Abstract:This study involves the introduction of lanthanum oxide into bismuth sodium potassium titanate, alongside strontium titanate, denoted by the La2O3-doped BNKT-ST samples with varied x values ranging from 0.000 to 0.030 mol % prepared by conventional solid-state reaction technique. The research comprehensively investigates the impact of lanthanum incorporation on the phase evolution, dielectric properties, scanning electron microscopy with energy-dispersive X-ray spectroscopy (EDAX), ferroelectric behavior, piezoelectric response, and energy storage density of the Bi0.5(Na0.84K0.16)0.5TiO3-SrTiO3 (BNKT-BST) ceramics. Powder X-ray diffraction analysis reveals a tetragonal phase structure in all ceramics. Scanning Electron Microscopy (SEM) is employed for surface morphology analysis, indicating that higher concentrations of lanthanum result in reduced grain sizes. The ceramic material demonstrates remarkable P-E hysteresis loops, featuring a prominent peak at an electric field intensity of 3 kV/cm. The trends in residual polarization (Pr) and coercive field (Ec) show ascending, descending, and subsequent ascending patterns with increasing lanthanum concentration. Dielectric measurement was carried out for different composition at various temperatures. The maximum dielectric constant (εr) ∼ 4553 was observed at 348 °C. The sample was poled at a voltage of 3-5 kV. Notably, at a La doping level of 0.020 mol%, the doped samples exhibit favorable performance, as evidenced by the highest piezoelectric coefficient (d33) of 121 pC/N observed in the poled samples. The 0.97BNKT-0.030ST ceramics showcase exceptional energy storage capacity, marked by an elevated energy storage density (W) of 0.26 J/cm3 and a notable energy storage efficiency of 58 %. This study suggests the promising application potential of lanthanum-doped BNKT-ST ceramic capacitors, which are lead-free and exhibit high power density energy storage. Consequently, the BNKT-ST ceramic material emerges as a prospective candidate for further development in actuator and energy storage applications.

Enhanced Piezoelectricity and Energy Storage Performances of Fe-doped BNT–BKT–ST Thin Films

The energy-storage performance and dielectric properties of (0.94-x)BNT-0.06BT-xST thin films prepared by sol–gel method

Enhanced low electric-field energy-storage performance in Ba0.9Sr0.1TiO3-Bi(Mg1/2Ti1/2)O-3 ceramics

Enhanced Piezoresponse and Dielectric Properties for Ba1-XSrXTiO3 Composition Ultrathin Films by the High-Throughput Method

Enhanced dielectric and piezoelectric properties of Mn doped (Bi 0.5Na0.5)TiO3-(Bi0.5K 0.5)TiO3-SrTiO3 thin films

Large energy-storage density with good dielectric property in bismuth sodium titanate-based thin films

Enhanced Dielectric and Piezoelectric Properties in Lead-Free Bi0.5Na0.5TiO3–BaTiO3–SrTiO3 Thin Films with Seed Layer

High Recoverable Energy Storage Density and Large Piezoelectric Response in (Bi0.5na0.5)tio3-Pbtio3 Thin Films Prepared by A Sol-Gel Method

Enhanced comprehensive energy storage properties in Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramics under a moderate electric field

Ferroelectric and piezoelectric properties of La-modified lead-free (Bi0.5Na0.5)TiO3–(Bi0.5K0.5)TiO3–SrTiO3 thin films

Enhancement of Piezoelectric and Ferroelectric Performances in (na0.85k0.15)0.5bi0.5tio3 Films with BaTiO3 Interlayers

Boosting energy storage performance in Na0.5Bi0.5TiO3-based lead-free ceramics modified by a synergistic design

High electrostrictive properties and energy storage performances with excellent thermal stability in Nb-doped Bi0.5Na0.5TiO3-based ceramics

Preparation and study of La-doped bismuth sodium potassium titanate -strontium titanate piezoelectric ceramics to enhance energy storage properties

Thickness Dependent Dielectric and Piezoelectric Properties of BNT–BT–ST Thin Films

Study on physical, electrical, magnetic and energy harvesting performances of eco-friendly piezoelectric ceramics (1 − x)[0.995BNKT–0.005LN]–xFe2O3 complex system

Structural modification and piezoelectric properties in Bi 0.5 Na 0.5 TiO 3 –BaTiO 3 –SrTiO 3 thin films

Comprehensive Optimization of Piezoelectric Coefficient and Depolarization Temperature in Mn-doped Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 Lead-Free Piezoceramics

Textured Bi1/2Na1/2TiO3‐BaTiO3 Lead‐Free Films with Enhanced Piezoelectric Property and Depolarization Temperature

Large piezoelectric properties of (1 − x)Na 0.5 Bi 0.5 TiO 3 –xBaTiO 3 thin films prepared by sol–gel method

Structural, Dielectric and Piezoelectric Properties of (bi0.5na0.5)tio3–(bi0.5k0.5)tio3–bi(zn0.5ti0.5)o3 Thin Films Prepared by Sol–gel Method