-Metal Battery

Shuo Ma,Donghui Zhang,Zhongli Tang,Wenbin Li,Yanan Zhang,Yating Zhang,Kemeng Ji,Mingming Chen

DOI: https://doi.org/10.1021/acsami.4c00866

IF: 9.5

2024-04-12

ACS Applied Materials & Interfaces

Abstract:High-voltage resistant quasi-solid-state polymer electrolytes (QSPEs) are promising for enhancing the energy density of lithium-metal batteries in practice. However, side reactions occurring at the interfaces between the anodes or cathodes and QSPEs considerably reduce the lifespan of high-voltage LMBs. In this study, a copolymer of vinyl ethylene carbonate (VEC) and poly(ethylene glycol) diacrylate (PEGDA) was used as the framework, with a cellulose membrane (CE) as the supporting layer. Based...

materials science, multidisciplinary,nanoscience & nanotechnology
Cellulose Acetate-Based High-Electrolyte-Uptake Gel Polymer Electrolyte for Semi-Solid-State Lithium-Oxygen Batteries with Long-Cycling Stability

Zelin Xu,Dingcheng Guo,Ziqiang Liu,Zhiyan Wang,Zhi Gu,Da Wang,Xiayin Yao

DOI: https://doi.org/10.1002/asia.202200712

2022-11-02

Abstract:Lithium-oxygen batteries have received great research interest owing to their ultrahigh theoretical energy density and are considered as one of the promising secondary batteries. However, there are still some challenges in their practical application, like liquid organic electrolyte evaporation in the semi-open system and instability in the high-voltage oxidizing environment. In this work, a cellulose acetate-based gel polymer electrolyte (CA@GPE) is proposed, whose cross-linked microporous structure ensures the ultrahigh liquid electrolyte uptake of 2391%. The prepared CA@GPE exhibits a high lithium-ion transference number of 0.595, a satisfying ionic conductivity of 0.47 mS cm-1 and a wide electrochemical stability window up to 5.0 V. The Li//Li symmetric cell employing CA@GPE could cycle stably over 1200 h. The lithium-oxygen battery with CA@GPE presents a superb cycling lifetime of 370 cycles at 0.1 mA cm-2 under 0.25 mAh cm-2 . This work offers a possible strategy to realize long-cycling stability lithium-oxygen batteries.
Janus Polymer Composite Electrolytes Improve the Cycling Performance of Lithium-Oxygen Battery

Tao Li,Chengdong Wang,Junmei Cheng,Jian Guo,Ang Xiao,Hongbin Hou,Qinggang Wang,Ben Wang,Xiao Chen,Guanglei Cui

DOI: https://doi.org/10.1021/acsami.9b23395

2020-03-18

Abstract:The liquid electrolytes in lithium-air (oxygen) batteries are prone to volatilize, leak, flame, and cause uneven deposition of lithium during cycling, which makes the batteries to face serious problems in terms of safety and cycling stability. A novel Janus quasi-solid composite polymer electrolyte was fabricated by perfluorosulfonic acid (Nafion) membranes with tunable thickness and poly(vinylidene fluoride)-hexafluoropropylene (PVDF-HFP). The Nafion membranes not only guarantee the mechanical strength of the composites but also effectively prevent the migration of certain anions and macromolecules. The results indicate that Janus quasi-solid composite polymer electrolytes have excellent thermal stability, high lithium-ion migration number, and wide electrochemical window. Lithium-oxygen batteries using the novel quasi-solid composite electrolytes perform lower polarization and better cycling stability. The excellent properties of the quasi-solid composite electrolytes make it one of the effective materials for improving the cycling stability of lithium-air (oxygen) batteries.
Ultrathin Yet Robust Single Lithium‐Ion Conducting Quasi‐Solid‐State Polymer‐Brush Electrolytes Enable Ultralong‐Life and Dendrite‐Free Lithium‐Metal Batteries

