A New Copolymer Based on a D–π–A or D–A–π Repeat Unit for Polymer Solar Cells Employing Non-Halogenated Solvents

Yue Xin,Guang Zeng,Jidong Zhang,Xiaoli Zhao,Xiaoniu Yang

DOI: https://doi.org/10.1039/c8ta02915f

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:A new copolymer based on a D–π–A/D–A–π repeat unit was designed to improve solubility and device performance in non-halogenated solvents.

What problem does this paper attempt to address?

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

congwu ge,chongyu mei,jun ling,jintu wang,fugang zhao,long liang,hongjiao li,yongshu xie,weishi li

DOI: https://doi.org/10.1002/pola.27108

2014-01-01

Abstract:Donor-acceptor (D-A) conjugated copolymers are one of known classes of organic optoelectronic materials and have been well developed. However, less attention has been paid on acceptor-acceptor (A-A) conjugated analogs. In this work, two types of A-A conjugated copolymers, namely P1-Cn and P2-Cn (n is the carbon number of their alkyl side chains), were designed and synthesized based on perylenediimide (PDI) and 2,1,3-benzothiadiazole (BT). Different from P1-Cn, P2-Cn polymers have additional acetylene -spacers between PDI and BT and thus hold a more planar backbone configuration. Property studies revealed that P2-Cn polymers possess a much red-extended UV-vis absorption spectrum, stronger - interchain interactions, and one-order larger electron mobility in their neat film state than P1-Cn. However, all-polymer solar cells using P1-Cn as acceptor component and poly(3-hexyl thiophene) or poly(2,7-(9,9-didodecyl-fluoene)-alt-5,5-(4,7-dithienyl-2-yl-2,1,3-benzothiadiazole) as donor component exhibited much better performance than those based on P2-Cn. Apart from their backbone chemical structure, the side chains were found to have little influence on the photophysical, electrochemical, and photovoltaic properties for both P1-Cn and P2-Cn polymers. (c) 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014, 52, 1200-1215
A-A Strategy Enables Desirable Performance of All-Polymer Solar Cells Fabricated with Nonhalogenated Solvents

Jiaxun Peng,Ke Wang,Mengjie Li,Zeyan Peng,Hailu Liu,Meihua Huang,Bin Zhao

DOI: https://doi.org/10.1021/acsami.3c10506

IF: 9.5

2023-10-05

ACS Applied Materials & Interfaces

Abstract:Most polymer acceptors have been designed by applying a D (electron-rich unit)-A (electron-deficient unit) strategy, which are principally processed with halogenated solvents to fabricate all-polymer solar cells (all-PSCs). Two novel polymer acceptors, containing an A-A type backbone, were designed and synthesized, which can be readily dissolved in o-xylene. The polymer PY-FBTA, comprising a Y6 derivative as the first A unit and a benzotriazole derivative as the second A unit, shows smaller...

materials science, multidisciplinary,nanoscience & nanotechnology
An Alternating D–A1–D–A2 Copolymer Containing Two Electron-Deficient Moieties for Efficient Polymer Solar Cells

Wenjun Sun,Zaifei Ma,Dongfeng Dang,Weiguo Zhu,Mats R. Andersson,Fengling Zhang,Ergang Wang

DOI: https://doi.org/10.1039/c3ta12321a

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:Unlike normal donor-acceptor (D-A) polymers containing only one electron-deficient segment in their repeating unit, the incorporation of two electron-deficient moieties with different absorption behaviors, forming a D-A(1)-D-A(2) internal structure in the alternating copolymer, showed a broader absorption spectrum than its constituent parts and enhanced photovoltaic performance. This work is anticipated to open the door to the design of new low bandgap polymers with a broader absorption range for efficient polymer solar cells.
Low Band‐gap D–A Conjugated Copolymers Based on Anthradithiophene and Diketopyrrolopyrrole for Polymer Solar Cells and Field‐effect Transistors

