Abstract:In this study, the oxygen evolution kinetics and oxide layer properties of Pb–0.8%Ag rolled-alloy anodes were investigated during 15d of galvanostatic electrolysis in an acidic zinc sulfate electrolyte solution containing 600mg·L−1 Cl− ions. Cyclic voltammetry, quasistationary polarization, and electrochemical impedance spectroscopy were used to investigate the anode process. The microscopic morphology and phase composition of the anodic oxide layers were observed by scanning electron microscopy and X-ray diffraction, respectively. The observable variations in the electrocatalytic activity and reaction kinetics of the anodes during electrolysis indicate the formation and stabilization of the anodic oxide layer. With prolonged electrolysis, the oxygen evolution overpotential in the anodes mainly exhibited a decreasing trend, which is contrary to the trend of the electrode surface exchange current density. This depolarization may have been caused by the increasing roughness of the anodic surface and the catalytic effects of α-PbO2 and β-PbO2. As electrolysis continued, the cathodic peak (α-PbO2→PbSO4) mainly showed an increasing trend and gradually moved toward the negative direction. After 15days of electrolysis, the oxide layers exhibited a severely corrosive microstructure with plenty of cavities and etch pits. The uniform, well-defined crystal grains and regularity were not appeared. The phase composition of the anodic oxide layer was formed after 6d of electrolysis. α-PbO2 proved to be the main peak and showed preferential growth orientations along the (111) planes of the anodic oxide layer.

Electrochemical Properties of Pb-0.6 Wt% Ag Powder-Pressed Alloy in Sulfuric Acid Electrolyte Containing Cl−/Mn2+ Ions

Electrochemical Behaviors of Powder-Processed Pb-Ag Anodes

Electrochemical Behavior of Rolled Pb–0.8%Ag Anodes in an Acidic Zinc Sulfate Electrolyte Solution Containing Cl− Ions

Electrochemical Performances of Al/Pb-Ag-Sn Anode for Zinc Electrowinning

Electrochemical Behavior of Pb-Ag-Bi Alloys As Anode in Zinc Electrowinning

Electrochemical Performance of a New Type Aluminum Foam/Pb-0.6 Wt%ag Alloy Composite Anode for Zinc Electrowinning Industry

Anodic Behavior of Pb-Ag-Ca-Sr Alloy in Zinc Electrowinning

Polarization behavior of Pb–Co powder-pressed alloy for electrowinning

Effect of Ag Content and beta-PbO2 Plating on the Properties of Al/Pb-Ag Alloy

Effects of Intermetallic Phases on Electrochemical Properties of Powder Metallurgy Mg-6%Al-5%Pb Anode Alloy Used for Seawater Activated Battery

Effect of Ag Content and Β-Pbo2 Plating on the Properties of Al/Pb-Ag Alloy

Preparation and Properties of Al/Pb-Ag-Co Composite Anode Material for Zinc Electrowinning

Electrochemical Behavior of Pb-Co Anodes in Sulfuric Acid Electrolyte Containing Cl- Ions

Oxygen evolution and corrosion behavior of low-MnO 2 -content Pb-MnO 2 composite anodes for metal electrowinning

Influence of Zinc on Electrochemical Discharge Activity of Mg-6%Al-5%Pb Anode

Electrochemical Corrosion Behaviors of Pb-Ag Anodes by Electric Current Pulse Assisted Casting

Electrochemical properties of powder-pressed Pb–Ag–PbO2 anodes

Effect of Current Densities on the Electrochemical Behavior of a Flat Plate Pb-Ag Anode for Zinc Electrowinning

A Novel Porous Pb–Ag Anode for Energy-Saving in Zinc Electro-Winning

Anodization Behavior on Pb-Ag-Ca-Sr Alloy During Zinc Electrowinning

Effect of the Sn Addition on the Electrochemical Properties of Al/Pb Anodes and Its Application in Zinc Electrowinning