Abstract:<section class="article-section__content">Room‐temperature‐processed TiO2 (R‐Lt‐TiO2) electron transporting layers (ETLs) possess low conductivity and connectivity, resulting in poor photovoltaic performance. Herein, an ethanol (EtOH)‐soluble, highly conducting fullerene derivative, C60RT6, was used as an additive for Lt‐TiO2 ETLs. Room‐temperature processed nanocomposite ETL (R‐Fu/Lt‐TiO2) is prepared simply by spin coating a C60RT6 and G‐TiO2 NPs (TiO2 nanoparticle prepared by grinding the bulk TiO2 powder) mixture. R‐Fu/Lt‐TiO2 has better aligned with the frontier orbitals of the FAxMA1−xPbI3, better continuity, conductivity, flatness, and higher surface hydrophilicity compared to Lt‐TiO2 ETL. Perovskite films spin coated on R‐Fu/Lt‐TiO2 ETLs also have slightly larger grains and thickness compared to those deposited on Lt‐TiO2. Perovskite solar cells (PSCs) based on a R‐Fu/Lt‐TiO2 ETL possess higher power conversion efficiency (PCE, up to 20% on glass substrate), less (negligible) current hysteresis, and better long‐term stability compared to those using R‐Lt‐TiO2 as an ETL. The flexible PSC (used indium tin oxide/polyethylene terephthalate (ITO/PET) as a substrate) with a R‐Fu/Lt‐TiO2 ETL achieves a PCE of 18.06% and retains 90% of the initial PCE after 500 bending cycles with a bending radius of 6 mm. The PCE of the flexible cell with a Lt‐TiO2 ETL is only 8.2%, and loses 60% of the initial value after 500 bending cycles. </section>

Interfacing Pristine C60 Onto TiO2 for Viable Flexibility in Perovskite Solar Cells by a Low‐Temperature All‐Solution Process

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Low‐Temperature in Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells

Interfacial Engineering for Efficient Low-Temperature Flexible Perovskite Solar Cells.

SnO2 Surface Modification and Perovskite Buried Interface Passivation by 2,5‐Furandicarboxylic Acid for Flexible Perovskite Solar Cells

Enhanced flexibility and light utilization for high-efficiency all-air-processed carbon-based perovskite solar cells

Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility.

Stable Inverted Planar Perovskite Solar Cells with Low‐Temperature‐Processed Hole‐Transport Bilayer

Low temperature ZnO/TiOx electron-transport layer processed from aqueous solution for highly efficient and stable planar perovskite solar cells

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Efficient and Stable Solution-Processed Planar Perovskite Solar Cells Via Contact Passivation

Tailoring Perovskite Adjacent Interfaces by Conjugated Polyelectrolyte for Stable and Efficient Solar Cells

Room‐Temperature‐Processed Fullerene/TiO 2 Nanocomposite Electron Transporting Layer for High‐Efficiency Rigid and Flexible Planar Perovskite Solar Cells

Enhancing Electron Transport Via Graphene Quantum Dot/sno2 Composites for Efficient and Durable Flexible Perovskite Photovoltaics

ETL-Free Perovskite Solar Cells with an Efficiency of 19.81% in Open Air

The interfacial embedding of halogen-terminated carbon dots produces highly efficient and stable flexible perovskite solar cells

Low‐Temperature Solution‐Processed ZnO Electron Transport Layer for Highly Efficient and Stable Planar Perovskite Solar Cells with Efficiency over 20%

Enhanced Particle‐to‐Particle Interaction of Tin Oxide Electron Transporter Layer for Scalable Flexible Perovskite Solar Cells

23.81%-Efficiency Flexible Inverted Perovskite Solar Cells with Enhanced Stability and Flexibility via a Lewis Base Passivation

Interface Engineering of TiO2/perovskite Interface Via Fullerene Derivatives for High Performance Planar Perovskite Solar Cells