Jun Huang,Yongxiang Zhu,Lianjie Zhang,Ping Cai,Xiaofeng Xu,Junwu Chen,Yong Cao

DOI: https://doi.org/10.1002/pola.27163

2014-01-01

Abstract:ABSTRACTTwo conjugated copolymers PADT‐DPP and PADT‐FDPP based on anthradithiophene and diketopyrrolopyrrole, with thiophene and furan as the π‐conjugated bridge, respectively, were successfully synthesized and characterized. The number‐averaged molecular weights of the two polymers are 38.7 and 30.2 kg/mol, respectively. Polymers PADT‐DPP and PADT‐FDPP exhibit broad absorption bands and their optical band gaps are 1.44 and 1.50 eV, respectively. The highest occupied molecular orbital energy level of PADT‐DPP is located at −5.03 eV while that of PADT‐FDPP is at −5.16 eV. In field‐effect transistors, PADT‐DPP and PADT‐FDPP displayed hole mobilities of 4.7 × 10−3 and 2.7 × 10−3 cm2/(V s), respectively. In polymer solar cells, PADT‐DPP and PADT‐FDPP showed power conversion efficiency (PCE) of 3.44% and 0.29%, respectively. Atomic force microscopy revealed that the poor efficiency of PADT‐FDPP should be related to the large two‐phase separation in its active layer. If 1,8‐diiodooctane (DIO) was used as the solvent additive, the PCE of PADT‐DPP remained almost unchanged due to very limited morphology variation. However, the addition of DIO could remarkably elevate the PCE of PADT‐FDPP to 2.62% because of the greatly improved morphology. Our results suggest that the anthradithiophene as an electron‐donating polycyclic system is useful to construct new D–A alternating copolymers for efficient polymer solar cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014, 52, 1652–1661
Development of New Conjugated Polymers with Donor-Pi-Bridge-Acceptor Side Chains for High Performance Solar Cells

Fei Huang,Kung-Shih Chen,Hin-Lap Yip,Steven K. Hau,Orb Acton,Yong Zhang,Jingdong Luo,Alex K. -Y. Jen

DOI: https://doi.org/10.1021/ja9066139

IF: 15

2009-01-01

Journal of the American Chemical Society

Abstract:Two new conjugated polymers have been designed and synthesized for polymer solar cells. Both of them exhibit excellent photovoltaic properties with a power conversion efficiency as high as 4.74%. Different from the traditional linear donor-acceptor (D-A) type conjugated polymers, these newly designed polymers have a two-dimensional conjugated structure with their tunable acceptors located at the end of D-A side chains and connected with the donors on the main chain through an efficient in-bridge. This approach provides great flexibility in fine-tuning the absorption spectra and energy levels of the resultant polymers for achieving high device performance.
Fluorine Substitution Enhanced Photovoltaic Performance of A D-A(1)-D-A(2) Copolymer

Dongfeng Dang,Weichao Chen,Renqiang Yang,Weiguo Zhu,Wendimagegn Mammo,Ergang Wang

DOI: https://doi.org/10.1039/c3cc44931a

IF: 4.9

2013-01-01

Chemical Communications

Abstract:A new alternating donor-acceptor (D-A(1)-D-A(2)) copolymer containing two electron-deficient moieties, isoindigo and quinoxaline, was synthesized. The photovoltaic performance of this polymer could be improved by incorporating fluorine atoms into the quinoxaline units, resulting in an efficiency of 6.32%. This result highlights the attractive promise of D-A(1)-D-A(2) copolymers for high-performance bulk heterojunction solar cells.
Low Band Gap Polymers Incorporating a Dicarboxylic Imide-Derived Acceptor Moiety for Efficient Polymer Solar Cells.

Lixin Wang,Dongdong Cai,Qingdong Zheng,Changquan Tang,Shan-Ci Chen,Zhigang Yin

DOI: https://doi.org/10.1021/mz400185k

IF: 5.8

2013-01-01

ACS Macro Letters

Abstract:Two novel copolymers incorporating N-alkyl-4,7-di(thien-2-yl)-2,1,3-benzothiadiazole-5,6-dicarboxylic imide (DI) and benzo[1,2-b:4,5-b']dithiophene (BDT) units have been designed, synthesized, and characterized. By the incorporation of the DI unit, both polymers show a bathochromically shifted absorption with a deep lying highest occupied molecular orbital (HOMO) energy level. The polymer based on thienyl group substituted BDT exhibits an intense absorption in the longer-wavelength region, a deeper lying HOMO energy level, and a higher carrier mobility, all of which contribute to the resulting polymer solar cells with a higher power conversion efficiency (PCE) of 5.19% and an increased Voc of 0.91 V.
Rational Design Dithieno[3,2‐f:2′,3′‐h]quinoxaline‐Based Polymers with Optimized Molecular Configuration and Charge Transfer for High‐Performance All‐Polymer Solar Cells