Minghong Zhou,Ruliang Liu,Danyang Jia,Yin Cui,Qiantong Liu,Shaohong Liu,Dingcai Wu

DOI: https://doi.org/10.1002/adma.202100943

IF: 29.4

2021-06-02

Advanced Materials

Abstract:Quasi-solid-state polymer electrolytes are one of the most promising candidates for long-life lithium-metal batteries. However, introduction of plasticizers for high ion conductivity at room temperature inevitably gives rise to poor mechanical strength and requires a very thick electrolyte membrane, which is detrimental to safety and energy density of the batteries. Herein, inspired by tube brushes coupling hardness with softness, a novel superstructured polymer bottlebrush BC-g-PLiSTFSI-b-PEGM (BC = bacterial cellulose; PLiSTFSI = poly(lithium 4-styrenesulfonyl-(trifluoromethylsulfonyl) imide); PEGM = poly(diethylene glycol monomethyl ether methacrylate)) with a hard nanofibril backbone and soft functional polymer side-chains is reported as an effective strategy to well balance the mechanical strength and ion conductivity of quasi-solid-state polymer electrolytes. The resulting single lithium-ion conducting quasi-solid-state polymer-brush electrolytes (SLIC-QSPBEs) integrate the features of the ultrathin membrane thickness (10 µm), the nanofibril backbone-strengthened porous nanonetwork (Young's modulus = 1.9 GPa), and the high-rate single lithium-ion conducting diblock copolymer brushes. As a result, the ultrathin yet robust SLIC-QSPBEs enable ultralong-term (over 3300 h) reversible and stable lithium plating/stripping in Li/Li symmetrical cell at a current density of 1 mA cm−2 for lithium anode. This work affords a promising strategy to develop advanced electrolytes for solid-state lithium-metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Metal‐Organic Framework Confined Solvent Ionic Liquid Enables Long Cycling Life Quasi‐Solid‐State Lithium Battery in Wide Temperature Range

Zhaoen Liu,Zewei Hu,Xueao Jiang,Xiwen Wang,Zhe Li,Zhengjian Chen,Yan Zhang,Shiguo Zhang

DOI: https://doi.org/10.1002/smll.202203011

IF: 13.3

2022-08-17

Small

Abstract:A quasi‐solid‐state electrolyte based on a solvate ionic liquid space‐restricted in UIO‐66 exhibits excellent interfacial nano‐wettability, fast Li‐ion mobility, high ionic conductivity, and good compatibility with electrodes. As a result, the SIL/UIO‐66 material for quasi‐solid‐state batteries demonstrates excellent rate capability and cycle stability in a wide temperature range of 25–90 °C. Solid‐state Li batteries are receiving increasing attention as a prospective energy storage system due to the high energy density and improved safety. However, the high interfacial resistance between solid‐state electrolyte and electrode results in sluggish Li+ transport kinetics. To tackle the interfacial problem and prolong the cycle life of solid‐state Li batteries, a quasi‐solid‐state electrolyte (QSSE) based on a solvate ionic liquid (SIL) space‐restricted in nanocages of UIO‐66 (SIL/UIO‐66) is prepared in this study. Benefiting from the effective spatial confinement of the TFSI− by the pore UIO‐66 and the strong chemical interactions between the SIL and metal atoms, SIL/UIO‐66 QSSE exhibits high ionic conductivity and good compatibility with electrodes. As a result, Li|QSSE|LFP cells demonstrate excellent rate capability and cycle stability in a wide temperature range of 25–90 °C. This study provides a realistic strategy for the fabrication of safe solid electrolytes with excellent compatibility and long cycle life for high‐performance QSSE Li‐ion batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High-entropy metal oxide containing hybrid electrolyte for long-life Li-metal batteries

Mingsheng Li,Liqi Wang,Yongzheng Shi,Jikai Zhang,Qi Zhu,Jiaxiang Shang,Bin Li,Shubin Yang

