Abstract:The gun barrel erosion caused by the burning of high energy propellants is becoming increasingly severe, significantly reducing the useful life of gun barrel. In order to address this problem, erosion reducing additives, including TiO2, paraffin, polyurethane or a combination of these, were introduced into the gun propellant or propellant charge system to alleviate the gun barrel erosion. In this article, a new type of flexible phase change composite materials (FPCMs) having excellent thermal stability and superior mechanical performance was successfully designed by incorporating paraffin/BN@PMMA (microPCMs) mixed with different binders of waterborne polyurethane (WPU), carboxylic butadiene-styrene latex (cBSL), and butadiene-styrene latex (BSL) on the fabric surface and applied as protective liners of cartridge case. Therein, the microPCMs was constructed with paraffin as the core and polymethyl methacrylate (PMMA) enforced by nano boron nitride (BN) as the shell by Pickering emulsion polymerization method. The morphology, chemical composition, and phase change behaviors of these prepared FPCMs were analyzed by SEM, FTIR, and DSC, respectively. Results show that these microPCMs with spherical structure but a little rough surface could be evenly distributed in the warp and weft structure of pristine fabric. The resulting FPCM sample containing WPU has the highest phase change latent heat of 38.77 J/g among these FPCMs. Additionally, TG and isothermal TG experiments reveal that the incorporation of binders has a positive effect on FPCMs thermal stability and FPCM sample containing cBSL exhibit the most remarkable thermal stability. The tensile experiments demonstrate that these FPCMs display the desirable mechanical performance and exhibit brittle fraction model. The tensile strength and elongation at break of FPCMs can be enhanced by the introducing of these binders. Pretreating pure fabric with gelatin is proved to be the most effective way in improving the mechanical performance of FPCMs. Herein, FPCM containing WPU has the highest ultimate tensile strength that can be up to 293.53 MPa. The novel flexible phase change composite materials could be a promising candidate to be used as protective liners to reduce the gun barrel erosion induced by the combustion of high energy propellants.

Thermal and Mechanical Reinforcement of a Novel Paraffin-Based Hydroxyl-Terminated Polybutadiene (HTPB) Binder Containing a Three-Dimension (3D) Diurea–paraffin Wax (DU–PW) for Prevention of PW Leakage

A novel form-stable paraffin-based hydroxyl-terminated polybutadiene binder containing microencapsulated paraffin wax

Enhanced thermal and mechanical properties of PW-based HTPB binder using polystyrene (PS) and PS-SiO2 microencapsulated paraffin wax (MePW)

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Thermal Property Enhancement of Paraffin-Wax-Based Hydroxyl-Terminated Polybutadiene Binder with a Novel NanoSiO(2)-Expanded Graphite-PW Ternary Form-Stable Phase Change Material

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Synthesis and Characterization of a Novel Hydroxy Telechelic Polyfluoroether to Enhance the Properties of HTPB Solid Propellant Binders

Litchi-like Core-Shell HMX@HPW@PDA Microparticles for Polymer-Bonded Energetic Composites with Low Sensitivity and High Mechanical Properties.

Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

Chemical Modification Of Hydroxyl-Terminated Polybutadiene And Its Application In Composite Propellants

Design and characterization of novel flexible phase change composite materials as protective liners for the cartridge case

The Effect of a Novel of Hyperbranched Cross-Linking Agent on the Mechanical of Hydroxyl-Terminated Polybutadiene Based Solid Propellant

Synthesis and characterization of hydroxyl-terminated polybutadiene modified low temperature adaptive self-matting waterborne polyurethane

Structure and Oil‐resistant Properties of HTPB‐based Polyurea Modified with Polysulfide

Sensitive phase separation behavior of ultra-high molecular weight polyethylene in polybutene

Devising a composite membrane with a creeper sucker structure to enhance the interfacial performance and desensitization of CL-20

Self-healing improves the stability and safety of polymer bonded explosives

Hydroxyl‐terminated polybutadiene based waterborne polyurethane acrylate emulsions: Synthesis, characterization, and damping property

Synergistic enhancement of phase change materials through three-dimensional porous layered covalent triazine framework/expanded graphite composites for solar energy storage and beyond