Xiao Kang,Xin Jing,Jianxiao Wang,Hongxiang Li,Mingliang Sun,Xichang Bao

DOI: https://doi.org/10.1002/cssc.202401725

IF: 8.4

2024-10-11

ChemSusChem

Abstract:Due to poor planarity and weak intermolecular interactions of acceptor units which have two‐dimensional configuration, the development of related polymers is slow. In this work, we synthesized a dithieno[3,2‐f:2',3'‐h]quinoxaline‐based unit substituted with fluorinated thiophene, which can effectively expand the area of the acceptor unit. Then, it paired with three different benzodithiophene‐based donor units, and three new polymers of PQTF‐BT, PQTF‐BTCl and PQTF‐DTCl were obtained. PQTF‐BT with thiophene side chain exhibits appropriate aggregation and crystallization performance, and the PQTF‐BT:PY‐IT all‐polymer solar cells exhibit high device efficiency of 15.54%. Meanwhile, PQTF‐BTCl with chlorination strategy on thiophene side chain further enhances the open‐circuit voltage of related devices. However, it has negative impact on the miscibility and charge transfer of the material, leading to a poor efficiency of 8.71% in the PQTF‐BTCl:PY‐IT device. To reinforce miscibility, PQTF‐DTCl with expanded backbone planarity was further studied. However, the big dihedral angles of the donor side chains disrupted the effective stacking of the molecules, resulting in great recovery of device performance to 13.42%. This work provides research ideas for the design of polymers with two‐dimensional configuration side chain and match selection of donor units.

chemistry, multidisciplinary,green & sustainable science & technology
Dithienobenzoxadiazole-based wide bandgap donor polymers with strong aggregation properties for the preparation of efficient as-cast non-fullerene polymer solar cells processed using a non-halogenated solvent

Haiying Jiang,Guoming Qin,Lianjie Zhang,Feilong Pan,Zhuhao Wu,Qian Wang,Guanzhao Wen,Wei Zhang,Yong Cao,Junwu Chen

DOI: https://doi.org/10.1039/d0tc04909c

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:The efficient as-cast polymer solar cells processed by non-halogenated solvent are achieved through new dithienobenzoxadiazole-based wide bandgap donor polymers with strong aggregation property.

materials science, multidisciplinary,physics, applied
Alkyl Branching Sites on π-Spacers for Dipyran-Based High-Efficiency Organic Solar Cells

Shuaishuai Shen,Lisi Yang,Yu Mi,Yuanyuan Zhou,Miao Li,Jianqi Zhang,Long Ye,Jinsheng Song

DOI: https://doi.org/10.1021/acsaem.2c03634

IF: 6.4

2023-01-05

ACS Applied Energy Materials

Abstract:The configuration of A-π-D-π-A type is one effective way for nonfullerene acceptor (NFA) design to achieve excellent photovoltaic performance with reduced synthetic complexity. Additional side chain engineering either around the center or at the terminus of the D core has been widely adopted in the molecular optimization of A-D-A type NFAs. Herein, the branch alkyl and branched sites of the side chains on π-spacers of A-π-D-π-A type acceptors are carefully evaluated, where dipyran ladder-type core Ph-DTDP i is employed as the D core. All three dipyran-based acceptors have been fully characterized and distinct behaviors have been detected in solid UV–vis absorption spectra, molecular stacking orientation, and miscibility with the polymer donor accompany with the side chain alternation. The balanced crystallization characteristics and good miscibility endows the blend film of DTDP i -C2:PBDB-T with a uniform morphology containing even smaller nanoscopic structures with interweaved fibers and balls, which enlarges the donor–acceptor contact and facilitates efficient exciton diffusion and separation. Hence, Ph -DTDP i -C2-based devices achieved a high PCE of 12.4% with a high J SC of 21.88 mA/cm2 and significantly enhanced FF of 69.26%. In short, adjusting the alkyl branch point on the π bridge is an effective strategy for dipyran-based acceptor and future molecular design.