DOI: https://doi.org/10.1093/oxfmat/itac011

2022-01-01

Oxford Open Materials Science

Abstract:Abstract Solid-state electrolytes are responsible for transporting lithium (Li) ions between electrodes in solid-state batteries and are essential for high-safety and high-energy Li-metal batteries. Developing novel solid-state electrolytes with high ionic conductivity and good interfacial contact is an urgent need. Here, to this end, a solid-state hybrid electrolyte is developed by mixing high-entropy Li-containing metal oxide (Lix(Mg0.2Co0.2Ni0.2Cu0.2Zn0.2)1−xO, HEOLi) matrix and poly(ethylene oxide)–Li salt binder and casting on polytetrafluoroethylene (PTFE) substrate. By virtue of the low Li-ion migration energy barrier of the HEOLi (0.36 eV) and the strong interaction between the oxygen vacancies of the HEOLi and the Li salt anions, a biphasic transport of Li ions in both inorganic and polymeric phases of the hybrid electrolyte is achieved, yielding a high ionic conductivity of 3 × 10−4 S cm−1 at 30°C. The Li/Li symmetric cells with the hybrid electrolyte show a low overpotential of 45 mV and a long cycle life of more than 2500 h. Furthermore, coupled with the LiFePO4 cathodes and metallic Li anodes, solid-state full cells with the hybrid electrolyte deliver a high capacity of 150 mAh g−1, stable cycle performance and high safety. Consequently, hybrid electrolytes based on high-entropy metal oxides have broad application prospects in solid-state electrochemical energy storage and are expected to achieve Li-metal batteries with high-safety, high-energy density and long life.
Exceptional interfacial conduction and LiF interphase for ultralong life PEO-based all-solid-state batteries

Jin Li,Yingjun Cai,Fengjie Zhang,Yingyue Cui,Wenhao Fang,Haoran Da,Haitao Zhang,Suojiang Zhang

DOI: https://doi.org/10.1016/j.nanoen.2023.108985

IF: 17.6

2023-10-15

Nano Energy

Abstract:Composite electrolytes, with large ionic conductivity and stable seamless interfaces, are recognized as potential ones for solid-state batteries (SSBs). Herein, a flexible all-solid-state composite electrolyte composed of TiO 2 (Bronze) nanotubes and poly(ethylene oxide) was synthesized. The composite electrolyte was found to be able to offer an exceptional interfacial conduction and a reasonable electrode compatibility in the SSBs. The interfacial phase between TiO 2 (B) and polymer formed a new lithium-ion transport pathway, which enhanced the interfacial conduction. Moreover, DFT and MD simulation showed that TiO 2 (B) can promote the dissociation of lithium salts and produce more free lithium ions, thereby enhancing the ionic conductivity. Furthermore, the incorporations of TiO 2 (B) can achieve a rich LiF interphase layer, realizing a rapid lithium-ion transport and uniform Li deposition, as was revealed by the results of TOF-SIMS, Cryo-TEM, and COMSOL Multiphysics. Consequently, the symmetric lithium cell obtained an excellent electrochemical performance of more than 2350 h and a high critical current density of 1.6 mA cm -2 . The as-prepared LiFePO 4 /Li SSBs exhibited an impressive ultralong cycle lifespan of over 3100 cycles at 1 C. This work is regarded as opening a new avenue for designing reasonably the ultralong life of PEO-based SSBs.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Organic-Organic Composite Electrolyte Enables Ultralong Cycle Life in Solid-State Lithium Metal Batteries

