Abstract:It is difficult to enhance the blue or purple luminescence efficiency of organic light-emitting device ( OLED) for practice display applications. In this work, aluminum nano particles (Al-NPs) are inserted into the light-tight TmPyPb electron transporting layer (ETL) of ITO/PEDOT:PSS/TAPC/BCzVBi:BCPO/TmPyPb/Liq/Al OLEDs, in which BCzVBi can emit deep-blue fluorescent light, with the attempts to overcome the above deficiency through the local surface plasmon polariton(LSPP) effect excited in Al-NP at higher resonance frequencies by the luminescence radiations from BCzVBi. The distances of Al-NPs from BCzVBi:BCPO fluorescent layer are chosen as x = 4, 8, 12 nm. The morphologies observed by atom force microscope and scan electron microscope show that the Al film with a thickness of 1 nm, deposited at room temperature by vacuum heat evaporate, is composed of separated Al grains (therefore, called Al-NPs) with sizes on a 10 nm scale. By inserting these Al-NPs into the TmPyPb ETL, both the current density and luminance at the same voltage decrease in comparison with the counterparts of reference devices (i.e. ones without Al-NPs) due to the worsened carrier mobility. However, the current density and luminance both rebound significantly at x = 8 nm. This may be due to the fact that the fluorescence quenching strongly occurs at x < 8 nm, and on the other hand, the local surface plasmon polariton is weakened too much at x > 8 nm due to attenuated radiation from BCzVBi. At x = 8 nm, the voltage (9 V) at which the luminance reaches a maximum value is the same as that for the reference device, but the maximum luminance itself decreases from 4200 Cd/m 2 to 3500 Cd/m 2 . However, the current density also decreases from 335.19 mA/cm 2 to 145.71 mA/cm 2 . This conversely results in a promising great increase of current efficiency from 0.88 Cd·A –1 to 2.36 Cd·A –1 . Subsequently, the external quantum efficiency (EQE) is enhanced by 170%, while the efficiency roll-off ratio decreases from 78% to 30.5%, with a decrement of 61% . At a high current density of 270 mA/cm 2 , EQE enhances 66.5%. The coupling between fluorescence excitation state and local surface plasmon polariton is determined by the overlapping between fluorescence emitting peak and plasmon resonance peak. As aluminum has a number density of free electrons, 18.1×10 22 cm –3 , much larger than those for the other normally used metals (such as gold and silver), its spectrum of local surface plasmon polariton is enough to cover the fluorescence wavelength range of BCzVBi. These research results show that the luminescence efficiency of deep-blue OLEDs can be turned better by LSPP excited in Al-NPs at higher resonance frequencies.

Improved electron injection and efficiency in blue organic light-emitting diodes using coupled electric field near cathode

Enhancement of Light Extraction Efficiency and Suppression of Roll‐Off Characteristics of Thermally Activated Delayed Fluorescence Organic Light‐Emitting Diodes by Inserting Nanoscale Pixel‐Defining Layer

High-frequency localized surface plasmon polariton effects of Al nanoparticles on deep-blue BCzVBi OLEDs

Influence of High-frequency localized surface plasmon polariton effect of Al nanoparticles on luminescence efficiency of deep-blue BCzVBi OLED

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Enhanced Efficiency of Organic Light-Emitting Devices by Using a Directly Imprinted Nanopillared Ultrathin Metallic Electrode.

Enhanced Efficiency of Organic Light-Emitting Devices with Corrugated Nanostructures Based on Soft Nano-Imprinting Lithography

Significant Light Extraction and Power Efficiency Enhancement of Organic Light Emitting Diodes by Subwavelength Dielectric-Nanomesh Using Large-area Nanoimprint

Enhancing Light Extraction of Organic Light Emitting Diodes by Deep-Groove High-index Dielectric Nanomesh Using Large-area Nanoimprint

Creation of High‐Quality Deep‐Blue AIE Emitter with a Crossed Long‐Short Axis Structure for Efficient and Versatile OLEDs

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Enhanced blue-emissive electroluminescence performance with rational donor substitution

Tetraphenylbenzene-based AIEgens: the Horizontally Oriented Emitters for Highly Efficient Non-doped Deep Blue OLEDs and Host for High-Performance Hybrid WOLEDs

Improving the Efficiency of AlEgen-Based Nondoped Blue Organic Light-Emitting Diode by Rational Isomer Engineering

Utilizing Electroplex Emission to Achieve External Quantum Efficiency up to 18.1% in Nondoped Blue OLED

Highly Efficient Organic Blue Electroluminescent Materials and Devices with Mesoscopic Structures

Highly Efficient Blue-Green Organic Light-Emitting Diodes Achieved by Controlling the Anionic Migration of Cationic Iridium(Iii) Complexes

Optimizing Efficiency of Polycrystalline P-Si Anode Organic Light-Emitting Diode

An Efficient Blue Organic Light Emitting Structure

Enhanced performance of blue OLED with water/alcohol soluble conjugated polymer as electron injection layer