materials science, multidisciplinary,chemistry, physical,energy & fuels
A polymer acceptor with double-decker configuration enhances molecular packing for high-performance all-polymer solar cells

Han Yu,Yan Wang,Chung Hang Kwok,Rongkun Zhou,Zefan Yao,Subhrangsu Mukherjee,Aleksandr Sergeev,Haixia Hu,Yuang Fu,Ho Ming Ng,Li Chen,Di Zhang,Dahui Zhao,Zilong Zheng,Xinhui Lu,Hang Yin,Kam Sing Wong,Harald Ade,Chen Zhang,Zonglong Zhu,He Yan

DOI: https://doi.org/10.1016/j.joule.2024.06.010

IF: 46.048

2024-08-23

Joule

Abstract:Away from traditional "end-to-end" linking, we have constructed a polymer acceptor for organic solar cells using "core-to-core" polymerization in order to free the halogenated end groups for better molecular packing. This strategy results in a unique "double-decker" structure that features intramolecular packing, which helps ensure a rigid polymer conformation. Ternary devices incorporating this acceptor have achieved an outstanding efficiency of 18.7%, thanks to enhanced absorption, morphology, exciton dynamics, and reduced energy loss.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Dithienosilole-benzothiadiazole-based Ternary Copolymers with a D1–A–D2–A Structure for Polymer Solar Cells

Xuelong Huang,Guichuan Zhang,Cheng Zhou,Liqian Liu,Yaocheng Jin,Shengjian Liu,Lei Ying,Fei Huang,Yong Cao

DOI: https://doi.org/10.1039/c5py00201j

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:A series of regularly alternating D1–A–D2–A type of ternary copolymers were synthesized for the application in polymer solar cells.
D-A Copolymers Based on 6,7-Difluoroquinoxaline: Synthesis and Polymer Solar Cells

刘迅成,蔡平,陈军武,曹镛

DOI: https://doi.org/10.16865/j.cnki.1000-7555.2014.02.001

2014-01-01

Abstract:Fluorinated quinoxaline(FTQ)is an electron-accepting unit to construct D-A conjugated polymers for polymer solar cells(PSC). In this work, a new synthetic route from a new starting material was proposed for the FTQ monomer, from which FTQ-based new copolymers FTQ-4T and FTQ-1T with quaterthiophene(4T)and single thiophene(1T)as the D-unit, respectively,were successfully synthesized. The molecular weights, thermal properties, UV-vis absorptions, energy levels, and photovoltaic performances of the two copolymers were evaluated.Polymer solar cells show power conversion efficiencies of 0.73% and 1.28% for PFTQ-4T and PFTQ-1T, respectively. Too low LUMO levels of the two copolymers should be responsible for their not high power conversion efficiencies.
Improving Structural Order for a High‐Performance Diketopyrrolopyrrole‐Based Polymer Solar Cell with a Thick Active Layer

jing gao,letian dou,wei chen,chunchao chen,xuanrong guo,jingbi you,brion bob,weihsuan chang,joseph strzalka,cheng wang,gang li,yang yang

DOI: https://doi.org/10.1002/aenm.201300739

IF: 27.8

2014-01-01

Advanced Energy Materials

Abstract:A series of low-bandgap polymers based on thienyl benzodithiophene (BDTT) and furan-substituted diketopyrrolopyrrole (FDPP) units with different side chains are presented. By replacing the branched ethylhexyl group on the FDPP unit with linear side chains, the structural order and carrier mobility of the modified polymers are enhanced accordingly. The power conversion efficiencies (PCE) of single-junction devices based on polymers of this series are improved from approximate to 5% to approximate to 7%. More importantly, devices made from the modified polymers show excellent photovoltaic performance with a thick active layer of up to 360 nm, a very promising characteristic for the industrial implementation of polymer solar cell devices.
Conjugated Donor–Acceptor Terpolymers Toward High‐Efficiency Polymer Solar Cells