Chuanjiao Xue,Xue Zhang,Shuo Wang,Liangliang Li,Ce-Wen Nan

DOI: https://doi.org/10.1021/acsami.0c05643

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Ionic conducting polymer electrolytes for solid-state lithium-ion batteries have attracted ever-increasing attention because of their decent ionic conductivity, flexibility, no liquid leakage, and good processability. Poly(vinylidene fluoride) (PVDF)-based polymer electrolytes have recently stood out among the polymer electrolytes due to their high room temperature ionic conductivity. However, the interface between PVDF-based polymer electrolytes and lithium metal decays over time until the batteries break down. Here, we introduce a small amount of poly(acrylic acid) (PAA) into a PVDF-based polymer electrolyte and synthesize an organic-organic composite electrolyte that alleviates the interfacial reaction with lithium metal, which shows great superiority over other modification methods such as coating. The cycle life of lithium symmetric cells is prolonged from 130 to 850 h at 0.44 mA cm(-2) due to the effective suppression of interfacial reaction. The much more stable interface also enables excellent cycle performance in a solid-state LiCoO2 parallel to Li cell at 30 degrees C with a capacity decay of 0.03% per cycle for 1000 cycles, which is much lower than that of a cell without blending PAA (0.13% per cycle for only 450 cycles). The results would shed light on the applications of PVDF-based polymer electrolytes in solid-state lithium metal batteries.
A lithium–oxygen battery with a long cycle life in an air-like atmosphere

Mohammad Asadi,Baharak Sayahpour,Pedram Abbasi,Anh T. Ngo,Klas Karis,Jacob R. Jokisaari,Cong Liu,Badri Narayanan,Marc Gerard,Poya Yasaei,Xuan Hu,Arijita Mukherjee,Kah Chun Lau,Rajeev S. Assary,Fatemeh Khalili-Araghi,Robert F. Klie,Larry A. Curtiss,Amin Salehi-Khojin

DOI: https://doi.org/10.1038/nature25984

IF: 64.8

2018-03-01

Nature

Abstract:A lithium–oxygen battery, comprising a lithium carbonate-based protected anode, a molybdenum disulfide cathode and an ionic liquid/dimethyl sulfoxide electrolyte, operates in a simulated air atmosphere with a long cycle life of up to 700 cycles.

multidisciplinary sciences
Oxygen- and Dendrite-Resistant Ultra-Dry Polymer Electrolytes for Solid-State Li–O2 Batteries

Wei Yu,Chuanjiao Xue,Bingkun Hu,Bingqing Xu,Liangliang Li,Ce-Wen Nan

DOI: https://doi.org/10.1016/j.ensm.2020.02.001

IF: 20.4

2020-01-01

Energy Storage Materials

Abstract:Utilizing polymer electrolytes in Li-O-2 batteries could effectively solve safety issues caused by flammable liquid electrolytes. However, the effect of polymer matrixes and additional liquid electrolytes on the cycle performance of Li-O-2 batteries is still not clear. Herein, free-standing, Li-ion conducting ultra-dry polymer electrolytes (UDPEs) without additional liquid electrolytes are synthesized by a simple tape-casting and vacuum-drying method. The long-term cycle performance (over 800 h) of the UDPE-based symmetric Li-Li cells in O-2 atmosphere demonstrates that the UDPEs significantly resist O-2 crossover and Li dendrite penetration. Moreover, side reactions caused by the degradation of liquid electrolytes can be alleviated and a stable LiF-containing solid electrolyte interface is formed between the UDPEs and Li metal. Meanwhile, the cycle life of the UDPE-based catalyst-free Li-O-2 batteries under a high current density of 0.4 mA cm(-2) is improved by more than twofold in comparison with that of the liquid electrolyte-based Li-O-2 batteries. The replacement of liquid electrolytes by UDPEs does not change the fundamental reaction of the solid-state Li-O-2 batteries, which is still the formation and decomposition of typical Li2O2 crystals. The outstanding comprehensive performance of UDPEs may trigger further studies towards multifunctional polymer electrolytes in Li-O-2 batteries and even other alkali metal-based O-2 (air) batteries.
A family of oxychloride amorphous solid electrolytes for long-cycling all-solid-state lithium batteries

Shumin Zhang,Feipeng Zhao,Jiatang Chen,Jiamin Fu,Jing Luo,Sandamini H. Alahakoon,Lo-Yueh Chang,Renfei Feng,Mohsen Shakouri,Jianwen Liang,Yang Zhao,Xiaona Li,Le He,Yining Huang,Tsun-Kong Sham,Xueliang Sun

