Abstract:Ni-Fe-Ti ternary alloys, as a type of structural and magnetic material, have received more attention in the industrial fields in recent decades. For the purpose of providing necessary experimental data and theoretical basis for industrial appliance of these alloys, the researches of rapid solidification mechanism and relevant application performances of Ni45Fe40Ti15 ternary alloy are carried out in this paper. Rapid solidification of undercooled Ni45Fe40Ti15 ternary alloy is realized in a 3 m drop tube under the condition of containerless and microgravity state. In an experiment, the sample with a mass of 2 g is placed in a φ16 mm×150 mm quartz tube with a 0.3-mm-diameter nozzle at its bottom. The quartz tube is then installed in the induction coil on the top of the drop tube. The tube body is evacuated to a pressure of 2×10-5 Pa and backfilled with the mixture gas of Ar and He gases to about 1×105 Pa. After that the sample is melted by induction heating and superheated to about 200 K above its liquidus temperature. Under such a condition, the melt is ejected through the nozzle by a flow of Ar gas and dispersed into fine liquid droplets. These liquid droplets solidify rapidly during free fall, and the droplets with the diameters ranging from 160 to 1050 μm are achieved. As droplet diameter decreases, both cooling rate and undercooling of the alloy droplet increase exponentially, i.e., from 1.10×103 to 3.87×104 K·-1 and from 42 to 210 K (0.14TL) respectively. The microstructure consists of γ -(Fe, Ni) solid solution and interdendritic Fe2Ti intermetallic compound. As undercooling increases, the coarse γ -(Fe, Ni) dendrites become refined, the secondary dendrite arm spacing linearly decreases. Compared with the result in the glass fluxing experiment, the dendrites are much refined by drop tube processing due to the higher cooling rate obtained. The amounts of solute Ni and Ti content in the γ -(Fe, Ni) phase enlarge evidently with the increase of undercooling, suggesting the occurrence of solute trapping. The magnetic properties of thealloy droplets sre also analyzed. When droplet diameter decreases from 1100 to 300 μm, the saturation magnetization increases from 22.47 to 41.82 Am2·kg-1, the coercive force decreases from 3.33 to 0.80 KAm-1, and the squareness ratio decreases approximately by four times. This indicates that the soft magnetic properties of the alloy are improved remarkably by drop tube processing. Furthermore, the mechanism for substantial effect of undercooling on magnetic parameter such as coercive force needs to be further investigated.

Amorphous nickel nanophases inducing ferromagnetism in equiatomic Ni–Ti alloy

Nanostructures of Ni and NiCo Amorphous Alloys Synthesized by a Double Composite Template Approach

Composition-Dependent Assembly and Magnetic Specificity of (fe1−xnix)0.5pt0.5 Amorphous Nanothreads Through Substitution of Ni for Fe in an FePt System

Positive Microemulsion Synthesis and Magnetic Property of Amorphous Multicomponent Co-, Ni- and Cu-based Alloy Nanoparticles

Rapid Solidification Mechanism and Magnetic Properties of Ni-Fe-Ti Alloy Prepared in Drop Tube

Nanostructure and compositional segregation of soft magnetic FeNi‐based nanocomposites with multiple nanocrystalline phases

Magnetic and Microstructural Properties of Nanostructured/Amorphous NiTi Prepared by Mechanical Alloying

Massive transformation in FeNi nanopowders with nanotwin-assisted nitridation

The Facile Synthesis, Crystallization Behavior and Magnetic Property of FeNiP Amorphous Nanoparticles

Evidence Against Astrophysical Dyadospheres

Engineering medium-range order and polyamorphism in a nanostructured amorphous alloy

Magnetic Properties of Nickel-Titanium Alloy during Martensitic Transformations under Plastic and Elastic Deformation

The Non-Isothermal and Isothermal Crystallization Behavior and Mechanism of Fe-Ni Alloys

Structural Transitions and Magnetic Properties of Ni50mn36.7in13.3 Particles with Amorphous-Like Phase

$\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ Alloy Nanoparticles Encapsulated inside Carbon Nanotubes: Controlled Synthesis, Structure and Magnetic Properties

Atomic Scale Understanding the Periodic Modulation in Ferroelastic Alloy Ni-Mn-Ti

Facile Preparation and Magnetic Study of Amorphous Tm-Fe-Co-Ni-Mn Multicomponent Alloy Nanofilm

Synthesis of High-Thermally Stable Ni60Nb13.3Zr13.3Ti13.3 Amorphous Alloy by Mechanical Alloying

Preparation of Nickel-Based Amorphous-Alloys with Finely Dispersed Lead and Lead Bismuth Particles and Their Superconducting Properties

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

New Amorphous Al-Ni-Fe And Al-Ni-Co Alloys