Dongfeng Dang,Donghong Yu,Ergang Wang

DOI: https://doi.org/10.1002/adma.201807019

IF: 29.4

2019-01-01

Advanced Materials

Abstract:The development of conjugated alternating donor-acceptor (D-A) copolymers with various electron-rich and electron-deficient units in polymer backbones has boosted the power conversion efficiency (PCE) over 17% for polymer solar cells (PSCs) over the past two decades. However, further enhancements in PCEs for PSCs are still imperative to compensate their imperfect stability for fulfilling practical applications. Meanwhile development of these alternating D-A copolymers is highly demanding in creative design and syntheses of novel D and/or A monomers. In this regard, when being possible to adopt an existing monomer unit as a third component from its libraries, either a D ' unit or an A ' moiety, to the parent D-A type polymer backbones to afford conjugated D-A terpolymers, it will give a facile and cost-effective method to improve their light absorption and tune energy levels and also interchain packing synergistically. Moreover, the rationally controlled stoichiometry for these components in such terpolymers also provides access for further fine-tuning these factors, thus resulting in high-performance PSCs. Herein, based on their unique features, the recent progress of conjugated D-A terpolymers for efficient PSCs is reviewed and it is discussed how these factors influence their photovoltaic performance, for providing useful guidelines to design new terpolymers toward high-efficiency PSCs.
Photovoltaic Properties of DPP-based Two- and Three-component Polymers

Zhong-qiang Zhang,Zhi-xi Liu,Kang-rong Yan,Huan-bin Li,Wen-qing Liu,Xin-hui Lu,Han-ying Li,Hong-zheng Chen,Chang-zhi Li

DOI: https://doi.org/10.11777/j.issn1000-3304.2018.17253

2018-01-01

Acta Polymerica Sinica

Abstract:Diketopyrrolopyrrole (DPP) is attractive for building conjugated polymers for polymer solar cell (PSC) and organic field effect transistor (OFET). Yet the usual access to DPP conjugated polymers is via donor-acceptor (D-A) two-component polymerization. However, the number of excellent polymers based on the D-A combination is still limited, which promotes researchers to explore new strategy for preparation of novel conjugated polymers and to understand their structure-property relationship. In this work, a DPP-based polymer P1 was first obtained with co-polymerization of DPP (A) and alkoxyl benzene (D). Further, two novel polymers (P2 and P3) were developed via introducing a third electron-deficient monomer X (difluoro-benzothiadiazole or naphthalene diimide) in the polymerization process. P1 - P3 polymers (molecular weight: 3.83 x 10(4), 5.30 x 10(4) and 6.56 x 10(4)) showed good solubility in common organic solvents. Due to the hybridization of the molecular orbitals between their three components (D, A and X), P2 and P3 showed narrower bandgaps (1.26 and 1.27 eV) than P1, and their absorption thus red-shifted up to 1000 nm in comparison to that of D-A polymer P1 (bandgap of 1.50 eV). The introduction of electron-deficient monomers also deepened the highest occupied molecular orbital (HOMO) levels of P2 and P3 to -5.28 and -5.33 eV, which was beneficial to a larger open circuit voltage (V-OC) in PSCs. Moreover, the introduction of the third monomer X altered the film properties of the polymers. It showed that P1 with preference of face-on orientation exhibited a good power conversion efficiency (PCE) in PSCs, while P2 demonstrated an improved hole mobility in OFET due to the preferable edge-on orientation. When blended with [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM), P1 showed a PCE of 2.56%, with a V-OC of 0.68 V, a short circuit current density (J(SC)) of 5.71 mA cm(-2) and a fill factor (FF) of 0.66, while P2 gave a lower PCE of 1.79%, with a V-OC of 0.71 V, a J(SC) of 3.91 mA cm(-2) and a FF of 0.65. This work provides references for the design of novel conjugated polymers for PSCs and OFETs.
Fluorinated Phenanthrenequinoxaline-Based D-A Type Copolymers for Non-Fullerene Polymer Solar Cells

Ming Liu,Zhi Zheng,Xingjian Jiang,Fengyun Guo,Genene Tessema Mola,Shiyong Gao,Liancheng Zhao,Yong Zhang

DOI: https://doi.org/10.1016/j.polymer.2022.124867

IF: 4.6

2022-01-01

Polymer

Abstract:Three polymers with indacenodithiophene (IDT) as the electron-rich unit and phenanthrenequinoxaline (phanQ) or fluorine substituted phenanthrenequinoxaline (FphanQ, 2FphanQ) as the electron-deficient units have been synthesized. The band gaps of PIDT-phanQ, PIDT-FphanQ, PIDT-2FphanQ were estimated to be 1.68, 1.68 and 1.71 eV with a HOMO energy level of -5.28, -5.33 and -5.41 eV, respectively. The photovoltaic performance of the three polymers in non-fullerene polymer solar cells with Y6 as the acceptor material was carefully investigated. The corresponding devices showed improved V-oc as the fluorine atom increased in the phanQ unit, but the champion PCE was achieved in the PIDT-FphanQ:Y6 based device due to its higher J(sc) and FF. The best PCE was recorded to be 11.6% with a V-oc of 0.79 V, a J(sc) of 21.4 mA cm(-2) and a FF of 68.7% for the PIDT-FphanQ:Y6 blend without using additives. The results indicate that the proper design in donor and acceptor units of D-A conjugated polymer, i.e. introducing the moderate fluorine substitutes, will be able to simplify the processing for the efficient PSCs applications.
Synthesis and Optoelectronic Applications of Dπ–pπ Conjugated Polymers with a Di‐metallaaromatic Acceptor

Shiyan Chen,Lingwei Feng,Lixia Peng,Xiang Gao,Yongfa Zhu,Liulin Yang,Dafa Chen,Kai Zhang,Xugang Guo,Fei Huang,Haiping Xia

DOI: https://doi.org/10.1002/anie.202305489

2023-01-01

Angewandte Chemie

Abstract:AbstractThe development of conjugated polymers especially n‐type polymer semiconductors is powered by the design and synthesis of electron‐deficient building blocks. Herein, a strong acceptor building block with di‐metallaaromatic structure was designed and synthesized by connecting two electron‐deficient metallaaromatic units through a π‐conjugated bridge. Then, a double‐monomer polymerization methodology was developed for inserting it into conjugated polymer scaffolds to yield metallopolymers. The isolated well‐defined model oligomers indicated polymer structures. Kinetic studies based on nuclear magnetic resonance and ultraviolet–visible spectroscopies shed light on the polymerization process. Interestingly, the resulted metallopolymers with dπ–pπ conjugations are very promising electron transport layer materials which can boost photovoltaic performance of an organic solar cell, with power conversion efficiency up to 18.28 % based on the PM6 : EH‐HD‐4F non‐fullerene system. This work not only provides a facile route to construct metallaaromatic conjugated polymers with various functional groups, but also discovers their potential applications for the first time.
An A2–π–A1–π–A2-type Small Molecule Donor for High-Performance Organic Solar Cells

Qian Zhang,Yanna Sun,Xianjie Chen,Zhijing Lin,Xin Ke,Xiaoyuan Wang,Tian He,Shouchun Yin,Yongsheng Chen,Huayu Qiu

DOI: https://doi.org/10.1039/c9tc01251f

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:A new A2–π–A1–π–A2-type small-molecule donor using a strong electron-withdrawing unit as the central unit was synthesized and its photovoltaic performance was investigated.
Side Chain Engineering on Medium Bandgap Copolymers to Suppress Triplet Formation for High-Efficiency Polymer Solar Cells.

