Abstract:The goal of this research was to propose a combined modeling approach to design a stable alloy based on the FeMnNiCoMo system. First, phase stability calculations were made using valence electron calculations (VEC) and density functional theory (DFT) methods. The effect of Mo alloying in the FeMnNiCo system was investigated by calculating characteristics of solid solution combined with the different methods. The DFT method was used to obtain formation enthalpy in the (FeMnNiCo)100–xMox system for stable face-centered-cubic (fcc) and body-centered-cubic (bcc) structures. The calculations were made for Mo contents from 0 to 20 at. pct. Classic thermodynamic calculations, such as mixing enthalpy, configurational entropy, or valence electron concentration (VEC), were used. Based on these calculations, the proposed alloy should be characterized by fcc structure in the entire considered Mo content, without occurrence of any intermetallic phases. Subsequently, three alloys with 0, 5, and 10 at. pct Mo were produced using arc melting and were further investigated. Alloys were homogenized and then hot rolled into flat bars. Microstructural analysis was performed using as-cast, after-homogenization, and hot-rolled specimens. The microstructures were characterized by means of scanning electron microscopy–energy-dispersive spectroscopy (EDS) analysis. Mechanical properties were evaluated using tensile and compression tests. In addition, X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses were also conducted. The results from EDS and XRD showed the occurrence of intermetallic phases in investigated alloys, as phase with Fm3-m space group and in µ phase in (FeMnNiCo)90Mo10 alloy. Based on the comparison of the experimental and calculated results, conclusions regarding the structural changes with Mo content were drawn and the validity of the proposed modeling approach was tested and discussed.

Reassessment of the Ni–V system and a new thermodynamic modeling of the Mo–Ni–V system

Assessment of Mobilities of the B2 Phase in the Nickel-Chromium-Aluminum System

Thermodynamic Modeling of the Ni–Nb–V Ternary System

Experimental Investigation and Thermodynamic Assessment of the Mo–Ni–Zr Ternary System

The Effects of Key Elements Re and Ru on the Phase Morphologies and Microstructure in Ni-based Single Crystal Superalloys

Thermodynamic Reassessment of the C-Ni-Si System Using a Four Sublattice Model for Ordered/Disordered fcc Phases

Thermodynamic Assessment of the Fe–Mn–Ni System and Diffusion Mobility of Its Face-Centered Cubic Phase

Inversion calculation of the interatomic potentials for Ni0.75AlxMo0.25-x alloy employing microscopic phase-field model

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Thermodynamic Assessment of the C–Nb–V Ternary System over the Whole Composition and Temperature Ranges

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system

A Database for the Fe-Cr-Mo-Ni-N System

Thermodynamic Description of Phase Equilibria in the C–Mo–W–N Quaternary System

Thermodynamic Modeling of B–Mo–Nb Ternary System with Modified B–Nb Description

Experimental investigation and thermodynamic reassessment of La-Ni and LaNi5-H systems

Theoretical study of the crystal structure, stability, and properties of phases in the V-N system

Thermodynamic stability, electronic structure and mechanical properties of Mo-Re binary alloys: A first-principles calculations

Experimental Investigation and Thermodynamic Assessment of Phase Equilibria at the Ti-Mn side in the Ti-Mn-Mo Ternary System

Effect of Mo on Phase Stability and Properties in FeMnNiCo High-Entropy Alloys

Partitioning Behavior and Lattice Misfit of Γ/γ′ Phases in Ni-based Superalloys with Different Mo Additions

Possibility and stabilizing effect of Mo clusters in the Ni-based single-crystal superalloy