Abstract:Conventional dual-ion conductive gel polymer electrolytes (GPEs) attracted tremendous interest for their combined advantages of liquid and solid electrolytes. However, their cycling performance usually degrades due to the concentration polarization of anions. Single lithium ion gel polymer electrolytes (SLIGPEs), which have anions covalently bonded to the polymer or inorganic backbone, can suppress the motion of anions by the interactions between the pedant anions and mobile ions. Especially, Li+ deposition in SLIGPEs can be regulated uniformly to avoid lithium dendrite growth. Herein, novel 3D-structured SLIGPEs were prepared by in-situ crosslinking of lithium (4-styrenesulfonyl) (trifluoromethanesulfonyl) imide (LiSTFSI) with polyethylene glycol dimethacrylate (PEGDMA), soaked with liquid electrolyte. The obtained SLIGPEs not only promote the absorption of liquid electrolyte and accelerate the transport of Li+, but also show a high limitation for the migration of anions, proved by high ionic conductivity (2.74 × 10−5 S cm−1 at room temperature) and high lithium ion transference number (0.622) of SLIGPE-3.5, respectively. The long cycle life (cycling for over 600 h under 0.05 mA cm−2 and 0.1 mA cm−2) of symmetric lithium batteries with SLIGPEs as both separator and electrolyte exhibits good interfacial stability between SLIGPEs and electrodes. Meanwhile, LiFePO4/SLIGPE-2/Li shows a specific discharge capacity of 132.1 mAh g−1 at 0.1 C, 80.0% of the capacity retention ratio and 99.0% of the coulombic efficiency after 150 cycles at room temperature. Moreover, confirmed by SEM, lithium dendrite growth is significantly suppressed during repeated Li plating/stripping cycles. Density functional theory calculations (DFT) confirm the mutual interactions between STFSI− pendants and ions in electrolytes and that between PEO segments and ions. We believe that these in-situ SLIGPEs with superior performances have great potential for the application in lithium metal batteries.

Ultrathin Yet Robust Single Lithium‐Ion Conducting Quasi‐Solid‐State Polymer‐Brush Electrolytes Enable Ultralong‐Life and Dendrite‐Free Lithium‐Metal Batteries

A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries

Designing zwitterionic bottlebrush polymers to enable long‐cycling quasi‐solid‐state lithium metal batteries

In Situ Construction a Stable Protective Layer in Polymer Electrolyte for Ultralong Lifespan Solid‐State Lithium Metal Batteries

Hyperbranched PCL/PS Copolymer-Based Solid Polymer Electrolytes Enable Long Cycle Life of Lithium Metal Batteries

10 μm‐Thick High‐Strength Solid Polymer Electrolytes with Excellent Interface Compatibility for Flexible All‐Solid‐State Lithium‐Metal Batteries

In situ formed self-healable quasi-solid hybrid electrolyte network coupled with eutectic mixture towards ultra-long cycle life lithium metal batteries

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

Molecular brush-based ultrathin polymer electrolytes with stable interfaces for high-voltage large-areal-capacity lithium metal batteries

Regulating Micro‐phase Structure in Plastic Crystal Gel Polymer Electrolyte for Quasi‐Solid‐State Lithium Metal Batteries

Heterogeneous Nanodomain Electrolytes for Ultra‐Long‐Life All‐Solid‐State Lithium‐Metal Batteries

An All-in-one Free-Standing Single-Ion Conducting Semi-Solid Polymer Electrolyte for High-Performance Practical Li Metal Batteries

Hybrid poly-ether/carbonate ester electrolyte engineering enables high oxidative stability for quasi-solid-state lithium metal batteries

Sandwich‐Structured Quasi‐Solid Polymer Electrolyte Enables High‐Capacity, Long‐Cycling, and Dendrite‐Free Lithium Metal Battery at Room Temperature

In-situ crosslinked single ion gel polymer electrolyte with superior performances for lithium metal batteries

In Situ Orthogonal Polymerization for Constructing Fast-Charging and Long-Lifespan Li Metal Batteries with Topological Copolymer Electrolytes

In-Situ Synthesized Gel Polymer Electrolyte Enable High Capacity and Long-Cycle-Life Lithium Metal Batteries

Thiol‐Branched Solid Polymer Electrolyte Featuring High Strength, Toughness, and Lithium Ionic Conductivity for Lithium‐Metal Batteries

Engineering Molecule‐Designed In Situ Polymerization on Al‐Doped Molecular‐Sieve Framework Enables Robust Quasi‐Solid‐State Lithium Batteries

A Locally Solvent-Tethered Polymer Electrolyte for Long-Life Lithium Metal Batteries