Lingwei Xue,Yankang Yang,Jianqiu Xu,Chunfeng Zhang,Haijun Bin,Zhi-Guo Zhang,Beibei Qiu,Xiaojun Li,Chenkai Sun,Liang Gao,Jia Yao,Xiaofeng Chen,Yunxu Yang,Min Xiao,Yongfang Li

DOI: https://doi.org/10.1002/adma.201703344

IF: 29.4

2017-01-01

Advanced Materials

Abstract:Suppression of carrier recombination is critically important in realizing high-efficiency polymer solar cells. Herein, it is demonstrated difluoro-substitution of thiophene conjugated side chain on donor polymer can suppress triplet formation for reducing carrier recombination. A new medium bandgap 2D-conjugated D-A copolymer J91 is designed and synthesized with bi(alkyl-difluorothienyl)-benzodithiophene as donor unit and fluorobenzotriazole as acceptor unit, for taking the advantages of the synergistic fluorination on the backbone and thiophene side chain. J91 demonstrates enhanced absorption, low-lying highest occupied molecular orbital energy level, and higher hole mobility, in comparison with its control polymer J52 without fluorination on the thiophene side chains. The transient absorption spectra indicate that J91 can suppress the triplet formation in its blend film with n-type organic semiconductor acceptor m-ITIC (3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone)-5,5,11,11-tetrakis(3-hexylphenyl)-dithieno[2,3-d:2,3'-d']-s-indaceno[1,2-b:5,6-b']-dithiophene). With these favorable properties, a higher power conversion efficiency of 11.63% with high VOC of 0.984 V and high JSC of 18.03 mA cm-2 is obtained for the polymer solar cells based on J91/m-ITIC with thermal annealing. The improved photovoltaic performance by thermal annealing is explained from the morphology change upon thermal annealing as revealed by photoinduced force microscopy. The results indicate that side chain engineering can provide a new solution to suppress carrier recombination toward high efficiency, thus deserves further attention.

A New Copolymer Based on a D–π–A or D–A–π Repeat Unit for Polymer Solar Cells Employing Non-Halogenated Solvents

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

A-A Strategy Enables Desirable Performance of All-Polymer Solar Cells Fabricated with Nonhalogenated Solvents

An Alternating D–A1–D–A2 Copolymer Containing Two Electron-Deficient Moieties for Efficient Polymer Solar Cells

Low Band‐gap D–A Conjugated Copolymers Based on Anthradithiophene and Diketopyrrolopyrrole for Polymer Solar Cells and Field‐effect Transistors

Development of New Conjugated Polymers with Donor-Pi-Bridge-Acceptor Side Chains for High Performance Solar Cells

Fluorine Substitution Enhanced Photovoltaic Performance of A D-A(1)-D-A(2) Copolymer

Low Band Gap Polymers Incorporating a Dicarboxylic Imide-Derived Acceptor Moiety for Efficient Polymer Solar Cells.

Rational Design Dithieno[3,2‐f:2′,3′‐h]quinoxaline‐Based Polymers with Optimized Molecular Configuration and Charge Transfer for High‐Performance All‐Polymer Solar Cells

Dithienobenzoxadiazole-based wide bandgap donor polymers with strong aggregation properties for the preparation of efficient as-cast non-fullerene polymer solar cells processed using a non-halogenated solvent

Alkyl Branching Sites on π-Spacers for Dipyran-Based High-Efficiency Organic Solar Cells

A polymer acceptor with double-decker configuration enhances molecular packing for high-performance all-polymer solar cells

Dithienosilole-benzothiadiazole-based Ternary Copolymers with a D1–A–D2–A Structure for Polymer Solar Cells

D-A Copolymers Based on 6,7-Difluoroquinoxaline: Synthesis and Polymer Solar Cells

Improving Structural Order for a High‐Performance Diketopyrrolopyrrole‐Based Polymer Solar Cell with a Thick Active Layer

Conjugated Donor–Acceptor Terpolymers Toward High‐Efficiency Polymer Solar Cells

Photovoltaic Properties of DPP-based Two- and Three-component Polymers

Fluorinated Phenanthrenequinoxaline-Based D-A Type Copolymers for Non-Fullerene Polymer Solar Cells

Synthesis and Optoelectronic Applications of Dπ–pπ Conjugated Polymers with a Di‐metallaaromatic Acceptor

An A2–π–A1–π–A2-type Small Molecule Donor for High-Performance Organic Solar Cells

Side Chain Engineering on Medium Bandgap Copolymers to Suppress Triplet Formation for High-Efficiency Polymer Solar Cells.