DOI: https://doi.org/10.1038/s41467-023-39197-8

IF: 16.6

2023-06-24

Nature Communications

Abstract:Abstract Solid electrolyte is vital to ensure all-solid-state batteries with improved safety, long cyclability, and feasibility at different temperatures. Herein, we report a new family of amorphous solid electrolytes, xLi 2 O-MCl y (M = Ta or Hf, 0.8 ≤ x ≤ 2, y = 5 or 4). xLi 2 O-MCl y amorphous solid electrolytes can achieve desirable ionic conductivities up to 6.6 × 10 −3 S cm −1 at 25 °C, which is one of the highest values among all the reported amorphous solid electrolytes and comparable to those of the popular crystalline ones. The mixed-anion structural models of xLi 2 O-MCl y amorphous SEs are well established and correlated to the ionic conductivities. It is found that the oxygen-jointed anion networks with abundant terminal chlorines in xLi 2 O-MCl y amorphous solid electrolytes play an important role for the fast Li-ion conduction. More importantly, all-solid-state batteries using the amorphous solid electrolytes show excellent electrochemical performance at both 25 °C and −10 °C. Long cycle life (more than 2400 times of charging and discharging) can be achieved for all-solid-state batteries using the xLi 2 O-TaCl 5 amorphous solid electrolyte at 400 mA g −1 , demonstrating vast application prospects of the oxychloride amorphous solid electrolytes.

multidisciplinary sciences
Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

Peng Liu,Lei Zhong,Shuanjin Wang,Sheng Huang,Dongmei Han,Zhiheng Huang,Min Xiao,Yuezhong Meng

DOI: https://doi.org/10.1016/j.ensm.2023.03.012

IF: 20.4

2023-03-13

Energy Storage Materials

Abstract:The excessive consumption of organic solvent and enhancement of environmental protection protocols necessitate the exploitation of desirable approach to handle our solid-state electrolytes. Herein, we report an all solvent-free method for the preparation of low-cost, recyclability, flexible, ultrathin, and high ionic conductivity quasi-solid polymer electrolytes (QPE) membrane, which is an 5-μm-thick PE separators filled with polyether-block-polyamide (PEO-b-PA 6 )/LiTFSI/tetraethylene glycol dimethyl ether (TEGDME) (PPLT) that can be used as a safe lithium metal batteries. The self-fusion characteristics of the PEO-b-PA 6 with supramolecular hydrogen bonds guarantees the intimate and perfect interfaces even during extreme deformations and crack of the solvent-free machining process. The ultrathin PE separators is mechanically strong, preventing batteries from short-circuiting even after more than 1200 h of cycling, and the ionic conductivity of PPLT reaches up to 1.02*10 −4 S cm −1 at 30 °C by adding only 25 wt % of TEGDME as plasticizer. The LFP//Li cells using PPLT as electrolyte exhibits excellent reversible capacity of 116 mAh g −1 at 1 C after 700 cycles at 28°C. In addition, the polymer soft-pack batteries using PPLT achieve highly reversible capacity of 124.9 mAh g −1 after 200 cycles at 0.2 C. It is noted that this solvent-free film-making process and outstanding electrochemical performance of this QPE could be further delivered to other room temperature rechargeable solid-state lithium metal batteries and enlighten safe, low-carbon green and high-energy solid-state batteries.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries

Meng Wang,Hu Zhang,Yewen Li,Ruiping Liu,Huai Yang

DOI: https://doi.org/10.1016/j.jechem.2024.02.069

IF: 13.1

2024-01-01

Journal of Energy Chemistry

Abstract:Solid polymer electrolytes (SPEs) have emerged as one of the most promising candidates for the construction of solid-state lithium batteries due to their excellent flexibility, scalability, and interface compatibility with electrodes. Herein, a novel all-solid polymer electrolyte (PPLCE) was fabricated by the copolymer network of liquid crystalline monomers and poly(ethylene glycol) dimethacrylate (PEGDMA) acts as a structural frame, combined with poly(ethylene glycol) diglycidyl ether short chain interspersed serving as mobile ion transport entities. The preparaed PPLCEs exhibit excellent mechanical property and outstanding electrochemical performances, which is attributed to their unique three-dimensional co-continuous structure, characterized by a cross-linked semi-interpenetrating network and an ionic liquid phase, resulting in a distinctive nanostructure with short-range order and long-range disorder. Remarkably, the addition of PEGDMA is proved to be critical to the comprehensive performance of the PPLCEs, which effectively modulates the microscopic morphology of polymer networks and improves the mechanical properties as well as cycling stability of the solid electrolyte. When used in a lithium-ion symmetrical battery configuration, the 6 wt%-PPLCE exhibited super stability, sustaining operation for over 2000 h at 30 °C, with minimal and consistent overpotential of 50 mV. The resulting Li|PPLCE|LFP solid-state battery demonstrated high discharge specific capacities of 160.9 mA h g-1 and 120.1 mA h g-1 at current densities of 0.2 C and 1 C, respectively. Even after more than 300 cycles at a current density of 0.2 C, it retained an impressive 73.5% capacity. Moreover, it displayed stable cycling for over 180 cycles at a high current density of 0.5 C. The super cycle stability may promote the application for ultralong-life all solid-state lithium metal batteries.

Ionic Liquid/ether-Plasticized Quasi-Solid-state Electrolytes for Long-Life Lithium–oxygen Cells

Ultralong-Life Quasi-Solid-State Li-O-2 Batteries Enabled by Coupling Advanced Air Electrode Design with Li Metal Anode Protection

A Unique Hybrid Quasi-Solid-State Electrolyte for Li-O2 Batteries with Improved Cycle Life and Safety

Long-life Lithium-O2 Battery Achieved by Integrating Quasi-Solid Electrolyte and Highly Active Pt3Co Nanowires Catalyst

Crown Ether Electrolyte Induced Li2O2 Amorphization for Low Polarization and Long Lifespan Li‐O2 batteries

Designing zwitterionic bottlebrush polymers to enable long‐cycling quasi‐solid‐state lithium metal batteries

A non-Newtonian fluid quasi-solid electrolyte designed for long life and high safety Li-O2 batteries

Cellulose Acetate-Based High-Electrolyte-Uptake Gel Polymer Electrolyte for Semi-Solid-State Lithium-Oxygen Battery with Long-Cycling Stability.

In Situ Polymerized Quasi-Solid Electrolytes Compounded with Ionic Liquid Empowering Long-Life Cycling of 4.45 V Lithium-Metal Battery

Cellulose Acetate-Based High-Electrolyte-Uptake Gel Polymer Electrolyte for Semi-Solid-State Lithium-Oxygen Batteries with Long-Cycling Stability

Janus Polymer Composite Electrolytes Improve the Cycling Performance of Lithium-Oxygen Battery

Ultrathin Yet Robust Single Lithium‐Ion Conducting Quasi‐Solid‐State Polymer‐Brush Electrolytes Enable Ultralong‐Life and Dendrite‐Free Lithium‐Metal Batteries

Metal‐Organic Framework Confined Solvent Ionic Liquid Enables Long Cycling Life Quasi‐Solid‐State Lithium Battery in Wide Temperature Range

High-entropy metal oxide containing hybrid electrolyte for long-life Li-metal batteries

Exceptional interfacial conduction and LiF interphase for ultralong life PEO-based all-solid-state batteries

Organic-Organic Composite Electrolyte Enables Ultralong Cycle Life in Solid-State Lithium Metal Batteries

A lithium–oxygen battery with a long cycle life in an air-like atmosphere

Oxygen- and Dendrite-Resistant Ultra-Dry Polymer Electrolytes for Solid-State Li–O2 Batteries

A family of oxychloride amorphous solid electrolytes for long-cycling all-solid-state lithium batteries

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries